Soudal | Hybrid Polymer Adhesive
Soudal Grip All Hybrid Polymer is a High Strength, Flexible Hybrid Polymer Grab Adhesive. The flexible properties improve the overall durability of the final bond.
Soudal Grip All Hybrid Polymer can be used both inside and outside, in all weather conditions and can also be applied on both damp and humid surfaces.
Supplied in 290ml Cartridges, available in White, Black and Grey.
Soudal Grip All Hybrid Polymer is a High Strength, Flexible Hybrid Polymer Grab Adhesive developed by Soudal using Flexible Bonding Technology.
The flexible properties of Soudal Grip All Hybrid Polymer improve the overall durability of the final bond.
Soudal Grip All Hybrid Polymer can be used both inside and outside, in all weather conditions.
Grip All Hybrid Polymer can also be applied on both damp and humid surfaces.
Hybrid Polymer Grab Adhesive
High Initial Grab
Stays Elastic After Curing and is Very Durable
Excellent Adhesion on nearly All Surfaces, even if Slightly Moist
Can be Painted with Water Based Systems
Good Weather and U V Resistance
Available in a Range of Colours
For Bonding Applications when a strong and flexible bond is essential.
Capable of Bonding all common building materials including Wood, Plywood, Plasterboard, Insulation Board, Breeze Block, Ceramics, Brick, Stone, Tile, Metal. Concrete, Plaster, PVCu and most Plastics.
NOT suitable for use on Natural Stone (use Fix All Flexi).
Grip All Hybrid Polymer has a good adhesion to most substrates. However, for optimal adhesion and in critical applications, such as joints exposed to extreme weather conditions, high- or water loaded joints, we recommend to follow a pre-treatment procedure.
Porous surfaces in water loaded applications should be primed with Soudal Primer 150. Prepare non-porous surfaces with Soudal Cleaner & Degreaser or Soudal Multi Cleaner Foam Spray.
Note: Bonding plastics like PMMA (e.g. Plexi® glass), polycarbonate (e.g. Makrolon® or Lexan®) in stress loaded applications can give rise to stress cracking and crazing in these substrates. The use of Grip All Hybrid Polymer is not recommended in these applications.
Not suitable for PE, PP, PTFE (eg Teflon®), bituminous substrates, copper or copper-containing materials such as bronze and brass. We recommend a preliminary adhesion and compatibility test on every surface.
Application: With a Caulking Gun.
Cleaning: With Sealant Remover immediately after use.
Finishing: Spray with a soapy solution before skinning.
Repair: With the same material
Minimum Width for Bonding: 2mm
Minimum Width for Joints: 5mm
Maximum Width for Bonding: 10mm
Maximum Width for Joints: 30mm
Minimum Depth for Joints: 5mm
Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth
Grip All Hybrid Polymer may be overpainted with water based paints, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application.
Grip All Hybrid Polymer can not be used as a glazing sealant. Use Silirub LMN or Silirub 2 instead.
A total absence of UV can cause a color change of the sealant.
When using different reactive joint sealants, the first joint sealant must be completely hardened before the next one is applied.
Grip All Hybrid Polymer has a good UV resistance but can discolour under extreme conditions or after very long UV exposure.
Discoloration due to chemicals, high temperatures, UV-radiation may occur. A change in color does not affect the technical properties of the product.
Contact with bitumen, tar or other plasticizer releasing materials such as EPDM, neoprene, butyl, etc. is to be avoided since it can give rise to discolouration and loss of adhesion.
Do not use in applications where continuous water immersion is possible.
Not suitable for bonding aquariums.
Do not use on natural stones like marble and granite as this may cause staining. Use Fix All Flexi or Silirub MA Instead..
We've added to your cart