Soudal | Expanding Foam
Soudafoam Window & Door SWS is a Flexible, Airtight Expanding Foam Filler manufactured to the highest quality. Part of the 'Soudal Window System', Soudafoam Window & Door SWS is recommended for all A, A+ and A++ Rated windows and doors.
Soudafoam Window & Door SWS is highly flexible once cured, based on FLEXIFOAM® Technology, which gives improved durability.
Soudafoam Gun Grade cans are fitted with DuraValve™, a unique valve system that improves the yield and performance of Soudafoam products over much longer time periods than standard valves.
Supplied in 750ml Cans, available Gun Grade application only.
Soudafoam Window & Door SWS is a Premium Quality, Airtight, Acoustic and Thermal Insulation Foam Filler for use around Windows and Doors.
Soudafoam Window & Door SWS is recommended for all A, A+ and A++ Rated windows and doors. Vastly improved thermal and insulation properties and totally airtight after curing.
The elastic properties in this product allow the foam to follow the movement of the joint and keep its insulation properties for many years.This product can be used at temperatures between -10°C to +30°C.
Soudafoam Window & Door SWS is a one-component Polyurethane Foam with rapid curing and primerless adhesion on most construction.
Soudafoam Window & Door SWS is a product which is part of the Soudal Window System (SWS).
The professional window-joint system SWS is a combination of several products which provide the seal between exterior joinery and the structural envelope.
In new buildings, this is a joint of ±2cm, but SWS can, of course, also be used for renovation of all sorts of exterior joinery: aluminium, wood and PVC. SWS also offers solutions for passive houses and timber framed houses.
SWS has been officially tested in conjunction with various parameters and in various setups. When properly installed, SWS offers:
Lasting Thermal and Acoustic Insulation
This product is supplied in Gun Grade cans with DuraValve™.
DuraValve™ is a unique valve system that improves the yield and performance of Soudafoam products over much longer time periods than standard valves.
DuraValve™ puts an end to commonly known issues such as poor yield and non-extrusion of PU Foams and is a standard for most gun applied Soudafoam Products.
3 times more flexible then standard PU Expanding foam
Water Vapour Open
Excellent stability (no shrinkage or postexpansion)
High filling capacity
Good adhesion on all surfaces (except PE, PP and PTFE).
High insulation value, thermal and acoustic
Very good bonding properties.
Very precise to dose.
Elastic and compressible.
Freon free (not harmless to ozone layer and greenhouse effect)
All foam applications in static and not static joints.
Installing of window and door frames.
Recommended for all A, A+ and A++ Rated windows and doors
Filling of cavities.
Sealing of all openings in roof constructions.
Apply of a sound absorbing layer.
Improving thermal isolation in cooling systems.
Product Basis: Polyurethane Foam Filler
Linear Yield FEICA TM1002 (750ml Gun Grade Cannister): 22 Metres
Acoustic Rating ISO 717-1: 60 dB
Thermal Conductivity DIN 52612: 34.5mW/mK
Fire Class (DIN4102): B2 Fire Rated
Application Temperatures: -10°C to +30°C
Baustoffklasse B2 (DIN 4102-1) - Prüfzeugnis P-SAC 02/III-164 (MFPA Leipzig).
Acoustical insulation (EN ISO 717-1) - PB 16733428 (IFT Rosenheim).
Thermal conductivity (DIN 52612) - PB 070598.1 Hu (MPA Bau Hannover).
Air permeability (DIN 18452) - PB 105334285 (IFT Rosenheim).
Water vapour permeability (DIN EN ISO 12572) - PB 50933428 (IFT Rosenheim).
Shake the aerosol can for at least 20 seconds. Attach the can onto the Applicator Gun. Surface should be free from grease and dust.
Moisten surfaces with a water sprayer prior to application.
For non-conventional substrates a preliminary adhesion test is recommended.
Fill holes and cavities approximately ¾ full as the foam will expand.
Repeat shaking regularly during application.
If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foam Cleaner or acetone.
Cured foam can only be removed mechanically or with Cured PU Foam Remover. Never burn away cured foam.
Take the usual labour hygiene into account.
Always wear gloves and goggles during application. See our Safety & PPE Products.
Consult label and material safety data sheet for more information.
We've added to your cart