Soudal Fix All High Tack 'Invisible'

Soudal Fix All High Tack 'Invisible'

Soudal | SMX® Hybrid Polymer

Fix All High Tack INVISIBLE is a Super Strong, Super Clear Adhesive with High Initial Tack.

Fix All High Tack Invisible can be applied in all weather conditions, internally and externally.

Fix All High Tack Invisible is virtually odourless with primerless adhesion on most construction materials, including wet and damp surfaces. Can be overpainted with most paints. Non-yellowing and UV Resistant. Very high mechanical properties.

Benefits

Soudal Fix All High Track 'Invisible'

  • High initial tack reducing the need for initial support.

  • Fast curing

  • Good extrudability

  • High shear strength after full cure

  • Stays elastic after curing and very sustainable

  • No odour.

  • Does not contain isocyanates and no silicones

  • Solvent free

  • Good adhesion on slightly moist substrates

Application

Typical Applications:

  • Transparent and elastic bonding in construction and building applications.

  • Elastic bonding of panels, profiles and other pieces on the most common substrates (wood, MDF, chipboard, etc).

Surface Preparation:

Porous surfaces in water loaded applications should be primed with Soudal Primer 150.

Smooth surfaces should be degreased before bonding them together. We recommend a preliminary adhesion test on every surface.

While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding.

NOTE: Bonding plastics like PMMA (e.g. Plexi® glass), polycarbonate (e.g. Makrolon® or Lexan®) in stress loaded applications can give rise to stress cracking and crazing in these substrates. The use of Fix All® High Tack is not recommended in these applications.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application: With manual or pneumatic Caulking Gun.

  • Cleaning: With Sealant Remover immediately after use. Cured Fix-All® can only be removed mechanically.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning. 

  • Repair: With the same material

Remarks:

  • Fix-All® High Tack Invisible may be overpainted with water based paints, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application.

  • The drying time of alkyd resin based paints may increase.

  • Fix-All® High Tack Invisible can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we recommend preliminary compatibilty test.

  • While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding. For optimum adhesion the use of Soudal Surface Activator is recommended.

  • Fix-All® High Tack Invisible cannot be used on natural stone as the adhesion surface will discolour under influence of the sealant (looks wet) and because this is visible through the crystal clear sealant it seems like staining has occurred.

  • Fix-All® High Tack Invisible can not be used as a glazing sealant.

  • Not suitable for bonding aquariums.

  • Fix-All® High Tack Invisible can discolour under extreme conditions or after very long UV exposure.

Data Sheets

Technical Data Sheet

Fix-All® Product Selector

Safety Data Sheet

More on this product...

£5.75 ex. VAT | £6.90 inc. VAT

  • Reviews

  • Customer Reviews

    Based on 1 review Write a review
  • Reviews

    Customer Reviews

    Based on 1 review Write a review