Lignum Pro I62.5 is a very effective Concentrated Woodworm Treatment used for the eradication and prevention of Woodworm and other wood boring insects. Lignum Pro I62.5 Woodworm Treatment dilutes with water to make up to 25 Litres of Ready-to-use product.

Supplied in 1 Litre Containers, Concentrated Solution.

  Lignum Pro I62.5 woodworm treatment carries the HSE Approval No 9894.

  Read our Guide on 'How to Treat Woodworm & Wood Boring Insects'.

Description

Lignum Pro I62.5 is a woodworm treatment based on micro-emulsion technology which produces a formulation with a particle size in the nanometre range. This tiny particle size allows the formulation to penetrate deep into the timber in order to deliver the active ingredient (insecticide) to prevent or eradicate wood boring insect attack.

Lignum Pro I62.5 woodworm treatment is effective against all life stages of wood boring insects. It has virtually no odour and can be applied either by brush or low pressure spray to provide long lasting protection.

The formulation is water-based producing a non-flammable, quick drying product containing no volatile organic compounds (VOCs). The concentrated product is diluted with water.

  Read our Guide on 'How to Treat Woodworm & Wood Boring Insects'.

Product Benefits:

• Dilutes to make up to 25 litres of Ready-to-use Product

• BS EN Certification

• Eradicated Wood Boring Insects

• Prevents Re-infestation

• Microemulsion Water Based Formula

• Zero VOC's

• Quick Drying

• Non Flammable

Active Ingredients:

Permethrin

Permethrin 62.5g/L: A commonly used Pyrethroid Insecticide which has excellent efficacy against a wide range of wood boring insects.

The active ingredient in the formulation is sourced from and supplied by manufacturers who have supported the compound through the Biocidal Products Directive [98/8 EC] or more recently the Biocidal Products Regulations [528/2012] and in compliance with Article 95 of the Biocidal Products Regulation.

Lignum Pro I62.5 Insecticide is being supported under the European Biocidal Products Regulation [528/2012]. Efficacy of this product has been proven to industry established and European standards.

Efficacy Certification:

Application

Health & Safety Recommendations:

Take the usual labour hygiene into account.

PPE should be worn during application. See our Safety & PPE Products.

Consult label and material safety data sheet for more information.

Preparation:

Wood should be clean and free from wood dust and other contaminants.

Application Method:

Apply by Brush or Low Pressure Spray.

Coverage:

• Preventative: 200ml/m² (1L per 5m²)

• Curative: 300ml/m² (1L per 3.3m²)

A 1 Litre Concentrate (once diluted) treats 82.5m² - 125m² of timber depending on use.

Drying:

Product is touch dry in 1 hour depending on wood and ambient conditions. Unprotected persons and animals should be kept away from treated surfaces for 48 hours or until dry.

Finish:

Product does not have a finish and leaves the same effect as applying water or solvent. It is always advisable to try on a small inconspicuous area before application to ensure product finish is as expected.

Stability:

Product is stable in original packaging for 2 years when stored under ambient conditions. After 2 years product should be re-tested every 6 months to ensure active ingredient levels are within specification.

Data Sheets

Technical Data Sheet

Safety Data Sheet