Hybrid Polymer Adhesives

Within our range of Hybrid Polymer Adhesives include the Fix-All® Range of Products. Fix-All® branded products combine unique technology, with market leading brand value. Fix-All® products offer simple and effective solutions for all sealing, bonding and filling applications, on all materials in all weather conditions. All Fix-All® products are based on our proprietary SMX® Hybrid Polymer Technology. We also stock G... Read More

Hybrid Polymer Adhesives

Soudal Fix All Flexi 290ml Cartridge
Quick Look

Soudal Fix All Flexi

£3.60 ex. VAT | £4.32 inc. VAT

Soudal Fix All Flexi

Soudal Fix All Flexi

Soudal | SMX® Hybrid Polymer

Fix All Flexi (Formerly named Fix All Classic) is a multi-use Sealant, Adhesive and Filler based on SMX® Hybrid Polymer.

Fix All Flexi can be applied in all weather conditions (including wet and damp surfaces), internally and externally.

Fix All Flexi contains no solvents or odours and has primerless adhesion on most construction materials. Overpaintable with most paints.

Non-staining on porous natural stones. Suitable for sanitary applications.

Benefits

Soudal Fix All Flexi

  • Multi-Use Product

  • Stays elastic after curing and very sustainable

  • Excellent adhesion on nearly all surfaces, even if slightly moist.

  • Can be painted with water based systems

  • No odour.

  • Very low emission, EC1 PLUS R certified

  • Impervious to mould, contains ZnP (biocide with fungicidal action)

  • Does not contain solvents, isocyanates, acids, halogens and toxic components, completely neutral.

  • Colourfast.

  • Good colour stability, weather and UV resistance

Application

Typical Applications:

  • For all bonding, sealing and filling applications in all weather conditions, on most surfaces.

  • Paintable and elastomeric sealing and bonding.

  • Bonding and sealing of porous natural stone surfaces such as marble and limestone.

  • Sanitary sealing and bonding - kitchens, bathrooms, showers etc.

Surface Preparation:

Porous surfaces in water loaded applications should be primed with Soudal Primer 150.

Smooth surfaces should be degreased before bonding them together. We recommend a preliminary adhesion test on every surface.

Fix-All® Flexi has an excellent adhesion on most common substrates: All usual building substrates, natural stone, treated wood, PVC, plastics.

Fix All® Flexi has been tested on the following metal surfaces: Steel, AlMgSi1, brass, electrolytic galvanised steel, AlCuMg1, flame galvanised steel, AlMg3 and steel ST1403.

Fix All® Flexi also has a good adhesion on plastics: Polystyrene, polycarbonate (Makrolon®), PVC, ABS, polyamide, PMMA, fiberglass reinforced epoxy, polyester.

While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding.

NOTE: Bonding plastics like PMMA (e.g. Plexi® glass), polycarbonate (e.g. Makrolon® or Lexan®) in stress loaded applications can give rise to stress cracking and crazing in these substrates. The use of Fix All® Flexi is not recommended in these applications.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application: With manual or pneumatic Caulking Gun.

  • Cleaning: With Sealant Remover immediately after use.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

  • Repair: With the same material

Joint Dimensions:

  • Minimum Width for Bonding: 2 mm

  • Minimum Width for Joints: 5 mm

  • Maximum Width for Bonding: 10 mm

  • Maximum Width for Joints: 30 mm

  • Minimum Depth for Joints: 5 mm

  • Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth

Remarks:

  • Fix All® Flexi may be overpainted with water based paints, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application.

  • The drying time of alkyd resin based paints may increase.

  • Fix All® Flexi can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate etc... may differ from manufacturer to manufacturer, we recommend preliminary compatibility test.

  • Fix All® Flexi can not be used as a glazing sealant.

  • Not suitable for bonding aquariums.

  • Fix All® Flexi can be used for adhering of and sealing on natural stone.

  • When applying, make sure not to spill any sealant on the surface of materials.

  • The sanitary formula should not replace regular cleaning of the joint. Excessive contamination, deposits or soap remainings will stimulate the development of fungi.

  • A total absence of UV can cause a colour change of the sealant.

Data Sheets

Technical Data Sheet

Fix-All® Product Selector

Safety Data Sheet

£3.60 ex. VAT | £4.32 inc. VAT

Soudal Fix All Crystal Clear - 290ml Cartridge
Quick Look

Soudal Fix All Crystal Clear

£4.15 ex. VAT | £4.98 inc. VAT

Soudal Fix All Crystal Clear

Soudal Fix All Crystal Clear

Soudal | SMX® Hybrid Polymer

Soudal Fix All Crystal Clear is a Super Clear multi-use Sealant, Adhesive and Filler based on SMX® Hybrid Polymer.

Fix All Crystal Clear can be applied in all weather conditions (including wet and damp surfaces), internally and externally.

Fix All Crystal Clear contains no solvents or odours and has primerless adhesion on most construction materials. Overpaintable with most paints.

Non-staining on porous natural stones. Also suitable for sanitary applications.

Benefits

Soudal Fix All Crystal Clear

  • Crystal Clear Formulation

  • Excellent adhesion on nearly all surfaces, even if slightly moist.

  • Very good mechanical characteristics.

  • Impervious to mould, contains ZnP (biocide with fungicidal action).

  • Suitable for Sanitary Applications.

  • Good extrudability even at low temperatures.

  • Free of isocyanates, solvents, halogens and acids.

  • Can be painted with all water based paints and many other systems (to be tested).

  • Permanent elastic after curing.

Application

Typical Applications:

  • All common bonding and sealing applications, both in and outdoor.

  • Transparent and elastic bonding in construction and building applications.

  • Invisible bonding of glass and other transparent materials in indoor applications.

  • Joints in bathrooms and kitchens.

Surface Preparation:

Porous surfaces in water loaded applications should be primed with Soudal Primer 150.

Smooth surfaces should be degreased before bonding them together. We recommend a preliminary adhesion test on every surface.

While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding.

NOTE: Bonding plastics like PMMA (e.g. Plexi® glass), polycarbonate (e.g. Makrolon® or Lexan®) in stress loaded applications can give rise to stress cracking and crazing in these substrates. The use of Fix All® Crystal is not recommended in these applications.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application: With manual or pneumatic Caulking Gun.

  • Cleaning: With Sealant Remover immediately after use. Cured Fix-All® can only be removed mechanically.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

  • Repair: With the same material

Joint Dimensions:

  • Minimum Width for Bonding: 1 mm

  • Minimum Width for Joints: 5 mm

  • Maximum Width for Bonding: 3 mm

  • Maximum Width for Joints: 10 mm

  • Minimum Depth for Joints: 5 mm

Remarks:

  • Fix All® Crystal is paintable with water-based paints, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application.

  • The drying time of alkyd resin based paints may increase.

  • Fix All® Crystal can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we recommend preliminary compatibility test.

  • Fix All® Crystal is not suitable for expansion joints.

  • Do not use in applications where continuous water immersion is possible.

  • Fix All® Crystal has a good UV resistance but can discolour under extreme conditions or after very long UV exposure.

  • Fix All® Crystal can not be used as a glazing sealant.

  • Not suitable for bonding aquariums.

  • Fix All® Crystal cannot be used on natural stone. Because the adhesion surface will discolour under influence of the sealant (looks wet) and because this is visible through the crystal clear sealant it seems like staining has occurred.

  • The sanitary formula should not replace regular cleaning of the joint. Excessive contamination, deposits or soap remainings will stimulate the development of fungi.

Data Sheets

Technical Data Sheet

Fix-All® Product Selector

Safety Data Sheet

£4.15 ex. VAT | £4.98 inc. VAT

Soudal Fix All High Tack - 290ml Cartridge
Quick Look

Soudal Fix All High Tack

£4.15 ex. VAT | £4.98 inc. VAT

Soudal Fix All High Tack

Soudal Fix All High Tack

Soudal | SMX® Hybrid Polymer

Fix All High Tack is a Super Strong Sealant, Adhesive and Filler based on SMX® Hybrid Polymer.

Fix All High Tack can be applied in all weather conditions (including wet and damp surfaces), internally and externally.

Fix All High Tack contains no solvents or odours. Primerless adhesion on most construction materials. Overpaintable with most paints.

Fix All High Tack is non-staining on porous natural stones and is suitable for sanitary applications.

Benefits

Soudal Fix All High Tack

  • Super Strong

  • High initial tack reducing the need for initial support.

  • Fast curing

  • Good extrudability

  • High shear strength after full cure (no primer)

  • Stays elastic after curing and very sustainable

  • Impervious to mould, contains ZnP (biocide with fungicidal action)

  • No odour.

  • Can be painted with water based systems

  • Good colour stability, weather and UV resistance

  • Does not contain isocyanates and no silicones

  • Good adhesion on moist substrates

Application

Typical Applications:

  • Sealing and bonding in the building and construction industry.

  • Heavy duty bonding in all weather condition, on most surfaces.

  • Elastic bonding of panels, profiles and other pieces on the most common substrates (wood, MDF, chipboard, etc).

  • Elastic structural bonding in car and container industry.

  • Joints in bathrooms and kitchens.

Surface Preparation:

Porous surfaces in water loaded applications should be primed with Soudal Primer 150.

Smooth surfaces should be degreased before bonding them together. We recommend a preliminary adhesion test on every surface.

While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding.

NOTE: Bonding plastics like PMMA (e.g. Plexi® glass), polycarbonate (e.g. Makrolon® or Lexan®) in stress loaded applications can give rise to stress cracking and crazing in these substrates. The use of Fix All® High Tack is not recommended in these applications.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application: With manual or pneumatic Caulking Gun.

  • Cleaning: With Sealant Remover immediately after use. Cured Fix-All® can only be removed mechanically.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning. 

  • Repair: With the same material

Joint Dimensions:

  • Minimum Width for Bonding: 2 mm

  • Minimum Width for Joints: 5 mm

  • Maximum Width for Bonding: 10 mm

  • Maximum Width for Joints: 30 mm

  • Minimum Depth for Joints: 5 mm

  • Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth

Remarks:

  • Fix-All® High Tack may be overpainted with water based paints, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application.

  • The drying time of alkyd resin based paints may increase.

  • Fix-All® High Tack can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we recommend preliminary compatibility test.

  • While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding. For optimum adhesion the use of Soudal Surface Activator is recommended.

  • Fix-All® High Tack can NOT be used as a glazing sealant.

  • Not suitable for bonding aquariums.

  • Fix-All® High Tack can be used for bonding of natural stone, but it cannot be used as a joint sealant on this type of surface. Fix-All® High Tack can therefore only be used on the bottom of natural stone tiles.

  • When applying, make sure not to spill any sealant on the surface of materials.

  • The sanitary formula should not replace regular cleaning of the joint. Excessive contamination, deposits or soap remainings will stimulate the development of fungi.

Data Sheets

Technical Data Sheet

Fix-All® Product Selector

Declaration of Performance (DoP)

Safety Data Sheet

£4.15 ex. VAT | £4.98 inc. VAT

Soudal Fix All High Tack 'Invisible' - 290ml Cartridge
Quick Look

Soudal Fix All High Tack 'Invisible'

£5.75 ex. VAT | £6.90 inc. VAT

Soudal Fix All High Tack 'Invisible'

Soudal Fix All High Tack 'Invisible'

Soudal | SMX® Hybrid Polymer

Fix All High Tack INVISIBLE is a Super Strong, Super Clear Adhesive with High Initial Tack.

Fix All High Tack Invisible can be applied in all weather conditions, internally and externally.

Fix All High Tack Invisible is virtually odourless with primerless adhesion on most construction materials, including wet and damp surfaces. Can be overpainted with most paints. Non-yellowing and UV Resistant. Very high mechanical properties.

Benefits

Soudal Fix All High Track 'Invisible'

  • High initial tack reducing the need for initial support.

  • Fast curing

  • Good extrudability

  • High shear strength after full cure

  • Stays elastic after curing and very sustainable

  • No odour.

  • Does not contain isocyanates and no silicones

  • Solvent free

  • Good adhesion on slightly moist substrates

Application

Typical Applications:

  • Transparent and elastic bonding in construction and building applications.

  • Elastic bonding of panels, profiles and other pieces on the most common substrates (wood, MDF, chipboard, etc).

Surface Preparation:

Porous surfaces in water loaded applications should be primed with Soudal Primer 150.

Smooth surfaces should be degreased before bonding them together. We recommend a preliminary adhesion test on every surface.

While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding.

NOTE: Bonding plastics like PMMA (e.g. Plexi® glass), polycarbonate (e.g. Makrolon® or Lexan®) in stress loaded applications can give rise to stress cracking and crazing in these substrates. The use of Fix All® High Tack is not recommended in these applications.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application: With manual or pneumatic Caulking Gun.

  • Cleaning: With Sealant Remover immediately after use. Cured Fix-All® can only be removed mechanically.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning. 

  • Repair: With the same material

Remarks:

  • Fix-All® High Tack Invisible may be overpainted with water based paints, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application.

  • The drying time of alkyd resin based paints may increase.

  • Fix-All® High Tack Invisible can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we recommend preliminary compatibilty test.

  • While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding. For optimum adhesion the use of Soudal Surface Activator is recommended.

  • Fix-All® High Tack Invisible cannot be used on natural stone as the adhesion surface will discolour under influence of the sealant (looks wet) and because this is visible through the crystal clear sealant it seems like staining has occurred.

  • Fix-All® High Tack Invisible can not be used as a glazing sealant.

  • Not suitable for bonding aquariums.

  • Fix-All® High Tack Invisible can discolour under extreme conditions or after very long UV exposure.

Data Sheets

Technical Data Sheet

Fix-All® Product Selector

Safety Data Sheet

£5.75 ex. VAT | £6.90 inc. VAT

Soudal Fix All Turbo - 290ml Cartridge
Quick Look

Soudal Fix All Turbo

£5.75 ex. VAT | £6.90 inc. VAT

Soudal Fix All Turbo

Soudal Fix All Turbo

Soudal | SMX® Hybrid Polymer

Soudal Fix All Turbo is a super fast elastomeric adhesive.

Fix All Turbo has rapid strength build up after 20 minutes and final bond strength after 3 hours, high initial tack.

Fix All Turbo can be applied in all weather conditions (including wet and damp surfaces), internally and externally. No solvents or odours. Primerless adhesion on most construction materials.

Benefits

Soudal Fix All Turbo

  • Super fast

  • Rapid strength build up after 20 minutes

  • 3 hours final bond strength

  • Virtually Odourless

  • All Weather Use

  • Primerless adhesion

Application

Typical Applications:

  • For all elastomeric bonding applications where adhesive build up speed is highly critical or important.

  • Heavy duty bonding in all weather conditions, on most surfaces.

  • Bonding and sealing of porous natural stone surfaces such as marble and limestone.

Surface Preparation:

Porous surfaces in water loaded applications should be primed with Soudal Primer 150.

Smooth surfaces should be degreased before bonding them together. We recommend a preliminary adhesion test on every surface.

Fix-All® Turbo has been tested on the following metal surfaces: Steel, AlMgSi1, brass, electrolytic galvanised steel, AlCuMg1, flame galvanised steel, AlMg3 and steel ST1403.

Fix-All® Turbo also has a good adhesion on plastics: Polystyrene, polycarbonate (Makrolon®), PVC, ABS, polyamide, PMMA, fiberglass reinforced epoxy, polyester.

While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding.

NOTE: Bonding plastics like PMMA (e.g. Plexi® glass), polycarbonate (e.g. Makrolon® or Lexan®) in stress loaded applications can give rise to stress cracking and crazing in these substrates. The use of Fix All® Turbo is not recommended in these applications.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application: Apply the adhesive by means a caulking gun in uniform adhesive strips or dots (every 15 cm) on one of the substrates. Always apply an adhesive dot or strip on the corner and edges of panels. Bond the substrate and tamp with a rubber hammer. If necessary, support the bonded materials. The adhesive is hand tight after 20min and can be loaded after 3 hours.

  • Cleaning: With Sealant Remover immediately after use. Cured Fix-All® can only be removed mechanically.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning. 

  • Repair: With the same material

Remarks:

  • Fix-All® Turbo is paintable with most Water-based paints, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application.

  • The drying time of alkyd resin based paints may increase.

  • Fix-All® Turbo can not be used as a glazing sealant.

  • Not suitable for bonding aquariums.

  • Fix-All® Turbo can be used for bonding of natural stone, but it cannot be used as a joint sealant on this type of surface. Fix-All® Turbo can therefore only be used on the bottom of natural stone tiles.

  • When applying, make sure not to spill any sealant on the surface of materials.

Data Sheets

Technical Data Sheet

Fix-All® Product Selector

Declaration of Performance (DoP)

Safety Data Sheet

£5.75 ex. VAT | £6.90 inc. VAT

Soudal Fix All X-Treme Power - 290ml Cartridge
Quick Look

Soudal Fix All X-Treme Power

£4.95 ex. VAT | £5.94 inc. VAT

Soudal Fix All X-Treme Power

Soudal Fix All X-Treme Power

Soudal | SMX® Hybrid Polymer

Soudal Fix All X-Treme Power is an Extreme Tack, high strength elastomeric adhesive with enhanced mechanical properties.

With its ultimate initial grab, Fix All X-Treme Power can be applied in all weather conditions (including wet and damp surfaces), internally and externally. No solvents or odours. Soudal Fix All X-Treme Power offers primerless adhesion on most construction materials.

Benefits

Soudal Fix All X-Treme Power

  • Extreme Tack

  • Ultimate Initial Grab

  • Very High Final Mechanical Properties

  • Easily Gunnable

  • Primerless Adhesion

  • Virtually Odourless

  • All Weather Use

  • Isocyanate and silicone free.

Application

Typical Applications:

  • For all bonding applications where a high initial grab and final bond is extremely important.

  • Heavy Duty bonding in all weather conditions, on most surfaces.

  • Bonding and sealing of porous natural stone surfaces such as marble and limestone.

Surface Preparation:

Porous surfaces in water loaded applications should be primed with Soudal Primer 150.

Smooth surfaces should be degreased before bonding them together. We recommend a preliminary adhesion test on every surface.

Porous surfaces in water loaded applications should be primed with Soudal Primer 150. All smooth surfaces can be treated with Soudal Surface Activator.

Fix ALL X-Treme Power has excellent adhesion on most substrates. Fix-All® X-Treme Power is has been tested on following metal surfaces: stainless steel, AlMgSi1, brass, electro-galvanized steel, AlCuMg1, hot dip galvanized steel, AlMg3, steel ST1403.

Fix-All® X-Treme Power also has a good adhesion on plastics: polystyrene, PVC, polyamide, fiberglass reinforced epoxy, polyester. While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding. For optimum adhesion the use of Soudal Surface Activator is recommended.

NOTE: Bonding plastics like PMMA (e.g. Plexi® glass), polycarbonate (e.g. Makrolon® or Lexan®) in stress loaded applications can give rise to stress cracking and crazing in these substrates. The use of Fix-All® X-Treme Power is not recommended in these applications.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application: Apply the adhesive with a caulking gun onto one surface in beads or dabs (every 15cm). Always apply adhesive to the edges and corners of panels. Press the surfaces together and batten down with a rubber hammer. Support of the bonded materials may be required. The bond can be fully loaded after 24-48 hours.

  • Cleaning: With Sealant Remover immediately after use. Cured Fix-All® can only be removed mechanically.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning. 

  • Repair: With the same material

Remarks:

  • Fix All® X-Treme Power is paintable with most water-based paints, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application.

  • The drying time of alkyd resin based paints may increase.

  • Fix All® X-Treme Power can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we recommend preliminary compatibility test.

  • Fix All® X-Treme Power can not be used as a glazing sealant.

  • Not suitable for bonding aquariums.

  • Fix All® X-Treme Power can be used for bonding of natural stone, but it cannot be used as a joint sealant on this type of surface. Fix All® X-Treme Power can therefore only be used on the bottom of natural stone tiles.

  • When applying, make sure not to spill any sealant on the surface of materials.

Data Sheets

Technical Data Sheet

Fix-All® Product Selector

£4.95 ex. VAT | £5.94 inc. VAT

G B Pro Crystal Clear Hybrid Sealant & Adhesive - C3 Cartridge
Quick Look

G B Pro Hybrid Sealant & Adhesive

£2.95 ex. VAT | £3.54 inc. VAT

G B Pro Hybrid Sealant & Adhesive

G B Pro Hybrid Sealant & Adhesive

Bond-It | Adhesives & Wood Glues

Grab Adhesives

G B Pro is a one part, high quality, high modulus sealing and bonding material based on advanced hybrid polymer technology.

G B Pro is a totally neutral 'hybrid' sealant for use in areas requiring a tough elastic rubber joint or as an adhesive with superior bonding strength. 

G B Pro Conforms to ISO11600-F&G-20HM.

G B Pro is available in White or Crystal Clear colours.

Benefits
  • High modulus, remains permanently flexible.

  • For sealing and bonding interior and exterior applications in all weather conditions.

  • Can be over-painted.

  • Non shrinking.

  • Contains no isocyanates, solvents, silicone and phthalates.

  • Rapid curing.

  • Excellent adhesion to most surfaces (even moist surfaces).

  • Wet on wet application.

  • No odour.

Product Uses

G B Pro can be used for the following:

  • For filling and sealing of connecting joints, cracks, holes, etc in the building sector.

  • For bonding metal to metal (can absorb vibration).

  • As a universal waterproof construction adhesive for bonding concrete, mirrors (note: not suitable for plastic backed/safety mirrors), gypsum board, polycarbonates, polystyrene, PVC, many plastics, ceramics, copper, lead, zinc, aluminium, stainless steel, wood and glass.

We recommend that test areas be carried out prior to application to ensure compatibility of materials.

Application

Preparation:

Ensure all surfaces are clean and free from grease, oil or any other contaminants that may hinder adhesion.

Application Method:

Carefully cut the top of the cartridge taking care not to damage the threaded area.

Screw on the nozzle supplied and cut at an angle approximately 45°.

Apply using a standard sealant gun.

  • As an Adhesive: Apply in beads or strips and bond the surfaces together carefully and allow to cure.

  • As a Sealant: Apply in a continuous bead along the aperture and leave to fully cure. Smooth the joint by tooling with a soapy solution. Remove any excess material and clean tools immediately with white spirit. Replace plastic cap after use.

Limitations:

Please note this product is not recommended for use with expansion joints or for installations where the joints are continually immersed in water.

If allowed to cure in dark conditions or poor light the product may yellow.

This product is not suitable for use in aquariums.

Not suitable for use on LSE plastics such as PE, PP and PTFE.

This product may cause staining on marble and other stone surfaces.

This can be avoided by using a sealer prior to application of G B Pro.

Do not use for bedding in double glazed units, for this application we would recommend using Silirub® 2.

Do not use on surfaces that bleed oils or plasticisers.

Paintability: As quality and type of paint can vary, always test compatibility before use.

Any mirror made with 6mm glass or thicker needs mechanical fixing.

Any mirror on a sloping wall or ceiling must have mechanical fixings.

Any mirror greater than 1m² must have mechanical fixings.

Data Sheets

Technical Data Sheet

Safety Data Sheet (White)

Safety Data Sheet (Crystal Clear)

£2.95 ex. VAT | £3.54 inc. VAT

Soudaseal® Mirror - Hybrid Polymer Mirror Adhesive
Quick Look

Soudaseal® Mirror - Hybrid Polymer Mirror Adhesive

£5.49 ex. VAT | £6.59 inc. VAT

Soudaseal® Mirror - Hybrid Polymer Mirror Adhesive

Soudaseal® Mirror - Hybrid Polymer Mirror Adhesive

Soudal | Mirror Adhesive

Soudaseal® Mirror is a Hybrid Polymer based Mirror Adhesive and Sealant which has a high bond strength and fast cure on to nearly all surfaces, even when damp.

Soudaseal® Mirror has high performance mechanical properties and excellent extrudability, even at low temperatures.

Soudaseal® Mirror is free of isocyanates, silicone, solvents and acids meaning health and safety considerations are minimal.

Soudaseal® Mirror is resistant to many chemicals and withstands mould growth. There is also no staining of porous materials such as natural stone, blue stone, marble and granite when applying Soudaseal® Mirror.

Soudaseal® Mirror is compatible with all acetone resistant mirrors.

Benefits
  • Hybrid Polymer Sealant & Adhesive

  • Fast Curing

  • Primerless adhesion even on damp surfaces due to unique adhesion promoters.

  • Stays elastic after curing and very sustainable.

  • No odour and does not contain solvents.

  • Does not contain isocyanates and no silicones.

  • No risk for staining on porous substrates (migration of plasticizer).

  • Colourfast.

Application

Typical Applications:

  • Sealing and bonding of mirrors on to most types of surfaces.

  • Sealing of joints in mirror walls.

  • Bonding of mirrors even on damp surfaces.

  • Water resistant bonding.

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Porous surfaces in water loaded applications should be primed with Soudal Primer 150. All smooth surfaces can be treated with a Surface Activator.

Soudaseal® Mirror has excellent adhesion on most substrates. Soudaseal® Mirror can also be used on natural stone.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application Method: With a manual or pneumatic caulking gun. Apply Soudaseal® Mirror with attached V-cut nozzle in vertical adhesive beads on the back of the mirror. Depending on the weight of the mirror an adhesive bead shall be applied every 10 to 20cm.

  • Cleaning: Clean with a Sealant Remover.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

  • Repair: With the same material

Remarks:

  • Due to the wide variety of types of mirrors, we strongly recommend preliminary compatibility tests.

  • Due to the low initial tack, the mirrors need to be supported during the curing process until the adhesive has fully cured. The time required depends on the weight / size of the mirror, temperature, relative humidity and the amount of product used.

  • In order to avoid possible problems due to condensation, the mirror manufacturers as well as Soudal recommend sufficient ventilation at the back of the mirror. As a guideline, an opening of 3-4mm should be left between the surface and the mirror. This can be assured by the use of double sided mirror tape.

  • We recommend this minimal ventilation opening of 3-4mm to ensure correct curing of the adhesive / sealant. Full surface bonding is at own risk of the applicator.

  • For larger mirrors always use the adhesive in combination with a very good and qualitative double-sided adhesive mirror tape.

  • Mirrors that are fitted with a safety film at the back to avoid shattering must be pre-treated with an adhesion promoter. The use of Soudal Surface Activator will ensure the best bonding performance on this type of safety film. Without the use of Soudal Surface Activator the adhesive bond might be insufficient with the risk of an unsafe situation.

Data Sheets

Technical Data Sheet

Declaration of Performance (DoP)

Safety Data Sheet

£5.49 ex. VAT | £6.59 inc. VAT