Soudal Firecement HT° is a High Temperature Resistant Fire Cement Sealant which can be used for the sealing of joints and openings at furnaces, heating systems, central heatings, barbecues, etc. Soudal Firecement HT° cures to form a hard setting seal and withstands temperatures of up to 1500°C.

Supplied in 310ml Cartridges, in Black colour only.

Description

Soudal Firecement HT° Sealant

Soudal Firecement HT° is a High Temperature Resistant Fire Cement Sealant which cures to form a hard setting seal and withstands temperatures of up to 1500°C.

Product Benefits:

• Heat resistant up to 1500°C

• Does not contain asbestos or other harmful components

• Hard setting

• Does not crumble or crack after cure

• Fire Rating of 120 minutes (Test Report 7830).

Typical Applications:

• Suitable for Internal Use

• Sealing of joints and openings at furnaces, heating systems, central heatings, barbecues, etc.

• Heat retardant sealing at existing constructions

Application

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

For use on brickwork, concrete and metals.

Slight moistening of the surface will increase adhesive strength

We recommend a preliminary adhesion test on every surface.

Application Method:

• Application Method: With a Caulking Gun, spatula or a trowel.

• Cleaning: Clean uncured product with a water immediately after use.

• Repair: With the same material

Joint Dimensions:

• Minimum Width for Joints: 5 mm

• Maximum Width for Joints: 15 mm

Remarks:

• A slight heating up of the installation during 12 hours after application of Firecement HT° will prevent the forming of bubbles and improve the sealant structure.

• Do not apply in situations where constant water immersion is possible

Test Results

Approvals:

• Test Report 7830 – University of Ghent to

• NBN 713.020

• BS 476:Part 20 – Warrington Fire Research Report C81770

Test Results:

TI = Thermal Insulation; the time during which the temperature on the unexposed side of the wall does not rise by more than 180°C

FR = Flame Resistance; the time during which the joints stops flames from penetrating the wall

Fire Rating: Draft European Commission Decision RG N170 REV.1

Data Sheets

Technical Data Sheet

Safety Data Sheet