A range of Foam Applicators & Cleaning Products for use with our PU Foam Products including the Soudafoam and Soudabond Range.
These products include the 'Soudal Design PU Foam Gun', a Premium Quality Heavy Duty Professional Grade Metal Applicator Gun for use with Gun Foam Cannisters.
We also have a small range of products for the removal of cured and uncured PU Foam, as well as a selection of Hand Wipes & Cleaners.
Soudal | Expanding Foam
A Premium Quality Heavy Duty Professional Grade Metal Applicator Gun for use with Gun Foam Cannisters.
Bond-It | Expanding Foam Fillers
A High Quality Metal Gun Applicator Gun for use with Gun Foam Cannisters.
Spare Straw Replacement Nozzles for Hand Held Expanding Foam Canisters.
Supplied in packs of 5 Nozzles.
Soudafoam Gun & Foam Cleaner is an aerosol applied, solvent based Polyurethane Foam Cleaner used mainly for the cleaning of PU Foam Applicator Guns.
Gun applied PU Foam valves and uncured PU Foam can also be quickly and easily removed with the attachable spray nozzle.
Used in conjunction with Foam Applicators as cleaning fluid
Attachable spray nozzle allows for cleaning uncured spilt Polyurethane Foam.
Attach the Soudafoam red spray nozzle onto the valve and spray the cleaner towards the uncured foam. The foam will dissolve and can be wiped away using a cloth.
Please perform a compatibility test with all substrates as the cleaner is solvent based and may affect some materials adversely.
Remove the Soudafoam Expanding Foam cannister from the applicator by screwing anti-clockwise.
Use the cleaner as an aerosol spray to clean the exterior of the gun, the valve and the tip. Pull the trigger on the gun to de-pressurise the gun (please note, some foam may be extruded).
Spray the cleaner onto the adaptor ring to clean off the remainder of the uncured foam. Remove the red spray nozzle and screw the cleaner onto the gun turning clockwise until tight. Turn upside down and pull the trigger of the gun for a few seconds, let the cleaner activate inside the gun for a few minutes, then pull the trigger again for a few seconds.
Repeat the spraying and activating periods until only the clear solvent cleaner is visibly dispensed.
Take the usual labour hygiene into account.
Apply only in well ventilated areas. Always wear gloves and goggles during application. See our Safety & PPE Products.
Consult label and material safety data sheet for more information.
Soudal Cured PU Foam Remover is a Solvent Free, Gel Based Cleaner which is used for the easy removal of all remains of cured PU Foam.
Soudal Cured PU Remover easily removes all cured PU Foam residues on non porous surfaces such as plastics, metals, PVC etc.
1 x 100ml Soudal Cured PU Foam Remover Gel
1 x Spatula
1 x Brush
Free of (aromatic) hydrocarbons
Economic and easy to apply
Do not use on untreated copper, brass, zinc, acrylic paint or PMMA (Plexiglass).
Risk of staining on porous surfaces.
We recommend a preliminary compatibility test on an invisible part of the substrate.
Remove mechanically or cut away carefully as much cured foam as possible.
Apply Soudal PU Remover by means of the enclosed brush onto the cured PU foam.
Leave Soudal PU Remover for at least 30 minutes and maximum 2 hours.
Remove dissolved foam with the enclosed spatula and wipe off with a dry cloth. If necessary, repeat treatment by re-applying Soudal PU remover.
Always stick to recommended working time to avoid damage of the surface.
PU Remover may cause staining on porous surfaces (such as natural stone).
Soudal | Hand Wipes
Soudal SWIPEX Hand Wipes are Heavy Duty Non-Woven Cleaning Wipes impregnated with a liquid formula, biodegradable non-ionic surfactants and skin emollients.
Heavy Duty Cleaning Wipes
Removes many types of contaminants
Suitable for Hands and Tools
Kind to Skin
Soudal SWIPEX Hand Wipes are designed for the quick and effective removal of adhesives, sealants, oils, paints and greases from hands, tools and non-porous surfaces.
Take a wipe out of the packaging and re-seal immediately. Wipe hands until clean.
Or if cleaning a surface, wipe the stain until it has disappeared and use a dry cloth to polish the surface.
Soudal | Hand Cleaner
Soudal SWIPEX Hand Cleaner is a Heavy Duty Cleaner used to remove all kinds of dirt from your hands. The 'granular' texture in this product helps to scrub dirt away.
Soudal SWIPEX Hand Cleaner can be used to remove adhesives, silicone and PU Foam.
Soudal SWIPEX Hand Cleaner contains Sericin with moisturiser that helps protect the skin on your hands and keeps the skin soft.
Heavy Duty Hand Cleaner
Granular Texture to help remove dirt quickly
Contains Skin Caring Products (Sericin) which Moisturises Hands
Works on Adhesives, PU Foams, Silicones, Paints and Oils.
SWIPEX Hand Cleaner should only be used to clean your hands.
Put the needed quantity of product on the hands, rub till the complete emulsion of the dirt and rinse carefully.
Note: In order to best exploit the potential of the product it is recommended NOT to wet the hands neither before applying the hand cleaner nor during the rubbing.
Everbuild Building Products | Cleaning Products & Lubricants
Wonder Wipes are specially formulated for the building and allied trades to clean wet and semi-cured paints, sealants, adhesives, bitumen’s, polyurethanes, expanding foams, polyester fillers and epoxies from hands, tools and surfaces.
Wonder Wipes contain a powerful Anti-Bacterial Additive that is tested by an independent laboratory to BS EN 1276:2009 the standard for killing bacteria. Wonder wipes are active against most common bacteria found in the home and workplace.
Wonder Wipes also easily remove oil, grease petrol and inks, yet the powerful cleaning agents are still kind to hands.
Wonder Wipes are designed for the quick and effective removal of adhesives, sealants, oils, paints, greases etc... from hands, tools and non-porous surfaces.
Technical Data Sheet
Safety Data Sheet
We've added to your cart