Lignum Timber Treatments | Woodworm & Dry Rot Treatment
Lignum Pro D156 is a Concentrated Dual Purpose Timber Treatment used to treat Woodworm and Wood Rotting Fungi (Dry Rot and Wet Rot). Lignum Pro D156 dilutes with water which makes up to 25 Litres of Ready-to-use product.
Lignum Pro D156 should only be used on Timbers. For an effective Dry Rot Treatment on Masonry substrates, see Lignum Pro M50.
Lignum Pro D156 carries the HSE Approval No 9895.
Supplied in 1 Litre Containers, Concentrated Solution.
Lignum Pro D156 is a dual purpose (Fungicide / Insecticide) treatment based on microemulsion technology which produces a formulation with a particle size in the nanometre range. This tiny particle size allows the formulation to penetrate deep into the timber in order to deliver the active ingredient (a combination of fungicide and insecticide) to prevent or eradicate insect attack and to prevent fungal decay and staining.
Lignum Pro D156 is effective against a wide range of wood rotting fungi (both Wet Rot & Dry Rot) whilst the pyrethroid insecticide is effective against all life stages of wood boring insects. It has virtually no odour and can be applied either by brush or low pressure spray to provide long lasting protection.
The formulation is water-based producing a non-flammable, quick drying product containing no volatile organic compounds (VOCs). The concentrated product is diluted with water.
Dilutes to make up to 25 litres of Ready-to-use Product
BS EN Certification
Kills active Wood Boring Insect attack and prevents re-infestation
Prevents Fungal Decay and Blue Stain
Microemulsion Water Based Formula
Permethrin 32.25g/L: A commonly used pyrethroid insecticide which has excellent efficacy against a wide range of wood boring insects.
Propiconazole 93.75g/L: A Triazole Fungicide which has excellent efficacy against a range of wood destroying fungi.
IPBC (3-Iodo-2-Propynyl Butyl Carbamate) 31.25g/L: A Carbamate Fungicide which is added to improve the efficacy envelope even further providing excellent efficacy against a range of wood staining fungi.
The active ingredients in the formulation is sourced from and supplied by manufacturers who have supported the compound through the Biocidal Products Directive [98/8 EC] or more recently the Biocidal Products Regulations [528/2012] and in compliance with Article 95 of the Biocidal Products Regulation.
Lignum Pro D156 Fungicide & Insecticide is being supported under the European Biocidal Products Regulation [528/2012]. Efficacy of this product has been proven to industry established and European standards.
Take the usual labour hygiene into account.
PPE should be worn during application. See our Safety & PPE Products.
Consult label and material safety data sheet for more information.
Wood should be clean and free from wood dust and other contaminants.
Apply by Brush or Low Pressure Spray.
1L + 24L Water: 200ml/m² (1L per 5m²)
2L + 23L Water: 100 - 300ml/m² (1L per 3.3 - 10m²)
A 1 Litre Concentrate (once diluted) treats 82.5m² - 250m² of timber depending on use.
Product is touch dry in 1 hour depending on wood and ambient conditions. Unprotected persons and animals should be kept away from treated surfaces for 48 hours or until dry.
Product does not have a finish and leaves the same effect as applying water or solvent. It is always advisable to try on a small inconspicuous area before application to ensure product finish is as expected.
Product is stable in original packaging for 2 years when stored under ambient conditions. After 2 years product should be re-tested every 6 months to ensure active ingredient levels are within specification.
We've added to your cart