Silicones & Sealant Products

The Soudal Professional Range is the most innovative and comprehensive branded range of Sealants, Adhesives, Fillers, PU Foams, Cleaners, Lubricants and Ancillary Products for the Construction and Industrial Markets. The SILIRUB® Brand The SILIRUB® Brand is a structured range of branded Silicone Sealants for Industrial, Construction and Sanitary applications. Fire Range The Fire Range includes products which conform to rigorous International... Read More

Silicones & Sealant Products

Soudaflex 40FC - Polyurethane Based Sealant & Adhesive - 310ml Cartridge
Quick Look

Soudaflex® 40FC - Polyurethane Sealant & Adhesive

£2.75 ex. VAT | £3.30 inc. VAT

Soudaflex® 40FC - Polyurethane Sealant & Adhesive

Soudaflex® 40FC - Polyurethane Sealant & Adhesive

Soudal | Polyurethane Sealant

Soudaflex® 40FC is a High Modulus Polyurethane Based Sealant & Adhesive which is very easy to apply and stays elastic after curing.

Soudaflex® 40FC has very good adhesion on many materials and has excellent resistance to many chemicals.

Soudaflex® 40FC was developed especially for concrete applications and is paintable with some types of paint after curing.

Benefits
  • Very easy to apply

  • Permanently elastic after curing

  • Excellent resistance to UV radiation

  • Very good adhesion on many materials

  • Excellent resistance to many chemicals

Application

Typical Applications:

  • Sealing and bonding in the manufacturing and construction industries.

  • Structural bonding on materials subject to vibration and movement.

  • Sealing applications including concrete and flooring joints.

  • Bonding of roof tiles.

Surface Preparation:

All surfaces should be clean, dry, free of dust and grease.

Apply Soudal Primer 100 on porous substrates. Always use Primer 100 on natural stone, no primer required on non-porous substrates. All smooth surfaces can be treated with Soudal Surface Activator.

There is no adhesion on glass, PE, PP, PTFE (Teflon®) and bituminous substrates.

We recommend a preliminary compatibility test.

Application Method:

  • Application Method: With manual or pneumatic caulking gun.

  • Cleaning: Clean with white spirit or Surface Cleaner immediately after use.

  • Finishing: With a soapy solution before skinning.

  • Repair: With the same material

Joint Dimensions:

  • Minimum Width for Bonding: 2 mm

  • Minimum Width for Joints: 5 mm

  • Maximum Width for Bonding: 10 mm

  • Maximum Width for Joints: 30 mm

  • Minimum Depth for Joints: 5 mm

  • Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth.

Remarks:

  • When painted with oxidative drying paints disturbances in the drying of the paint may occur (we recommend to do a compatibility test before application).
Data Sheets

Technical Data Sheet

Declaration of Performance (DoP)

Safety Data Sheet

£2.75 ex. VAT | £3.30 inc. VAT

Soudaseal® 215LM - Premium Hybrid Polymer Sealant
Quick Look

Soudaseal® 215LM - Premium Hybrid Polymer Sealant

£3.95 ex. VAT | £4.74 inc. VAT

Soudaseal® 215LM - Premium Hybrid Polymer Sealant

Soudaseal® 215LM - Premium Hybrid Polymer Sealant

Soudal | Hybrid Polymer Sealant

Soudaseal® 215LM is a Premium Quality, Low Modulus, 100% Hybrid Polymer Sealant.

Soudaseal® 215LM is odourless and has an extended open time compared to silicones to allow longer tooling of product.

Primerless adhesion on nearly all common construction materials such as plastics,
masonry, metals and wood - even when surfaces are damp.

Soudaseal® 215LM can be used on sensitive metals such as copper and lead. It is non-staining when applied on natural stone substrates, with no hydrophobic effect. No bubble formation within the sealant when applied on damp surfaces.

High performance mechanical properties. Colour stable, UV resistant and free of harmful chemicals (i.e isocyanates, solvents, halogens and acids).

Soudaseal® 215LM is paintable with all water-based paints and has excellent weathering resistance in all climates. Easy to apply, even at low temperatures.

Soudaseal® 215LM is airtight when used as part of Soudal Window System - SWS®.

Benefits
  • Tested and in accordance with ISO 11600 F-25LM.

  • Good adhesion to most common substrates, even on slightly wet substrates.

  • Easy to tool, extrude (even at low temperatures) and finish in all weather conditions.

  • Permanent elastic after curing.

  • No odour.

  • No bubble formation within sealant in high temperature and humidity applications.

  • Primerless application on many substrates (except where water pressure may occur).

  • No hydrophobic effect on natural stone.

  • Can be painted with water based systems.

  • Good colour stability, weather and UV resistance.

  • Free of isocyanates, solvents, halogens and acids.

  • Airtight when used as part of Soudal Window System - SWS®.

Application

Typical Applications:

  • Construction and industrial sealing applications.

  • Perimeter sealing of all window and door frame substrates - PVCu, aluminium and wood.

  • Sealing of roofline and drainage systems.

  • Sealing of expansion and connection joints in the building industry, including natural stone.

  • Roofing seals including lead, copper, roofing slates and fibre-cement.

  • Industrial applications; coated metals, anodized aluminium, stainless steel.

  • HVAC ducting, pipework and drainage joints. General maintenance and sealing.

Surface Preparation:

All smooth surfaces can be treated with Soudal Surface Activator. Porous surfaces in water loaded applications should be primed with Soudal Primer 150.

We recommend a preliminary adhesion test on every surface.

Application Method:

  • Application Method: With manual or pneumatic caulking gun.

  • Cleaning: Clean with white spirit or Surface Cleaner immediately after use.

  • Finishing: With a soapy solution before skinning.

  • Repair: With the same material

Joint Dimensions:

  • Minimum Width for Joints: 5 mm

  • Maximum Width for Joints: 30 mm

  • Minimum Depth for Joints: 5 mm

  • Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth.

Remarks:

  • Soudaseal® 215LM may be overpainted with water based paints, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application.

  • The drying time of alkyd resin based paints may increase.

  • Soudaseal® 215LM can not be used as a glazing sealant.

  • Soudaseal® 215LM is suitable for sealing on natural stone on condition the joint dimensions and joint movement are respected. Avoid permanent pressure on the sealant.

  • When applying, make sure not to spill any sealant on the surface of materials. Taping the surface around the joint can prevent this.

  • A total absence of UV can cause a color change of the sealant.

Data Sheets

Technical Data Sheet

Declaration of Performance (DoP)

Safety Data Sheet

£3.95 ex. VAT | £4.74 inc. VAT

Silirub® Pro N SWS - Airtight Premium Neutral Cure Silicone - 310ml Cartridge
Quick Look

Silirub® Pro N - Airtight LMN Silicone

£3.35 ex. VAT | £4.02 inc. VAT

Silirub® Pro N - Airtight LMN Silicone

Silirub® Pro N - Airtight LMN Silicone

Soudal | Silicone Sealant

Soudal Silirub® Pro N is an Airtight, Low Modulus Premium Grade Neutral Cure Silicone Sealant. It is virtually odourless with fast skinning time and final cure.

Soudal Silirub® Pro N is a 100% Pure Silicone Sealant with no shrinkage. Extra thick-bodied. Excellent toolability and Primerless Adhesion on common construction materials (i.e Glass, Plastics, Masonry Substrates, Metals and Wood).

Soudal Silirub® Pro N has high movement capability with resistance to weathering and many chemicals. High and low temperature resistance. It contains a strong Fungicide (XS1 Fungicide) to prevent unsightly Black Mould growth.

Soudal Silirub® Pro N Can be used with all types of Glass (Except Self-Cleaning types).

This product should not be confused with 'Silirub® N' which is a much lower grade of Neutral Cure Silicone Sealant.

This product is part of ‘Soudal Window Systems’ - SWS.

Benefits
  • 100% Pure Silicone Sealant

  • Long open time

  • Excellent moisture & mould resistance

  • Impervious to mould, contains ZnP (Biocide with Fungicidal Action)

  • Very easy to apply

  • Colourfast & UV Resistant

  • Permanent elastic after curing

  • Very good adhesion on many chemicals

  • Low modulus

  • Corrosion free

Application

Areas for Use:

  • Glazing, Construction and Industrial Applications.

  • Top Sealing in Glazing

  • Sealing of Window and Door Frames.

  • Sealing between PVC, Treated Wooden and Metal Profiles and Glass

  • Sealing joints in Sanitary Rooms (Bathrooms and Kitchens)

  • Sealing in Refrigerators and Container Constructions.

  • Sealing of Roofline and Drainage Systems.

  • Sealing of Aluminium Glazing Systems, Curtain Walling and Façade Panels.

  • Sealing of Expansion Joints.

  • Roofing Seals including Lead, Roofing Slates, and Fibre-cement.

  • Industrial Applications; Coated Metals, Anodized Aluminium, Stainless Steel.

  • Sealing in HVAC Ducting, Air Conditioning Systems, Pipework & Drainage Joints.

Compatibility with Glass:

Tests carried out in Soudal Laboratories show that Silirub® Pro N is compatible with most edge seals of insulating double glazing and conventional PVB films.

External testing at TÜV Rheinland have shown no visual defects or no other inconsistencies that were found between the secondary seal or PVB film and Silirub® Pro N after exposure to high temperature and humidity (Report No. 12490R-a-89202273).

Due to the large number of edge sealing systems on the market, it is impossible to test the compatibility of all combinations with glazing sealants.

We recommend a compatibility test for both double glass systems and laminated glass systems.

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Porous surfaces in water loaded applications should be primed with Soudal Primer 150. No primer needed for non-porous substrates.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application Method: With a manual or pneumatic caulking gun.

  • Cleaning: Clean with a Surface Cleaner immediately after use.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

  • Repair: With the same material

Joint Dimensions:

  • Minimum Width for Joints: 5 mm

  • Maximum Width for Joints: 30 mm

  • Minimum Depth for Joints: 5 mm

  • Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth.

Remarks:

  • Do not use on natural stones like marble, granite etc... as it may cause staining.

  • Not recommended for use on Polycarbonate (Use Silirub® AL2T)

  • A total absence of UV can cause a colour change of the sealant.

Data Sheets

Technical Data Sheet

 

Safety Data Sheet

£3.35 ex. VAT | £4.02 inc. VAT

Silirub® 2 - Premium LMN Silicone
Quick Look

Silirub® 2 - Premium LMN Silicone

£2.89 ex. VAT | £3.47 inc. VAT

Silirub® 2 - Premium LMN Silicone

Silirub® 2 - Premium LMN Silicone

Soudal | Silicone Sealant

Neutral Cure Silicone Sealant

Soudal Silirub® 2 is a Premium Low Modulus Neutral Cure Silicone Sealant. Virtually odourless, 100% Silicone with no extension.

Soudal Silirub® 2 has a very fast skinning time and final cure with very low dirt pick-up and no shrinkage during curing. Excellent break off and tooling.

Soudal Silirub® 2 has primerless adhesion on all common construction materials including glass, plastics, masonry substrates, metals and wood. High movement capability and is resistant to UV, rain, snow, ozone and many chemicals.

Soudal Silirub® 2 has been independently tested to ISO 11600 F&G 25 LM.

Supplied in 300ml Cartridges, available in White and Clear colours.

Benefits
  • 100% Pure Silicone.

  • Very easy to apply.

  • Colourfast and UV Resistant.

  • Permanent elastic after curing.

  • Very good adhesion on many materials.

  • Low Modulus.

  • Corrosion Free.

Application

Typical Applications:

  • Glazing, construction and industrial sealing applications.

  • Perimeter sealing of wood, PVCu and aluminium window and frames.

  • Weathersealing of aluminium glazing systems, curtain walling and facade panels.

  • Sealing of roofline and drainage systems.

  • Can be used in direct contact with all types of glass, except self cleaning types.

  • Bedding of double glazed sealed units in wet glazing applications.

  • Sealing of expansion and movement joints in construction.

  • Roofing seals including lead, roofing slates and fibre-cement.

  • Industrial sealing applications; coated metals, anodized aluminium, stainless steel.

  • HVAC Ducting, pipework and drainage joints.

  • General maintenance of sealing cars, caravans, mobile homes and boats.

Compatibility with Glass:

Tests carried out in laboratories show that Silirub® 2 is compatible with most edge seals of insulating double glazing and conventional PVB films.

External testing at TÜV Rheinland have shown no visual defects or no other inconsistencies that were found between the secondary seal or PVB film and Silirub® 2 after exposure to high temperature and humidity (Report No. 12490R-a-89202273).

Due to the large number of edge sealing systems on the market, it is impossible to test the compatibility of all combinations with glazing sealants.

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Porous surfaces in water loaded applications should be primed with Soudal Primer 150. No primer needed for non-porous substrates.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application Method: With a manual or pneumatic caulking gun.

  • Cleaning: Clean with a Surface Cleaner immediately after use.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

  • Repair: With the same material

Joint Dimensions:

  • Minimum Width for Joints: 5 mm

  • Maximum Width for Joints: 30 mm

  • Minimum Depth for Joints: 5 mm

  • Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth.

Remarks:

  • Do not use on natural stones like marble, granite etc... as it may cause staining.

  • Not recommended for use on Polycarbonate (Use Silirub® AL2T)

  • A total absence of UV can cause a colour change of the sealant.

Data Sheets

Technical Data Sheet

Declaration of Performance (DoP)

Safety Data Sheet

£2.89 ex. VAT | £3.47 inc. VAT

Silirub® LMN - Superior Multi-Use Neutral Cure Silicone - 300ml Cartridge
Quick Look

Silirub® LMN - High Quality LMN Silicone

£2.25 ex. VAT | £2.70 inc. VAT

Silirub® LMN - High Quality LMN Silicone

Silirub® LMN - High Quality LMN Silicone

Soudal | Silicone Sealant

Soudal Silirub® LMN is a High Quality Low Modulus Neutral Cure Silicone Sealant.

Soudal Silirub® LMN is virtually odourless, and has a very fast skinning time and final cure with very low dirt pick-up. Solvent-free silicone with no shrinkage during curing. Thick bodied, excellent break off and tooling.

Soudal Silirub® LMN has primerless adhesion on all common construction materials including glass, plastics, masonry substrates, metals and wood. It has a high movement capability and is resistant to UV, rain, snow, ozone and many chemicals.

Soudal Silirub® LMN has been independently tested to ISO 11600 F&G 25 LM.

Benefits
  • Very easy to apply

  • Colourfast and UV resistant

  • Permanent elastic after curing

  • Very good adhesion on many materials

  • Low Modulus

  • Neutral Cure

  • Corrosion Free

Application

Typical Applications:

  • Glazing, construction and industrial sealing applications.

  • Perimeter sealing of wood, PVCu and aluminium window and frames.

  • Weathersealing of aluminium glazing systems, curtain walling and facade panels.

  • Sealing of roofline and drainage systems.

  • Can be used in direct contact with most types of glass, (NOT suitable for self-cleaning types).

  • Bedding of double glazed sealed units in wet glazing applications.

  • Sealing of expansion and movement joints in construction.

  • Roofing seals including lead, roofing slates and fibre-cement.

  • Industrial sealing applications; coated metals, anodized aluminium, stainless steel.

  • HVAC Ducting, pipework and drainage joints.

  • General maintenance of sealing cars, caravans, mobile homes and boats.

Compatibility with Glass:

Soudal Silirub® LMN is not suitable for contact with secondary sealant of insulating glass units.

Soudal Silirub® LMN is not suitable for applications in direct contact with PVB films of laminated glass, for this we recommend to use Silirub® 2.

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Porous surfaces in water loaded applications should be primed with Soudal Primer 150. No primer needed for non-porous substrates.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application Method: With manual or pneumatic caulking gun.

  • Cleaning: Clean with a Surface Cleaner immediately after use.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

  • Repair: With the same material

Joint Dimensions:

  • Minimum Width for Joints: 5 mm

  • Maximum Width for Joints: 30 mm

  • Minimum Depth for Joints: 5 mm

  • Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth.

Remarks:

  • Do not use on natural stones like marble, granite etc... as it may cause staining.

  • Direct contact with the secondary sealing of insulating glass units (insulation) and the PVB-film of safety glass must be avoided.

  • A total absence of UV can cause a colour change of the sealant.

  • In an acid environment or in a dark room, white silicone can slightly turn yellow. However, under the influence of sunlight it will turn back to its initial colour.

  • We strongly recommend not to apply the product in full sunlight as it will dry very fast.

  • When finished with a finishing solution or soapy solution, make sure that the surfaces are not touched by this solution. This will cause the sealant not to adhere to that surface. Therefore we recommend to only dip the finishing tool in this solution.

  • Do not use in applications where continuous water immersion is possible.

Data Sheets

Technical Data Sheet

Declaration of Performance (DoP)

Safety Data Sheet

£2.25 ex. VAT | £2.70 inc. VAT

Silirub® A - General Purpose Acetoxy Cure Silicone - 290ml Cartridge
Quick Look

Silirub® A - General Purpose Silicone

£1.80 ex. VAT | £2.16 inc. VAT

Silirub® A - General Purpose Silicone

Silirub® A - General Purpose Silicone

Soudal | Silicone Sealant

Soudal Silirub® A is a General Purpose Low Modulus Acetoxy Cure Silicone Sealant.

Soudal Silirub® A is mould resistant and has primerless adhesion on glass, ceramic, porcelain, metals, stainless steel and wood.

Soudal Silirub® A is suitable for use in Sanitary Applications.

Benefits
  • Very easy to apply

  • Colourfast and UV resistant

  • Impervious to mould, contains DCOIT (biocide with fungicidal action)

  • Permanent elastic after curing

  • Very good adhesion on many materials

Application

Areas for Use:

  • Sanitary, Glazing, Construction and Industrial Applications.

  • Sealing in bathrooms and kitchens and other areas prone to high humidity.

  • Sealing of all types of sanitary ware including baths, basins, showers, toilets and glazed tile surrounds.

  • Perimeter sealing of wooden window & door frames.

  • Glass to glass sealing joints.

  • Top sealing of traditional glass and aluminium joints.

  • Industrial sealing applications; coated metals, anodized aluminium, stainless steel.

  • HVAC Ducting, pipework, and drainage joints.

  • General maintenance sealing of cars, caravans, mobile homes and boats.

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Porous surfaces in water loaded applications should be primed with Soudal Primer 150. No primer needed for non-porous substrates.

Not suitable for use on PVC.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application Method: With a manual or pneumatic caulking gun.

  • Cleaning: Clean with a Surface Cleaner immediately after use.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

  • Repair: With the same material

Joint Dimensions:

  • Minimum Width for Joints: 5 mm

  • Maximum Width for Joints: 30 mm

  • Minimum Depth for Joints: 5 mm

  • Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth.

Remarks:

  • Because of the acid nature, certain metals (eg copper, lead) can be affected.

  • Do not use on natural stones like marble, granite etc. as it may cause staining.

  • Direct contact with the secondary sealing of insulating glass units (insulation) and the PVB-film of safety glass must be avoided.

  • The sanitary formula should not replace regular cleaning of the joint. Excessive contamination, deposits or soap remainigs will stimulate the development of fungi.

  • A total absence of UV can cause a colour change of the sealant.

  • In an acid environment or in a dark room, white silicone can slightly turn yellow. Under the influence of sunlight it will turn back to its initial colour.

  • When finished with a finishing solution or soapy solution, make sure that the surfaces are not touched by this solution. This will cause the sealant not to adhere to that surface. Therefore we recommend to only dip the finishing tool in this solution.

  • We strongly recommend not to apply the product in full sunlight as it will dry very fast.

  • Do not use in applications where continuous water immersion is possible.

  • Do not use on polycarbonate. Use Silirub® AL2T instead.

Data Sheets

Technical Data Sheet

Declaration of Performance (DoP)

Safety Data Sheet

£1.80 ex. VAT | £2.16 inc. VAT

Soudal Stay Fresh - Ultimate Anti-Mould Sanitary Silicone
Quick Look

Soudal Stay Fresh - Ultimate Anti-Mould Sanitary Silicone

£4.50 ex. VAT | £5.40 inc. VAT

Soudal Stay Fresh - Ultimate Anti-Mould Sanitary Silicone

Soudal Stay Fresh - Ultimate Anti-Mould Sanitary Silicone

Soudal | Silicone Sealant

Soudal Stay Fresh is the ULTIMATE Anti-Mould and Food Safe Silicone Sealant.

Soudal Stay Fresh is a Thick-bodied, 100% Neutral Cure Silicone that contains powerful anti-fungicidal and anti-biocidal agents. It is virtually odourless and has a very fast skinning time and final cure.

Soudal Stay Fresh has primerless adhesion on all sanitary materials, including plastics.

Soudal Stay Fresh is highly elastic and is resistant to UV, rain, snow, ozone and many chemicals. High and low temperature resistant.

Benefits
  • Dual Action - Includes a powerful dual action fungicide and biocide, but is safe enough to use in food preparation areas.

  • Low Odour - Unlike traditional sealants it does not smell of vinegar, doesn’t contain or release acids and is compatible with all plumbing materials including copper piping.

  • Low Emissions - Stay Fresh is classified as a low emission product, rated A+ Indoor Emission Level and EC1plus under GEV-EMICODE.

  • Solvent Free - Contains no volatile solvents and does not shrink after use.

  • Lifetime Guarantee against Black Mould Growth

Application

Typical Applications:

  • For sealing shower bases and cubicles, sealing around baths, wet rooms, sinks, basins and any other sanitaryware.

  • For use in kitchens, utility rooms and all areas of high humidity.

  • Can be used to seal door and window frames internally in areas subject to high condensation.

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Porous surfaces in water loaded applications should be primed with Soudal Primer 150. No primer needed for non-porous substrates.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application Method: With a manual or pneumatic caulking gun.

  • Cleaning: Clean with a Surface Cleaner immediately after use.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

  • Repair: With the same material

Joint Dimensions:

  • Minimum Width for Joints: 5 mm

  • Maximum Width for Joints: 30 mm

  • Minimum Depth for Joints: 5 mm

  • Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth.

Remarks:

  • Do not use on natural stones like marble, granite etc. as it may cause staining.

  • Direct contact with the secondary sealing of insulating glass units (insulation) and the PVB-film of safety glass must be avoided.

  • Do not use on polycarbonate. Use Silirub® AL2T instead.

  • The sanitary formula should not replace regular cleaning of the joint. Excessive contamination, deposits or soap remainings will stimulate the development of fungi.

Data Sheets

Technical Data Sheet

Declaration of Performance (DoP)

Safety Data Sheet

£4.50 ex. VAT | £5.40 inc. VAT

Silirub® 2/S - Food Safe, Premium Quality LMN Sanitary Silicone - 300ml Cartridge
Quick Look

Silirub® 2/S - Premium LMN Sanitary Silicone

£3.35 ex. VAT | £4.02 inc. VAT

Silirub® 2/S - Premium LMN Sanitary Silicone

Silirub® 2/S - Premium LMN Sanitary Silicone

Soudal | Silicone Sealant

Soudal Silirub® 2/S is a Food Safe, Premium Quality Low Modulus 100% Pure Neutral Cure Sanitary Silicone Sealant. Ideal for use in Kitchens & Bathrooms.

Soudal Silirub® 2/S contains a powerful anti-fungicidal agent and is virtually odourless. Very fast skinning time and final cure. Thick-bodied. Primerless adhesion on all sanitary materials, including plastics.

Soudal Silirub® 2/S is highly elastic and resistant to UV, rain, snow, ozone and many chemicals.

Benefits & Features

Benefits:

  • 100% Pure Silicone

  • Food Safe

  • Long open time.

  • Excellent moisture and mould resistance.

  • Impervious to mould, contains ZnP (biocide with fungicidal action)

  • Very easy to apply

  • Colourfast and UV resistant

  • Permanent elastic after curing

  • Very good adhesion on many materials

  • Low Modulus

  • Corrosion free

Standards:

  • IBE-BVI Direct Food Contact Report CFP-13.009C

  • Report IANESCO 3812-food label for applications in food surroundings.

  • Report IANESCO 551, conformity to FDA CFR 21 §177.2600 (e)

Areas for Use

Soudal Silirub® 2/S is used for sealing Sanitary, Construction and Industrial applications where food contact is required.

Soudal Silirub® 2/S can also be used for the sealing of containers, cold-storage, air-conditioning, bathrooms, kitchens and other areas prone to high humidity.

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Porous surfaces in water loaded applications should be primed with Soudal Primer 150. No primer needed for non-porous substrates.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application Method: With a manual or pneumatic caulking gun.

  • Cleaning: Clean with a Surface Cleaner immediately after use.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

  • Repair: With the same material

Joint Dimensions:

  • Minimum Width for Joints: 5 mm

  • Maximum Width for Joints: 30 mm

  • Minimum Depth for Joints: 5 mm

  • Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth.

Remarks:

  • Do not use on natural stones like marble, granite etc. as it may cause staining.

  • Do not use on polycarbonate. Use Silirub® AL2T instead.

  • The sanitary formula should not replace regular cleaning of the joint. Excessive contamination, deposits or soap remainings will stimulate the development of fungi.

  • A total absence of UV can cause a colour change of the sealant.

  • In an acid environment or in a dark room, white silicone can slightly turn yellow. Under the influence of sunlight it will turn back to its initial colour.

  • We strongly recommend not to apply the product in full sunlight as it will dry very fast.

  • When finished with a finishing solution or soapy solution, make sure that the surfaces are not touched by this solution. This will cause the sealant not to adhere to that surface. Therefore we recommend to only dip the finishing tool in this solution.

  • Do not use in applications where continuous water immersion is possible.

Data Sheets

Technical Data Sheet

Declaration of Performance (DoP)

Safety Data Sheet

£3.35 ex. VAT | £4.02 inc. VAT

Silirub® 1 - Premium Universal Acetoxy Silicone - 300ml Cartridge
Quick Look

Silirub® 1 - Premium Sanitary Silicone

£2.45 ex. VAT | £2.94 inc. VAT

Silirub® 1 - Premium Sanitary Silicone

Silirub® 1 - Premium Sanitary Silicone

Soudal | Silicone Sealant

Soudal Silirub® 1 Universal is a Premium Low Modulus Acetoxy, 100% Pure Silicone for use in Sanitary Applications such as Kitchens & Bathrooms.

Soudal Silirub® 1 has very fast skinning and curing with very low dirt pick-up. Solvent Free, no shrinkage during curing.

Soudal Silirub® 1 contains a powerful anti-fungal agent to restrict the growth of mould. Thick bodied formulation for ease of use. Excellent break off and tooling.

Soudal Silirub® 1 has primerless adhesion on many common construction materials including glass, ceramic, porcelain, metals and wood. Resistant to UV, rain, snow, ozone and many chemicals. High movement capability. High and low temperature resistance.

Soudal Silirub® 1 has been independently tested to ISO 11600 F&G 25 LM.

Fungicide conforms to ISO 846 Standard.

Benefits
  • 100% Pure Silicone

  • Very easy to apply

  • Colourfast and UV resistant

  • Impervious to mould

  • Permanent elastic after curing

  • Very good adhesion on many materials

Application

Typical Applications:

  • Sanitary, Glazing, Construction and Industrial Applications.

  • Sealing in bathrooms and kitchens and other areas prone to high humidity.

  • Sealing of all types of sanitary ware including baths, basins, showers, toilets and glazed tile surrounds.

  • Perimeter sealing of wooden window & door frames.

  • Glass to glass sealing joints.

  • Top sealing of traditional glass and aluminium joints.

  • Industrial sealing applications; coated metals, anodized aluminium, stainless steel.

  • HVAC Ducting, pipework, and drainage joints.

  • General maintenance sealing of cars, caravans, mobile homes and boats.

 

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Porous surfaces in water loaded applications should be primed with Soudal Primer 150. No primer needed for non-porous substrates.

Not suitable for use on PVC.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application Method: With a manual or pneumatic caulking gun.

  • Cleaning: Clean with a Surface Cleaner immediately after use.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

  • Repair: With the same material

Joint Dimensions:

  • Minimum Width for Joints: 5 mm

  • Maximum Width for Joints: 30 mm

  • Minimum Depth for Joints: 5 mm

  • Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth.

Remarks:

  • Because of the acid nature, certain metals (eg copper, lead) can be affected.

  • Do not use on natural stone such as marble, granite etc. as it may cause staining.

  • Direct contact with the secondary sealing of insulating glass units (insulation) and the PVB-film of safety glass must be avoided.

  • The sanitary formula should not replace regular cleaning of the joint. Excessive contamination, deposits or soap remainings will stimulate the development of fungi.

  • A total absence of UV can cause a colour change of the sealant. In an acid environment or in a dark room, white silicone can slightly turn yellow. Under the influence of sunlight it will turn back to its initial colour.

  • When finished with a finishing solution or soapy solution, make sure that the surfaces are not touched by this solution. This will cause the sealant not to adhere to that surface. Therefore we recommend to only dip the finishing tool in this solution.

  • We strongly recommend not to apply the product in full sunlight as it will dry very fast.

  • Do not use in applications where continuous water immersion is possible.

  • Do not use on polycarbonate. Use Silirub® AL2T instead.

Data Sheets

Technical Data Sheet

Declaration of Performance (DoP)

Safety Data Sheet

£2.45 ex. VAT | £2.94 inc. VAT

Silirub® S - General Purpose Sanitary Grade Silicone - 310ml Cartridge
Quick Look

Silirub® S - High Quality Sanitary Silicone

£2.05 ex. VAT | £2.46 inc. VAT

Silirub® S - High Quality Sanitary Silicone

Silirub® S - High Quality Sanitary Silicone

Soudal | Silicone Sealant

Soudal Silirub® S is a High Quality Sanitary Grade Acetoxy Silicone sealant which contains a biocide (DCOIT) to help prevent mould growth in areas prone to high humidity such as kitchens and bathrooms.

Soudal Silirub® S has primerless adhesion on many common construction materials such as glass, ceramic, porcelain, metals and wood.

Soudal Silirub® S is resistant to weathering, chemicals and high and low temperatures.

Benefits
  • Very easy to apply

  • Colourfast and UV resistant

  • Impervious to mould

  • Permanent elastic after curing

  • Very good adhesion on many materials

Application

Areas for Use:

  • Sanitary, Construction or Industrial applications.

  • Sealing in areas prone to high humidity - kitchens and bathrooms.

  • Sealing of all traditional sanitary ware including baths, showers, toilets, basins and glazed tile surrounds.

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Porous surfaces in water loaded applications should be primed with Soudal Primer 150. No primer needed for non-porous substrates.

Not suitable for use on PVC.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application Method: With a manual or pneumatic caulking gun.

  • Cleaning: Clean with a Surface Cleaner immediately after use.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

  • Repair: With the same material

Joint Dimensions:

  • Minimum Width for Joints: 5 mm

  • Maximum Width for Joints: 30 mm

  • Minimum Depth for Joints: 5 mm

  • Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth.

Remarks:

  • Because of the acid nature, certain metals (eg copper, lead) can be affected.

  • Do not use on natural stones like marble, granite etc. as it may cause staining.

  • Direct contact with the secondary sealing of insulating glass units (insulation) and the PVB-film of safety glass must be avoided.

  • The sanitary formula should not replace regular cleaning of the joint. Excessive contamination, deposits or soap remainigs will stimulate the development of fungi.

  • A total absence of UV can cause a colour change of the sealant.

  • In an acid environment or in a dark room, white silicone can slightly turn yellow. Under the influence of sunlight it will turn back to its initial colour.

  • When finished with a finishing solution or soapy solution, make sure that the surfaces are not touched by this solution. This will cause the sealant not to adhere to that surface. Therefore we recommend to only dip the finishing tool in this solution.

  • We strongly recommend not to apply the product in full sunlight as it will dry very fast.

  • Do not use in applications where continuous water immersion is possible.

  • Do not use on polycarbonate. Use Silirub® AL2T instead.

Data Sheets

Technical Data Sheet

Declaration of Performance (DoP)

Safety Data Sheet

£2.05 ex. VAT | £2.46 inc. VAT

Silirub+® S1000 Premium Acetoxy Silicone Sealant - 310ml Cartridge
Quick Look

Silirub+® S1000 - Premium Sanitary Silicone

£2.45 ex. VAT | £2.94 inc. VAT

Silirub+® S1000 - Premium Sanitary Silicone

Silirub+® S1000 - Premium Sanitary Silicone

Soudal | Silicone Sealant

Soudal Silirub+® S1000 is a Premium Quality Acetoxy Sanitary Grade Silicone Sealant which contains powerful anti-fungal agents to restrict mould growth.

Soudal Silirub+® S1000 is thick-bodied formulation with excellent toolability. Primerless adhesion on many construction materials including glass, ceramics, porcelain, metals and wood.

Soudal Silirub+® S1000 is not suitable for use on PVC.

Soudal Silirub+® S1000 is resistant to weathering, chemicals and high and low temperatures. Gloss type finish on all colours.

Benefits
  • Primerless Adhesion on Most Traditional Construction Materials

  • Conforms to ISO 11600 F&G 25 LM

  • XS1 Fungicide (Strongest Fungicide)

Application

Typical Applications:

  • Sealing of Joints in Sanitary Applications such as Bathrooms and Kitchens

  • Top Sealing in Glazing.

  • Joints in Building Products from Aluminium and Finished Materials.

  • Sealing in Refrigerators and Container Construction.

  • Sealing in Air Conditioning Systems.

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Porous surfaces in water loaded applications should be primed with Soudal Primer 150. No primer needed for non-porous substrates.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application Method: With a manual or pneumatic caulking gun.

  • Cleaning: Clean with a Surface Cleaner immediately after use.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

  • Repair: With the same material

Joint Dimensions:

  • Minimum Width for Joints: 5 mm

  • Maximum Width for Joints: 30 mm

  • Minimum Depth for Joints: 5 mm

  • Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth.

Remarks:

  • Because of the acid nature, certain metals (eg copper, lead) can be affected.

  • Do not use on natural stone such as marble, granite, ... (staining). Use for this application Silirub®+ S8800.

  • Direct contact with the secondary sealing of insulating glass units (insulation) and the PVB-film of safety glass must be avoided.

  • The sanitary formula should not replace regular cleaning of the joint. Excessive contamination, deposits or soap remainings will stimulate the development of fungi.

  • A total absence of UV can cause a colour change of the sealant.

  • In an acid environment or in a dark room, white silicone can slightly turn yellow. Under the influence of sunlight it will turn back to its initial colour.

  • When finished with a finishing solution or soapy solution, make sure that the surfaces are not touched by this solution. This will cause the sealant not to adhere to that surface. Therefore we recommend to only dip the finishing tool in this solution.

  • We strongly recommend not to apply the product in full sunlight as it will dry very fast.

  • Do not use in applications where continuous water immersion is possible. Do not use on polycarbonate. Use Silirub® AL2T instead.

Data Sheets

Technical Data Sheet

Declaration of Performance (DoP)

£2.45 ex. VAT | £2.94 inc. VAT

Silirub+® S2000 Premium Neutral Construction Silicone Sealant - 380ml Cartridge
Quick Look

Silirub+® S2000 - Premium LMN Silicone

£2.65 ex. VAT | £3.18 inc. VAT

Silirub+® S2000 - Premium LMN Silicone

Silirub+® S2000 - Premium LMN Silicone

Soudal | Silicone Sealant

Soudal Silirub+® S2000 is a Premium Quality Neutral Cure Construction Silicone Sealant which is thick bodied and has excellent toolability.

Soudal Silirub+® S2000 has primerless adhesion on all common construction materials including glass, plastics, masonry substrates, metals and wood.

Soudal Silirub+® S2000 has high movement capability and is resistant to UV, rain, snow, ozone and many chemicals. High and low temperature resistance. Matt finish on all colours.

Benefits
  • Low Modulus Neutral Cure

  • Virtually Odourless

  • Primerless Adhesion on Most Surfaces

  • Conforms to ISO 11600 F&G 25LM

Application

Typical Applications:

  • Construction, Glazing and Industrial Sealing Applications.

  • Sealing of Expansion and Movement Joints, Curtain Walling and Facade Panels

  • Perimeter Sealing of Window & Door Frames.

  • Sealing of Roofline and Drainage Systems

  • Weathersealing of Aluminium Glazing Systems.

  • Can be used with most types of Glass (Except Self Cleaning Glass)

  • Roofing Seals including Lead, Roofing Slates and Fibre-Cement

  • Industrial Applications; Coated Metals, Anodized Aluminium, Stainless Steel.

  • HVAC Ducting, Pipework and Drainage Joints.

  • General Maintenance & Sealing

Compatibility with Glass:

Tests carried out in our laboratories show that Silirub+® S2000 is compatible with most edge seals of insulating double glazing and conventional PVB films.

External testing at TÜV Rheinland have shown no visual defects or no other inconsistencies that were found between the secondary seal or PVB film and Silirub+® S2000 after exposure to high temperature and humidity (Report No. 12490Ra-89202273).

Due to the large number of edge sealing systems on the market, it is impossible to test the compatibility of all combinations with glazing sealants.

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Porous surfaces in water loaded applications should be primed with Soudal Primer 150. No primer needed for non-porous substrates.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application Method: With a manual or pneumatic caulking gun.

  • Cleaning: Clean with a Surface Cleaner immediately after use.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

  • Repair: With the same material

Joint Dimensions:

  • Minimum Width for Joints: 5 mm

  • Maximum Width for Joints: 30 mm

  • Minimum Depth for Joints: 5 mm

  • Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth.

Remarks:

  • Do not use on natural stone such as marble, granite as it may cause staining. Use Silirub®+ S8800 for this application.

  • A total absence of UV can cause a colour change of the sealant.

  • In an acid environment or in a dark room, white silicone can slightly turn yellow. Under the influence of sunlight it will turn back to its initial colour.

  • When finished with a finishing solution or soapy solution, make sure that the surfaces are not touched by this solution. This will cause the sealant not to adhere to that surface. Therefore we recommend to only dip the finishing tool in this solution.

  • We strongly recommend not to apply the product in full sunlight as it will dry very fast.

  • Do not use in applications where continuous water immersion is possible.

  • Do not use on polycarbonate. Silirub® AL2T instead.

Data Sheets

Technical Data Sheet

Declaration of Performance (DoP)

£2.65 ex. VAT | £3.18 inc. VAT

Sold Out Sold Out