ThermSolve is an independently tested, complex blended anti-condensation thermal performance coating paint which will drastically reduce condensation formation by utilising Glass Microsphere Technology.
As condensation is reduced, unsightly and potentially harmful black mould will not grow.
The Glass Microspheres effectively become 'charged' like a battery cell which enables them to retain heat for much longer compared to other decorative or specialist paints.
ThermSolve anti condensation paint maintains surface temperatures on walls and ceilings which reduces the formation of surface condensation.
Unlike other anti-mould or anti-condensation paints which contain biocides or simply only absorb moisture, ThermSolve can be overpainted and is an ideal solution for cold, exposed walls or areas where insulation may be missing or inadequate.
Available in 2.5 Litre or 5 Litre Buckets.
ThermSolve Preparation Treatment Spray is designed to remove surface grime and stains caused by condensation and black mould. It does not contain any harmful biocides and is based on natural ingredients. This product should be used to clean walls and ceilings before repainting with ThermSolve.
Available in 1 Litre Trigger Spray bottles.
Platinum Building Chemicals Ltd | Anti-Condensation Paint
ThermSolve is an independently tested, complex blended thermal performance coating system which will drastically reduce condensation formation by utilising Glass Microsphere Technology.
ThermSolve maintains surface temperatures on walls and ceilings which reduces the formation of surface condensation.
Reduced condensation and mould growth helping prevent the build-up of harmful spores which can cause respiratory, skin and immune problems.
Prevents formation of condensation.
Minimum preparation and disruption.
Perfect for use internally on those external cold exterior walls and areas of missing insulation.
Can be painted or wallpapered over unlike biocidal or absorbing anti-mould paints.
Surfaces should be clean, dry and free from grease and dirt. Remove all loose and defective paint. Lightly abrade glossy areas with abrasive paper.
Avoid inhalation of dust. Wear a suitable face mask when dry sanding.
Treat any visible mould with ThermSolve Preparation Treatment Spray.
Ensure the area is well ventilated.
Stir gently and thoroughly before use. DO NOT use a powered mixing paddle.
Application temperature between 5°C - 25°C.
Optimum dry film thickness is 200 microns.
The product should be touch dry after 2 hours depending on humidity and temperature.
Re-coat after 4 hours. Allow for extra drying time in cold and wet weather conditions.
For best results, use a medium pile roller. Can also be brush applied.
Over paint with a standard emulsion to achieve a smoother finish. You can also apply wallpaper over this coating.
Internal use only on walls and ceilings. Can be applied to block, brick, render and plaster
New plasterwork should be allowed to dry completely before applying ThermSolve.
Approximately 4-5m² per litre. 2 coats required.
Remove as much product as possible from equipment before cleaning with warm water.
ThermSolve Preparation Treatment spray is designed to remove surface grime and stains caused by condensation and black mould. It does not contain any harmful biocides and is based on natural ingredients.
This product should be used to clean walls and ceilings before repainting with ThermSolve Thermal Paint.
Supplied in 1 Litre Trigger Spray Bottles.
Gets to the Root of the Problem
Cleans off Mould and Grime
No Harmful Biocides
Apply to affected areas evenly and leave for 10-15 minutes before wiping down lightly to remove any remaining residue.
It is also advised to spray 300mm around the affected area to ensure the area is cleaned thoroughly.
We've added to your cart