The Soudal Mitre Bond Kit consists of a High Viscosity, Super Fast Curing High Viscosity Superglue Adhesive with an Aerosol Activator. The Soudal Mitre Bond Kit is mainly used in the furniture, timber, kitchen and plastics industries where its instant bonding properties dramatically reduce assembly times for mitre joints compared to other adhesives.

Kit supplied with 50g High Viscosity Superglue Adhesive and 200ml Superglue Activator.

Description

Soudal Mitre Bond Kit

The Soudal Mitre Bond Kit consists of a High Viscosity, Super Fast Curing, Cyanoacrylate Based Adhesive (Superglue) with an Aerosol Activator.

The Soudal Mitre Bond Kit is particularly useful for production lines and uPVC Window Trim. Activator reduces blooming and odour. Easy to use and fast acting, curing will occur almost instantly.

Kit Contents:

• 1 x Superglue Activator - 200ml Aerosol

• 1 x Superglue HV (High Viscosity) Adhesive - 50gm Bottle

Properties:

• Cyanoacrylate Based Adhesive with Activator Spray

• Two-Part System

• Thixotropic Formulation

• High Viscosity Adhesive

• High Bond Strength

• Super Fast Bonding

• Works on most Non-Porous Materials

• Ideal for Vertical Surfaces

Typical Applications:

The Mitre Kit can be used in the furniture, timber, kitchen and plastics industries where its instant bonding properties dramatically reduce assembly times for mitre joints when compared to conventional wood adhesives.

The Mitre Kit is also suitable for instant bonding of MDF, rubber, PVCu, metals and most plastics.

Application

Application Method:

Spray a small quantity of Activator onto one substrate only. Allow solvent to evaporate.

Apply Cyanoacrylate Adhesive (Superglue) to the other substrate and bring together. Curing will occur almost instantly

Remarks:

Take precautions not to spray Activator near unused Cyanoacrylate adhesive as this will cure off.

Mechanical Properties

Cure Speed:

• Balsa / Balsa: <5 Seconds

• Oak / Oak: 90-180 Seconds

• Nitrile / Nitrile: <5 Seconds

• Neoprene / Neoprene: <5 Seconds

• EPDM / EPDM: <5 Seconds

• Steel / Steel: 10-20 Seconds

• PVC / PVC: 3-10 Seconds

• Polycarbonate / Polycarbonate: 10-40 Seconds

Shear Strength:

• Grit Blasted Steel: >15 N/mm²

• Etched Aluminium: >11 N/mm²

• Nitrile Rubber: >10 N/mm²

• Polycarbonate: >12 N/mm²

Tensile Strength:

• Grit Blasted Steel: >18 N/mm²

• Nitrile Rubber: >5 N/mm²

• Neoprene Rubber: >5 N/mm²

• EPDM Rubber: >2,5 N/mm²

Data Sheets

Technical Data Sheet

Safety Data Sheet