Lignum Timber Treatments | Woodworm & Dry Rot Treatment
Lignum Pro Gel is an effective deep penetrating thixotropic 'mayonnaise' type paste for the eradication and prevention of attack by wood boring insects and for the prevention of attack by wood rotting fungi. It is effective against all life stages of wood boring insects.
Lignum Pro Gel has no odour, is non staining, non flammable and can be applied by injection or brush.
Lignum Pro Gel can be over painted with any wood finish once dry with no losses due to evaporation.
Lignum Pro Gel carries the HSE Approval No 10154.
Supplied in either 300ml Cartridges or 7.5 Litre Buckets.
Eradicates wood boring insects and prevents re-infestation
Protects against wood rotting fungi
BS EN Certification
No drips, no odour, does not evaporate.
Excellent adhesion and penetration into wood.
No re-entry time
Does not stain or discolour wood
Supports any subsequent finishing
Permethrin 0.34% w/w: A commonly used Pyrethroid Insecticide which has excellent efficacy against a wide range of wood boring insects.
Propiconazole 0.85% w/w: A Triazole Fungicide which has excellent efficacy against a range of wood destroying fungi.
IPBC (3-Iodo-2-Propynyl Butyl Carbamate) 0.40%: A Carbamate Fungicide which is added to improve the efficacy envelope even further providing excellent efficacy against a range of wood staining fungi.
The active ingredient in the formulation is sourced from and supplied by manufacturers who have supported the compound through the Biocidal Products Directive [98/8 EC] or more recently the Biocidal Products Regulations [528/2012] and in compliance with Article 95 of the Biocidal Products Regulation.
Lignum Pro Gel is being supported under the European Biocidal Products Regulation [528/2012]. Efficacy of this product has been proven to industry established and European standards.
Wood Destroying Fungi(Basidiomycetes)
Wood should be clean and free from wood dust and other contaminants, paint, varnish, oil etc.
Apply by Brush or Injection.
Preventative: 100ml - 200ml/m² (1L per 5-10m²)
Curative: 250ml/m² (1L per 4m²)
Unprotected persons and animals should be kept away from treated surfaces until dry.
Product does not have a finish once dry. It is always advisable to try on a small inconspicuous area before application to ensure product finish is as expected.
Product is stable in original packaging for 2 years when stored under ambient conditions. After 2 years product should be re-tested every 6 months to ensure active ingredient levels are within specification.
We've added to your cart