Damp Proof Cream
Damp Proof Membrane
Tanking Slurry Systems
Waterproof Membrane Kits
External Drainage Membrane
Nuaire PIV units
Crack Stitching Bars
Browse All Deals
ACS Anti Mould & Anti Bacterial Paint Emulsion is a premium quality, waterborne, low odour coating, guaranteed to protect against unsightly and unhygienic condensation moulds and potentially pathogenic bacterial growth on walls and ceilings in domestic and commercial premises.
ACS Anti Mould & Anti Bacterial Paint Emulsion is supplied in 2.5 Litre and 5 Litre Buckets, available in Brilliant White colour only. Provides a Matt Finish when fully dry.
on orders over £75(ex. VAT, mainland UK only)
Free Help & Advice
Call 01355 222 777Mon.-Fri 8:30am - 4:15pm, or email us
Next Day Delivery
Order Before 2:30pm for Same Day Despatch (terms apply)
A proudly independent family business with 40 years experience
The unsurpassed performance of ACS Anti Mould & Anti Bacterial Paint Emulsion is achieved by combining modern paint technology with highly advanced, proven biocides to provide a protection system that is ‘locked’ into the whole of the paint.
ACS Anti Mould & Anti Bacterial Paint Emulsion is formulated to impart toughness, elasticity and resistance to moisture with durability in a high quality decorative coating.
ACS Anti Mould & Anti Bacterial Paint Emulsion should NOT be covered with any other paint or wallpaper.
The coating, when completely dry, is fully washable and resistant to the effects of condensation.
Suitable for use in homes, schools, hospitals, offices, commercial and industrial environments.
ACS Anti Mould & Anti Bacterial Paint Emulsion carries the HSE Approval No 6308.
ACS Anti Mould & Anti Bacterial Paint Emulsion will help landlords and owners of tenanted properties to comply with Section 82 (Statutory Nuisance) Chapter 43 of The Environmental Protection Act 1990. Either alone or as part of an overall strategy to prevent condensation, mould and bacterial growth.
This product is effective against E. coli 0157, Salmonella sp., Staphylococcus aureus, Listeria monocytogenes, Shigella sp. and most other bacteria, and is designed as a support to, but not a substitute for, a regular cleaning and hygiene regime.
Guaranteed for a minimum of FIVE YEARS to prevent the recurrence of Black Mould.
Approved as a biocidal paint under the Control of Pesticides Regulations 1986.
Easy to use and cost effective.
Remove any loose material such as old paint, grease, dirt, mould or defective wallpaper. ACS Mould Wash Concentrate can be used for “wetting in” purposes when removing wallpaper.
Make good any defects in the surface and rub down to a smooth finish.
Wash and clean all surfaces (walls, ceilings, window frames and joinery) using diluted ACS Mould Wash Concentrate. If necessary clean badly affected areas a second time.
Allow to dry thoroughly.
STIR THOROUGHLY BEFORE USE.
Apply two coats of ACS Anti Mould Emulsion by brush or roller, allowing sufficient drying time between coats. Two coats must be applied to achieve full protection
Clean equipment with clean tap water before the paint dries.
ACS Anti Mould Emulsion must not be covered with any other paint or wallpaper.
N.B. If an unfinished, textured wallpaper (blown vinyl, woodchip) or similar is to be used then it should be hung after the ACS Mould Wash Concentrate has fully dried. The wallpaper should be coated with ACS Antimould Emulsion as above.
Touch dry in 1 hour. Can be re-coated after 2-4 hours dependent on conditions.
Approximately 10m² - 12m² per Litre. Extra allowance should be made for rough or porous surfaces.
Designed & built by Mucky Puddle
Spend another £75.00 for free UK mainland delivery!