Soudal Acryrub SWS is an Airtight, Premium Quality, Highly Elastic Acrylic Polymer Sealant and Filler which is solvent free, virtually odourless and very easy to apply. Soudal Acryrub SWS is part of the ‘Soudal Window Systems’ - SWS.

Supplied in 310ml Cartridges, available in White colour only.

  Read our Blog which highlight The Benefits of Using Soudal Window System - SWS® Products

Description

Soudal Acryrub SWS

Soudal Acryrub SWS is colourfast and waterproof after curing. It can also be painted over after cure. Very good adhesion on many porous surfaces. Very low emissions - EC-1R PLUS Label.

This product is part of ‘Soudal Window Systems’ - SWS.

Soudal Acryrub SWS conforms to ISO 11600 F 12.5 E.

  Read our Blog which highlight The Benefits of Using Soudal Window System - SWS® Products

Product Benefits:

• Permanent elastic after curing

• EC-1R PLUS Label: Very low emission

• Very easy to apply

• Colourfast and waterproof after curing

• Can be painted over after curing

• Very good adhesion on many porous substrates, hard PVC and aluminium

Typical Applications:

• Airtight joints between plastered walls and window frames.

• Interior joints around window frames with a maximum movement capacity of 25%.

• Connection joints in building industry.

• Joints on window sills, between plinths and walls, between masonry etc.

Applications

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Highly porous surfaces should be primed with a suitable primer.

Not suitable for use on natural stone, bitumen, glass and metal.

We recommend a preliminary adhesion test on every surface.

Application Method:

• Application Method: With manual  or pneumatic caulking gun. Finish with spatula or filling knife.

• Cleaning: Clean uncured product with a water immediately after use.

• Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

• Repair: With the same material

Coverage:

Coverage of any sealant product varies depending on Joint Width and Joint Depth.

Please refer to our Guide on How To Measure The Number of Tubes Required For the Job.

Joint Dimensions:

• Minimum Width for Joints: 5 mm

• Maximum Width for Joints: 20 mm

• Minimum Depth for Joints: 5 mm

• Recommendation Sealing Jobs: Joint Width = Joint Depth.

Remarks:

• Do not use in applications where continuous water immersion is possible.

• Paintable with most paints.

• The paint must be sufficiently elastic to allow application on a plasto-elastic sealant.

• Given the great diversity in available paints it is recommended to do a compatibility test prior to application

Data Sheets

Technical Data Sheet