Soudal Fix ALL Turbo

Health & Safety Recommendations

Read the packaging label and Safety Data Sheet before use, and follow normal site hygiene throughout the job. Keep the working area well ventilated during application and curing, particularly in enclosed spaces or where multiple bonded items are being installed in a short period. Wear suitable gloves and eye protection, and avoid prolonged skin contact with uncured adhesive. If product comes into contact with skin, remove it promptly and wash with soap and water. If it gets into the eyes, rinse immediately with plenty of clean water and seek medical advice if irritation persists.

Because Soudal Fix ALL Turbo develops strength quickly, it is often used on live sites where components may be moved or handled soon after bonding. For that reason, plan the work carefully before application, keep the area tidy, and make sure panels, trims, or other bonded parts cannot fall or shift during the early curing period. Keep the cartridge away from children and food preparation areas, and do not eat, drink, or smoke during use.

Substrate Suitability

Soudal Fix ALL Turbo is designed for high speed bonding and sealing on a very wide range of construction materials. It adheres well to many usual building substrates, including lacquered wood, aluminium, steel, AlMgSi1, electrolytic galvanised steel, AlCuMg1, flame galvanised steel, AlMg3, steel ST1403, natural stone, many plastics, polystyrene, polycarbonate, PVC, ABS, polyamide, PMMA, fibreglass reinforced epoxy, polyester, and similar common building materials. This broad compatibility makes it particularly useful where mixed substrates are involved and fast strength build-up is essential.

It is not suitable for PE, PP, PTFE (Teflon®), bituminous substrates, copper, or copper containing materials such as bronze and brass. Although it can adhere to polycarbonate and PMMA in some situations, bonding these plastics in stress loaded applications can lead to crazing or stress cracking, so Fix ALL Turbo is not recommended in those cases. Because substrate formulations, coatings, and surface finishes vary, a preliminary adhesion and compatibility test should always be carried out before full application, especially on plastics, coated metals, or unfamiliar surfaces.

Surface Preparation

Good preparation is essential if Fix ALL Turbo is expected to deliver its fast early strength and high final bond performance. The surface must be rigid, clean, dry, and free from dust, grease, oils, loose coatings, release agents, and contamination. Although the product is often promoted for demanding bonding jobs, it should not be relied upon to overcome weak substrates or poor surface preparation. The better the surface condition, the more dependable the initial grab and long term bond.

Porous substrates should be primed with Soudal Primer 150 where needed, especially where the surface is dusty, highly absorbent, or critical to bond performance. Non-porous surfaces can be prepared with Soudal Cleaner & Degreaser, and for optimum adhesion the use of Soudal Surface Activator is recommended. Plastics often carry processing aids, release agents, or protective films from manufacture and transport, so these should be removed fully before bonding or sealing. Surfaces must then be allowed to dry properly before the adhesive is applied.

Application Method

Apply Soudal Fix ALL Turbo with a caulking gun. For bonding work, dispense the adhesive in uniform strips or dots on one of the substrates, spacing the dots or strips approximately every 15cm. Always apply an adhesive strip or dot at the edges and corners of the panel or component being bonded so that the perimeter is properly supported and the risk of edge lift is reduced. Do not apply the adhesive in a completely closed circumference, keep the bead interrupted so that moisture can assist curing and trapped air is avoided.

Once applied, bring the substrates together and bed them down firmly. Tamp into position with a rubber hammer if appropriate for the material and the installation method. If required, support the bonded materials while the adhesive develops strength. On absorbent and porous substrates with a thin adhesive layer, Fix ALL Turbo is already hand tight after approximately 20 minutes and can usually be loaded after approximately 3 hours. Thicker adhesive layers, colder site conditions, or non-absorbent substrates will extend curing time, so heavier items and less breathable assemblies should be left longer before loading or stressing.

Although Fix ALL Turbo is primarily used as a fast bonding adhesive, it can also be used for certain sealing and bonding details where quick strength build-up is required. If the visible edge needs finishing, tool before skin formation with a lightly soapy solution. Skin formation occurs at around 5 minutes under normal conditions, so work in short, manageable runs. Avoid smudging the visible face of the material with adhesive, particularly on decorative finishes, coated surfaces, and natural stone.

Joint Dimensions

Where Fix ALL Turbo is being used in a joint or sealing-type detail, the cured product can accommodate movement up to ±20%, but it is not intended as a glazing sealant or a dedicated sanitary joint sealant. Joint sizes should therefore be kept within sensible working limits and should match the application rather than being treated as a universal expansion joint product.

For bonding work, keep the adhesive layer reasonably controlled so that strength builds quickly and evenly. A thin, well-compressed adhesive layer is particularly important where the fast hand-tight performance is needed. For sealing type details, keep the joint geometry consistent and avoid very deep or oversized joints, especially where the product will be exposed to movement, cleaning, or repeated weathering.

Coverage

Coverage depends on bead size, bead spacing, substrate flatness, and whether the product is being used as a bond line or as a sealing detail. Uniform strips or dots placed at roughly 15cm centres will naturally cover more area than heavy continuous beads used on irregular surfaces. Rough or uneven backgrounds also increase consumption because more product is needed to achieve full contact.

If Soudal Fix ALL Turbo is being used as a sealant, refer to the Platinum Chemicals Online Estimate Calculator for a more accurate guide based on joint size and total run length. For bonding work, the most reliable approach is to estimate based on the intended strip pattern, substrate condition, and the size of the panel or object being fixed, then allow a sensible margin for site losses and irregular surfaces.

Curing Time

Soudal Fix ALL Turbo cures by moisture curing and forms a skin in approximately 5 minutes under normal conditions. It cures at around 2mm/24h to 3mm/24h, although real cure speed varies with temperature, humidity, substrate absorbency, bead thickness, and ventilation. Thin adhesive layers on porous substrates cure more efficiently and are one of the reasons the product can become hand tight in around 20 minutes in suitable conditions.

Final bond strength can be achieved very quickly in the right application, but this should not be taken as a universal rule for every substrate and every bead size. Thicker adhesive layers, dense non-porous materials, cooler conditions, and poor ventilation all increase cure time. Avoid loading or stressing bonded assemblies too early unless the actual site conditions match the fast-cure scenario described above. Once cured, the adhesive remains elastic and offers temperature resistance from -40°C to +90°C.

Cleaning

Clean uncured Soudal Fix ALL Turbo immediately using Soudal Swipex Wipes. This is particularly important on visible surfaces and around edges, because once the product starts to skin it becomes much harder to remove neatly without smearing. Keep tools clean during the work, and wipe away excess before it begins to cure.

Cured Fix ALL Turbo can only be removed mechanically, with the aid of Soudal Sealant Remover where appropriate. Mechanical removal should be carried out carefully on decorative finishes, coated metals, plastics, and natural stone, as damage to the substrate is often more likely than damage to the cured adhesive itself. Where appearance matters, always clean as you go rather than leaving excess for later removal.

Limitations

Soudal Fix ALL Turbo is not suitable for PE, PP, PTFE (Teflon®), bituminous substrates, copper, or copper containing materials such as bronze and brass. It cannot be used as a glazing sealant, use Silirub 2 or Silirub LMN, or if the application is in a high humidity area use Soudal Stay Fresh NEUTRAL. It is not suitable for bonding aquariums, use Silirub AQ. It must not be used in applications where continuous water immersion is possible, and it is not suitable for sanitary applications despite its mould resistance features.

Fix ALL Turbo can be used for bonding natural stone, but it cannot be used as a joint sealant on this type of surface, use an appropriate non-staining natural stone joint sealant. It should not be used on self cleaning glass, use Soudal SMX 506. Contact with bitumen, tar, or plasticiser releasing materials such as EPDM, neoprene, and butyl should be avoided, as this can lead to discolouration and loss of adhesion, for EPDM use Silirub EPDM. It also has good UV resistance, but discolouration can still occur under extreme conditions, prolonged UV exposure, high temperatures, or aggressive chemical exposure.

Other Information

Fix ALL Turbo may be overpainted, but because paints and varnishes vary so widely, a compatibility test should always be carried out first. Water based systems are generally the preferred option. Alkyd resin based paints may show slower drying times over the adhesive, so allow extra time if these coatings are being used. This is especially important where finishing schedules are tight and the bond line will remain visible.

When using different reactive joint sealants on the same project, allow the first sealant to cure fully before applying the next one nearby or over adjacent areas. This helps avoid curing interference and compatibility problems. Although Fix ALL Turbo offers very fast strength build-up, the best results still depend on clean surfaces, good bead control, correct substrate preparation, and realistic curing time for the actual site conditions.

Q) What is Soudal Fix ALL Turbo?

A) Soudal Fix ALL Turbo is a fast-curing, neutral cure adhesive sealant based on advanced SMX Polymer technology. It is designed for jobs where rapid strength build-up matters just as much as final bond strength. Unlike a standard grab adhesive that may still need prolonged support, Fix ALL Turbo can achieve a hand-tight bond in around 20 minutes under suitable conditions and reach final bond strength in approximately 3 hours. Once cured, it remains permanently elastic rather than going brittle, which helps it cope with minor movement and vibration. It is suitable for interior and exterior use, bonds to most common building materials, and can also be painted with many water based systems once cured.

Q) What makes Soudal Fix ALL Turbo different from other adhesive sealants?

A) The main difference with Soudal Fix ALL Turbo is speed. Many adhesive sealants offer strong final performance, but they still require extended waiting time before the bonded item can be handled or the next stage of work can continue. Fix ALL Turbo is designed specifically to reduce that delay. It gives around 5 minutes of adjustment time, becomes hand-tight in about 20 minutes in favourable conditions, and can reach full bond strength in roughly 3 hours. That makes it highly useful for time-sensitive installation work. At the same time, it still remains permanently elastic after curing, so you get both quick progress on site and the long-term flexibility needed in real building conditions.

Q) What is Soudal Fix ALL Turbo used for most often?

A) Soudal Fix ALL Turbo is commonly used for fast-track bonding of trims, profiles, panels, metal components, natural stone details and general building accessories where quick handling strength is important. It is also useful for refurbishment work, maintenance repairs and mixed-material fixing where a strong bond is needed without waiting all day for full strength to develop. Because it remains flexible after curing, it also suits applications where minor vibration, thermal movement or service movement could affect a rigid adhesive. Many users choose it when they need one product that can both bond and seal, especially on site jobs where faster progression, cleaner installation and reduced need for temporary support can save time and improve overall efficiency.

Q) Can Soudal Fix ALL Turbo be used indoors and outdoors?

A) Yes, Soudal Fix ALL Turbo is suitable for both internal and external use on compatible substrates. Indoors, it is useful for rapid bonding and finishing work where low odour handling and quick strength build-up help keep the job moving. Outdoors, it offers good UV resistance and weather resistance once cured, so it is suitable for many exposed bonding and sealing tasks. It is particularly practical on real building sites because it can be used even when conditions are not perfectly dry. That said, good workmanship still matters. Surfaces should be sound and properly prepared, and freshly applied product should not be disturbed during the early curing phase if you want the final bond to perform as intended.

Q) Which materials will Soudal Fix ALL Turbo bond to?

A) Soudal Fix ALL Turbo bonds to a very wide range of usual construction materials, which is one of its major strengths. Suitable materials include many common building substrates, lacquered wood, aluminium, steel, galvanised steel, natural stone, PVC, ABS, polyamide, PMMA, polycarbonate, fibreglass reinforced epoxy, polyester and similar materials used in construction, fit-out and maintenance. This broad compatibility makes it useful where mixed substrates are involved and fast strength build-up is needed. Even so, you should always be sensible with unfamiliar finishes. Coatings, plastics and manufactured surfaces vary between suppliers, so a small adhesion and compatibility test is always advisable before full application, especially when the bond is critical or the substrate is expensive.

Q) Can Soudal Fix ALL Turbo be applied to slightly damp surfaces?

A) Yes, Soudal Fix ALL Turbo performs well on many slightly moist or humid surfaces, which makes it very useful on refurbishment jobs, external work and live sites where ideal drying conditions are not always realistic. That said, slightly damp does not mean wet or contaminated. Standing water, visible moisture film, grease, loose dust or unstable residues should always be removed before application. The substrate still needs to be sound and capable of supporting the bond. On non-porous surfaces, Soudal Cleaner & Degreaser helps ensure proper wetting of the substrate. On porous surfaces, especially where optimum consistency is needed, Soudal Primer 150 may be beneficial. Proper preparation still has a major effect on how quickly and how reliably the bond develops.

Q) Is Soudal Fix ALL Turbo suitable for natural stone?

A) Yes, Soudal Fix ALL Turbo is suitable for bonding porous natural stone and is designed to be non-staining, which makes it a strong option for fixing visible stone elements such as marble and limestone. This is particularly useful where appearance matters and where some adhesives could mark or discolour the stone. However, there is an important distinction between bonding and sealing. Fix ALL Turbo is suitable for bonding natural stone, but it should not be used as a joint sealant on natural stone. For sealing stone joints, a more suitable product should be selected depending on the application. As with any stone job, always test first because porosity, finish and surface treatment can vary and affect the final appearance.

Q) Is Soudal Fix ALL Turbo flexible after curing, or does it go hard?

A) Soudal Fix ALL Turbo remains permanently elastic after curing, which is a key reason it performs better than rigid adhesives in many real-world applications. A hard, brittle adhesive may hold initially, but it can crack or lose adhesion when the bonded materials expand, contract or vibrate in service. Fix ALL Turbo is designed to avoid that problem. Even though it develops strength quickly and cures to a firm, durable body, it still retains enough flexibility to cope with minor building movement, thermal expansion and vibration. That makes it suitable for a wide range of construction and maintenance applications where the bond needs both strength and resilience. This balance of firmness and elasticity is one of its strongest practical advantages.

Q) How quickly does Soudal Fix ALL Turbo grip and build strength?

A) Soudal Fix ALL Turbo is designed for very fast strength build-up. Under suitable conditions, it can achieve a hand-tight bond in around 20 minutes, which means the bonded item becomes stable far sooner than with many standard adhesive sealants. This is especially useful when fitting trims, profiles, metal parts or stone details where waiting time would otherwise slow the job down. The product then continues curing rapidly and can achieve final bond strength in approximately 3 hours, depending on the substrate, bead thickness, temperature and ventilation. That combination of quick early stability and fast final performance is what makes Fix ALL Turbo particularly attractive for trade users working to tight schedules or repeated installation work.

Q) How much working or adjustment time do I get with Soudal Fix ALL Turbo?

A) Soudal Fix ALL Turbo gives a short but practical adjustment window of around 5 minutes after application. That is enough time to position, level and seat the bonded parts properly before the product starts to lock them into place. This balance is one of its biggest advantages. Some fast products cure so quickly that they are difficult to use accurately, while slower products leave the installer waiting too long for strength to develop. Fix ALL Turbo sits between the two extremes by giving enough time for careful placement while still building strength quickly afterwards. Because the working time is short, it is best to prepare the job fully beforehand so that parts can be offered up and aligned without delay.

Q) How should I prepare the surface before using Soudal Fix ALL Turbo?

A) Surface preparation is critical if you want Soudal Fix ALL Turbo to deliver its advertised speed and strength. The surface should be rigid, sound, dry or only slightly moist, and free from dust, grease, oil, loose coatings, release agents and other contamination. Poor preparation reduces both the initial grip and the long-term bond. Non-porous surfaces should be cleaned with Soudal Cleaner & Degreaser, and for optimum adhesion Soudal Surface Activator is recommended on more difficult smooth materials. On porous substrates, especially where the surface is dusty or absorbent, Soudal Primer 150 can help stabilise the background and improve reliability. Plastics should also be checked carefully for protective films or manufacturing residues before bonding begins.

Q) How do I apply Soudal Fix ALL Turbo correctly?

A) Apply Soudal Fix ALL Turbo with a standard caulking gun. For bonding, run uniform strips or dots on one substrate, spacing them roughly every 15cm. Always include adhesive at the edges and corners so the perimeter is properly supported and less likely to lift later. Do not run the adhesive in a fully closed perimeter, as leaving the pattern open helps moisture assist the cure. Once applied, bring the substrates together and press firmly. If suitable for the material, a rubber hammer can help bed the parts down evenly. For any visible edge finishing, tool before skin formation starts, which is around 5 minutes. Keep the application controlled and avoid smearing decorative surfaces, as rapid skinning makes later cleanup more difficult.

Q) Does Soudal Fix ALL Turbo need temporary support after bonding?

A) In many cases Soudal Fix ALL Turbo greatly reduces the need for temporary support because it develops usable strength very quickly. On absorbent and porous substrates with a thin adhesive layer, it can become hand-tight in around 20 minutes, which is a major advantage over slower products. However, that does not mean support is never needed. Larger, heavier or awkwardly shaped items may still need temporary support while the bond develops, especially if the assembly is vertical, overhead, under tension or fitted to less absorbent materials. Good judgement is still important. If movement could affect alignment, support the part until enough strength has developed. Fix ALL Turbo improves speed dramatically, but safe installation practice should still come first.

Q) Can Soudal Fix ALL Turbo be used as both an adhesive and a sealant?

A) Yes, Soudal Fix ALL Turbo can be used for both bonding and certain sealing-type applications, which makes it a flexible product for practical site work. As an adhesive, it is particularly valuable where quick strength build-up is essential. As a sealant, it can provide a durable, elastic closure on suitable details where fast cure and flexibility are both beneficial. That said, it should not be treated as a specialist sealant for every purpose. It is not a glazing sealant, not intended for sanitary use, and not suitable for continuous water immersion. Its strongest role is as a fast, heavy-duty adhesive sealant for mixed construction tasks where the installer wants both quick early handling strength and a permanently elastic final bond.

Q) How much Soudal Fix ALL Turbo will I need for a job?

A) Coverage depends on how the product is being used. Uniform strips or dots for bonding will cover more area than heavy continuous beads used on uneven surfaces or sealing details. Rough backgrounds also increase consumption because more material is needed to achieve proper contact. For bonding, the best approach is to estimate from the size of the panel or item being fixed and the strip pattern you intend to use, then allow a sensible margin for irregularities and wastage. If you are using Soudal Fix ALL Turbo as a sealant on a defined joint, the Platinum Chemicals Online Estimate Calculator is the most practical way to work out likely usage based on the width, depth and total run length of the joint.

Q) How long does Soudal Fix ALL Turbo take to cure fully?

A) Soudal Fix ALL Turbo has two important time stages. It can become hand-tight in around 20 minutes in favourable conditions, which gives early stability for many bonding jobs. Full bond strength can then be reached in approximately 3 hours, but this depends on the actual site conditions and the application. Curing also progresses through the bead at roughly 2mm to 3mm per 24 hours, so thicker beads or less absorbent substrates will take longer to cure through fully. Temperature, humidity, airflow and substrate porosity all influence performance. On site, that means you should judge curing according to the real conditions, not just the headline numbers. Thin beads on porous materials cure much faster than thick beads on dense surfaces.

Q) Can Soudal Fix ALL Turbo be painted after it cures?

A) Yes, Soudal Fix ALL Turbo can be overpainted with many water based paint systems once it has cured. This is helpful where the bonded line or visible edge needs to blend neatly into surrounding trim, joinery or wall finishes. Painting should not be rushed, because uncured or partly cured adhesive can affect drying and finish quality. Water based paints are generally the preferred choice. Alkyd resin based paints may dry more slowly over the cured product, so those should always be tested first. As with any adhesive sealant, paint compatibility varies widely between brands and formulations, so a trial area is strongly recommended before committing to a full decorative finish, especially where appearance matters.

Q) How do I clean Soudal Fix ALL Turbo from tools and surfaces?

A) Fresh Soudal Fix ALL Turbo should be cleaned off immediately using Soudal Swipex Wipes. That is the easiest stage for removal, especially on tools, non-porous surfaces and visible finished materials. Because the product skins quickly, any delay makes cleanup harder and increases the chance of smearing. During work, it helps to keep wipes close at hand so you can deal with excess straight away. Once the product has cured, it can only be removed mechanically, although Soudal Sealant Remover can assist where appropriate. On decorative or coated surfaces, always work carefully and test any remover first in a hidden area, because aggressive cleaning may damage the finish more easily than the cured adhesive itself.

Q) What surfaces or situations should Soudal Fix ALL Turbo not be used on?

A) Soudal Fix ALL Turbo is not suitable for polyethylene, polypropylene, PTFE, bituminous substrates, copper, bronze or brass. It must not be used as a glazing sealant, for aquarium bonding, for sanitary applications, or where continuous water immersion is expected. It should also be avoided on self-cleaning glass. Contact with bitumen, tar and plasticiser-releasing materials such as EPDM, neoprene and butyl can lead to discolouration and loss of adhesion, so those interfaces need different specialist products. Although it can bond many plastics, stress-loaded applications on sensitive plastics such as PMMA and polycarbonate can lead to crazing or cracking. In short, it is very versatile, but correct product selection still matters if long-term reliability is the goal.

Q) What are the best tips for getting the best results with Soudal Fix ALL Turbo?

A) The best results with Soudal Fix ALL Turbo come from planning the job properly before application. Prepare and dry-fit the parts first, because the working time is only around 5 minutes. Clean the surfaces carefully using Soudal Cleaner & Degreaser, use Soudal Primer 150 on porous surfaces where needed, and use Soudal Surface Activator on difficult smooth materials where recommended. Apply controlled strips or dots rather than random heavy blobs, and always support the edges and corners of panels. Press the parts together firmly, because contact pressure has a major effect on final bond quality. Clean excess straight away with Soudal Swipex Wipes, and do not rush loading simply because early grab is strong. Let the actual conditions guide your timing.

Technical Data Sheet

Fix-All Product Selector

Declaration of Performance (DoP)

Safety Data Sheet