Soudal | Acrylic Polymer Sealant
Soudal RepaCryl D is a Textured, Specialist Acrylic Polymer Based, Crack Repair Sealant & Filler for use in areas where a Granular type finish is required. RepaCryl D can be used as a sealing compound for cracks in concrete, pebble dash, plaster, stucco and other textured cementitious surfaces.
Supplied in 310ml Cartridges, White in colour.
Soudal RepaCryl D is a Textured, Specialist Acrylic Polymer Based, Crack Repair Sealant & Filler for use in areas where a Granular type finish is required.
Soudal RepaCryl D is solvent-free, virtually odourless and is very easy to apply. Colourfast and waterproof after curing.
Soudal RepaCryl D can be painted over after curing and has very good adhesion on most porous surfaces. Suitable for Interior and Exterior use.
Easy to wash into cracks
Immediately paintable with wall paint
Very good adhesion on many porous materials
Sealing compound for cracks in concrete, pebble dash, plaster, stucco and other textured cementitious surfaces.
Joints between window sills, skirting boards, floors and brickwork.
Surfaces should be clean, dry, free of dust and grease.
Open up cracks, remove loose parts, clean up joint sides and moisten slightly.
Highly porous surfaces should be primed with a suitable surface primer, or with diluted RepaCryl D (1 part RepaCryl D + 2 parts water).
Not suitable for use on natural stone, bitumen, glass and metal.
We recommend a preliminary adhesion test on every surface.
Application Method: In case of repairs of cracks in e.g. plaster apply the sealant by means of a caulking gun in the crack. Paint immediately with wall paint or finish with e.g. a wet sponge. In case of joints apply the sealant by means of a manual- or pneumatic caulking gun. Next finish with for example a filling-knife. Do not apply when rain or frost is imminent during curing process.
Cleaning: Clean uncured product with a water immediately after use.
Finishing: With a soapy solution or Soudal Finishing Solution before skinning.
Repair: With the same material
Static joints, gaps or seals up to maximum 2mm.
Do not use in applications where continuous water immersion is possible.
Paintable with most paints.
The paint must be sufficiently elastic to allow application on a plasto-elastic sealant.
Given the great diversity in available paints it is recommended to do a compatibility test prior to application.
We've added to your cart