A range of Mitre Kits & Superglue products, commonly used in the furniture, timber, kitchen and plastics industries where its instant bonding properties dramatically reduce assembly times for mitre joints when compared to conventional wood adhesives.
Also suitable for instant bonding of MDF, rubber, PVCu, metals and most plastics.
Soudal | Mitre Kit
The Soudal Mitre Kit consists of a High Viscosity, Super Fast Curing, Cyanoacrylate Based Adhesive (Superglue) with an Aerosol Activator.
The Soudal Mitre Kit is particularly useful for production lines and uPVC Window Trim. Activator reduces blooming and odour. Easy to use and fast acting, curing will occur almost instantly.
1 x Superglue Activator - 200ml Aerosol
1 x Superglue HV (High Viscosity) Adhesive - 50gm Bottle
Cyanoacrylate Based Adhesive with Activator Spray
High Viscosity Adhesive
High Bond Strength
Super Fast Bonding
Works on most Non-Porous Materials
Ideal for Vertical Surfaces
The Mitre Kit can be used in the furniture, timber, kitchen and plastics industries where its instant bonding properties dramatically reduce assembly times for mitre joints when compared to conventional wood adhesives.
The Mitre Kit is also suitable for instant bonding of MDF, rubber, PVCu, metals and most plastics.
Spray a small quantity of Activator onto one substrate only. Allow solvent to evaporate.
Apply Cyanoacrylate Adhesive (Superglue) to the other substrate and bring together. Curing will occur almost instantly
Take precautions not to spray Activator near unused Cyanoacrylate adhesive as this will cure off.
Balsa / Balsa: <5 Seconds
Oak / Oak: 90-180 Seconds
Nitrile / Nitrile: <5 Seconds
Neoprene / Neoprene: <5 Seconds
EPDM / EPDM: <5 Seconds
Steel / Steel: 10-20 Seconds
PVC / PVC: 3-10 Seconds
Polycarbonate / Polycarbonate: 10-40 Seconds
Grit Blasted Steel: >15 N/mm²
Etched Aluminium: >11 N/mm²
Nitrile Rubber: >10 N/mm²
Polycarbonate: >12 N/mm²
Grit Blasted Steel: >18 N/mm²
Nitrile Rubber: >5 N/mm²
Neoprene Rubber: >5 N/mm²
EPDM Rubber: >2,5 N/mm²
Soudal | Superglue
Soudal Superglue HV is A High Viscosity, Super Fast Curing, Cyanoacrylate Based Adhesive for use on non-porous surfaces.
Cyanoacrylate Based Adhesive
Soudal Superglue HV is used for Fast Bonding of non porous surfaces, such as rubber, metals, plastics, glass etc. Adhesion can be accelerated by using a Superglue Activator Spray.
The surfaces to be glued should be clean, dry and free from dust, grease and other contaminants.
Materials should be stored in a warm environment prior to bonding to avoid chilling of the glue line, which leads to extended setting times.
Where possible, ensure working environment has a relative humidity of 50%+.
Apply adhesive to one surface only. Press surfaces together and hold for at least 10 seconds. Pressing times may be longer depending on substrates being glued together.
Cure speed is rapid so exercise care when aligning.
Curing will occur almost instantly however if used with an Activator Spray (see our Mitre Kit).
We've added to your cart