Soudal Decorators Caulk is an acrylic polymer based sealant and filler which is solvent-free, virtually odourless and very easy to apply.

Soudal Decorators Caulk is colourfast and waterproof after curing.

Soudal Decorators Caulk has very good adhesion on many porous surfaces and can be painted over after curing. 

Benefits

• Easy to apply

• Colourfast and waterproof after curing

• Can be painted over after curing

• Good adhesion on many porous surfaces and aluminium

Applications

Typical Applications:

• Sealing of joints with movement of up to 10%.

• Sealing of window sills, skirting boards, architraves, plasterboard, brickwork etc.

• Filling of small cracks in plaster.

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

For use on most porous surfaces.

Highly porous surfaces should be primed with a suitable primer.

Not suitable for use on natural stone, bitumen, glass and metal.

We recommend a preliminary adhesion test on every surface.

Application Method:

• Application Method: With a manual or pneumatic caulking gun. Finish with spatula or filling knife.

• Cleaning: Clean uncured product with a water immediately after use.

• Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

• Repair: With the same material

Joint Dimensions:

• Minimum Width for Joints: 1 mm

• Maximum Width for Joints: 10 mm

• Minimum Depth for Joints: 5 mm

• Recommendation Sealing Jobs: Joint Width = Joint Depth.

Remarks:

• Do not use in applications where continuous water immersion is possible.

• Do not apply when rain or frost is imminent

• Decorators Caulk can be painted over with most paints.

• The paint should be sufficiently elastic to be applied on a plasto-elastic sealant. A preliminary test is recommended.

Data Sheets

Technical Data Sheet

Declaration of Performance

Safety Data Sheet

Soudal Acryrub® SWS is an Airtight, Premium Quality, Highly Elastic Acrylic Polymer Sealant and Filler which is solvent free, virtually odourless and very easy to apply.

Soudal Acryrub® SWS is colourfast and waterproof after curing. It can also be painted over after cure. Very good adhesion on many porous surfaces. Very low emissions - EC-1R PLUS Label.

This product is part of ‘Soudal Window Systems’ - SWS.

Soudal Acryrub® SWS conforms to ISO 11600 F 12.5 E.

Benefits

• Permanent elastic after curing

• EC-1R PLUS Label: Very low emission

• Very easy to apply

• Colourfast and waterproof after curing

• Can be painted over after curing

• Very good adhesion on many porous substrates, hard PVC and aluminium

Applications

Typical Applications:

• Airtight joints between plastered walls and window frames.

• Interior joints around window frames with a maximum movement capacity of 25%.

• Connection joints in building industry.

• Joints on window sills, between plinths and walls, between masonry etc.

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Highly porous surfaces should be primed with a suitable primer.

Not suitable for use on natural stone, bitumen, glass and metal.

We recommend a preliminary adhesion test on every surface.

Application Method:

• Application Method: With manual  or pneumatic caulking gun. Finish with spatula or filling knife.

• Cleaning: Clean uncured product with a water immediately after use.

• Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

• Repair: With the same material

Joint Dimensions:

• Minimum Width for Joints: 5 mm

• Maximum Width for Joints: 20 mm

• Minimum Depth for Joints: 5 mm

• Recommendation Sealing Jobs: Joint Width = Joint Depth.

Remarks:

• Do not use in applications where continuous water immersion is possible.

• Paintable with most paints.

• The paint must be sufficiently elastic to allow application on a plasto-elastic sealant.

• Given the great diversity in available paints it is recommended to do a compatibility test prior to application

Data Sheets

Technical Data Sheet

Soudal Acryrub® UK is a Premium Quality Decorators Caulk Sealant and Filler based on Acrylic dispersions.

Soudal Acryrub® UK is solvent-free, virtually odourless and very easy to apply. Colourfast and waterproof after curing. Can be painted over after curing. Very good adhesion on many porous surfaces.

Soudal Acryrub® UK conforms to ISO 11600 F 7.5 P

Benefits

• Acrylic Polymer Sealant and Filler

• Can be painted over after curing

• Virtually Odourless

• Conforms to ISO 11600 F 7.5 P

Applications

Typical Applications:

• Sealing of joints with dilatation of up to 7.5%.

• Sealing of window sills, skirting boards, architraves, plasterboard, brickwork etc.

• Filling of small cracks in plaster.

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Highly porous surfaces should be primed with a suitable primer.

Not suitable for use on natural stone, bitumen, glass and metal.

We recommend a preliminary adhesion test on every surface.

Application Method:

• Application Method: With manual  or pneumatic caulking gun. Finish with spatula or filling knife.

• Cleaning: Clean uncured product with a water immediately after use.

• Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

• Repair: With the same material

Joint Dimensions:

• Minimum Width for Joints: 5 mm

• Maximum Width for Joints: 20 mm

• Minimum Depth for Joints: 5 mm

• Recommendation Sealing Jobs: Joint Width = Joint Depth. Use a PE Backer Rod before applying sealant in large joints to avoid 3-point adhesion.

Remarks:

• Do not use in applications where continuous water immersion is possible.

• Paintable with most paints.

• The paint must be sufficiently elastic to allow application on a ‘plasto-elastic’ sealant.

• Given the great diversity in available paints it is recommended to do a compatibility test prior to application.

Data Sheets

Technical Data Sheet

Declaration of Performance (DoP)

Soudal Transpacryl is a transparent acrylic polymer based sealant and filler.

Soudal Transpacryl cures transparent, it is solvent-free, virtually odourless and very easy to apply.

Soudal Transpacryl is colourfast and waterproof after curing. It can also be painted over after curing.

Soudal Transpacryl has very good adhesion on many porous surfaces.

Benefits

• Transparent after curing

• Very good adhesion on many porous surfaces

• Good adhesion on anodized aluminium

• Can be painted over after curing

Application

Typical Applications:

• Sealing compound for cracks in concrete and plaster

• Joints with movements up to 15%.

• Connection joints in the building industry

• Joints between window sills, between skirting board and floor, between brickwork, etc.

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Transpacryl is suitable for use on all porous building surfaces, anodized aluminium and ceramic tiles.

Highly porous surfaces should be primed with a suitable primer or with diluted Transpacryl (1 part Transpacryl and 2 parts water).

We recommend a preliminary adhesion test on every surface.

Application Method:

• Application Method: With manual  or pneumatic caulking gun. Finish with spatula or filling knife.

• Cleaning: Clean uncured product with a water immediately after use.

• Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

• Repair: With the same material

Joint Dimensions:

• Minimum Width for Joints: 5 mm

• Maximum Width for Joints: 10 mm

• Minimum Depth for Joints: 5 mm

• Recommendation Sealing Jobs: Joint Width = Joint Depth. Use a PE Backer Rod before applying sealant in large joints to avoid 3-point adhesion.

Remarks:

• Do not use in applications where continuous water immersion is possible.

• Do not apply when rain or frost is imminent

• Transpacryl can be painted over with most paints.

• The paint should be sufficiently elastic to be applied on a plasto-elastic sealant. A preliminary test is recommended.

• Brief contact with water (i.e 24 hours) results in a slight clouding. After prolonged exposure to water (i.e 14 days) the product will turn white again and mechanical properties will reduce.

Data Sheets

Technical Data Sheet

Declaration of Performance (DoP)

Safety Data Sheet

Soudal Cement Repair Express is a High Speed, Acrylic Polymer Based, Textured Repair Cement which is used for quick and easy repairation of joints and cracks in concrete.

Soudal Cement Repair Express can be applied by trowel or gun and is sandable and overpaintable once dried.

Soudal Cement Repair Express is non-shrinking and can be used for both internal and external applications.

Benefits

Soudal Cement Repair Express

• Acrylic Polymer High Speed Repair Cement

• Very Fast Curing

• Excellent Adhesion on many Mineral Surfaces

• Non-Shrinking

• Textured Finish

• Paintable

Application

Typical Applications:

• Repairing holes and cracks in concrete and cement.

• Repairing joints in masonry.

• Repairing of damages in concrete stairs etc.

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Prepare very porous surfaces with diluted 'Cement Repair Express' (1 part Cement Repair Express and 2 parts water).

Suitable for use on all common porous surfaces in construction, and renovation.

NOT suitable for use on bitumen, glass, metal, PE, PP or PTFE.

We recommend a preliminary adhesion test on every surface.

Application Method:

Remove any loose parts before applying Cement Repair Express.

Apply the sealant by means of a handheld caulking gun or a spatula. Finishing with a wet filling knife or spatula gives the smoothest result.

For large(er) cracks, static joints or large screw holes apply the product preferably in two times.

Depending on the porosity of the substrate apply the second amount after approximately 30 minutes.

Depending on the amount of material applied the repair can be painted after a few hours

Uncured Cement Repair Express may be removed from skin and tools with water.

Cured filler must be removed mechanically.

Joint Dimensions:

• Static Joints: Up to 5mm.

Remarks:

• Do not use in applications where continuous water immersion is possible.

• Not suitable for movement or expansion joints

Data Sheets

Technical Data Sheet

Safety Data Sheet

**LIMITED STOCKS AVAILABLE**

Soudal Repa-Cryl D is a Textured, Specialist Acrylic Polymer Based Sealant & Filler for use in areas where a Granular type finish is required.

Soudal Repa-Cryl D is solvent-free, virtually odourless and is very easy to apply. Colourfast and waterproof after curing.

Soudal Repa-Cryl D can be painted over after curing and has very good adhesion on most porous surfaces. Suitable for Interior and Exterior use.

Benefits

• Granular structure

• Easy to wash into cracks

• Immediately paintable with wall paint

• Very good adhesion on many porous materials

Application

Typical Applications:

• Sealing compound cracks in concrete, pebble dash, plaster, stucco and other textured cementitious surfaces.

• Joints between window sills, skirting boards, floors and brickwork.

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Open up cracks, remove loose parts, clean up joint sides and moisten slightly.

Highly porous surfaces should be primed with a suitable surface primer, or with diluted Repacryl D (1 part Repacryl D + 2 parts water).

Not suitable for use on natural stone, bitumen, glass and metal.

We recommend a preliminary adhesion test on every surface.

Application Method:

• Application Method: In case of repairs of cracks in e.g. plaster apply the sealant by means of a caulking gun in the crack. Paint immediately with wall paint or finish with e.g. a wet sponge. In case of joints apply the sealant by means of a manual- or pneumatic caulking gun. Next finish with for example a filling-knife. Do not apply when rain or frost is imminent during curing process.

• Cleaning: Clean uncured product with a water immediately after use.

• Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

• Repair: With the same material

Joint Dimensions:

• Static joints, gaps or seals up to maximum 2mm.

Remarks:

• Do not use in applications where continuous water immersion is possible.

• Paintable with most paints.

• The paint must be sufficiently elastic to allow application on a plasto-elastic sealant.

• Given the great diversity in available paints it is recommended to do a compatibility test prior to application.

Data Sheets

Technical Data Sheet

Declaration of Performance (DoP)

Safety Data Sheet

Soudal Soudaduct® is an HVAC Acrylic Polymer Based Elasto-plastic Sealant.

Soudal Soudaduct® is a low odour and solvent-free sealant that has very good adhesion on galvanised and stainless steel. It remains permanently flexible and is paintable.

Benefits

• Very easy to apply.

• Low odour and solvent-free.

• Colourfast and waterproof after curing.

• Very good adhesion on galvanised and stainless steel.

• Remains permanently flexible.

• Conforms to Class C of DW144 and ISO11600 Class 12.5P.

Application

Typical Applications:

Soudal Soudaduct® is used for the sealing of all types of HVAC duct systems including sheet metal, duct boards and flexible ducts.

Soudaduct® can also be used for the sealing of seams, spigot joints, flange joints and metal fabrications.

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Highly porous surfaces should be primed with a suitable primer.

This product is suitable for use on all kind of ducting materials.

We recommend a preliminary adhesion test.

Application Method:

• Application Method: With a manual or pneumatic caulking gun. Finish with spatula or filling knife. Spread a minimum of 20 mm wet film thickness with a brush, or pump into well fitted joints. Seal all joints, seams, and penetrations in the duct-work to ensure an airtight system.

• Cleaning: Clean uncured product with a water immediately after use. Cured Soudaduct® should only be removed mechanically.

• Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

• Repair: With the same material

Joint Dimensions:

• Minimum Width for Joints: 5 mm

• Maximum Width for Joints: 20 mm

• Minimum Depth for Joints: 5 mm

• Recommendation Sealing Jobs: Joint Width = Joint Depth.

Remarks:

• Do not use in applications where continuous water immersion is possible.

• Do not apply when rain or frost is imminent

• Soudaduct® can be painted over with most paints.

• The paint should be sufficiently elastic to be applied on a plasto-elastic sealant. A preliminary test is recommended.

• Prior to pressure testing allow 12 - 24 hours drying time depending on temperature, humidity and application thickness

• Do not apply Soudaduct® outdoors.

Data Sheets

Technical Data Sheet

Declaration of Performance (DoP)

Safety Data Sheet