Damp Proof Cream
Damp Proof Membrane
Tanking Slurry Systems
Waterproof Membrane Kits
External Drainage Membrane
Nuaire PIV units
Crack Stitching Bars
Browse All Deals
ACS Anti Mould Paint Additive will convert an ordinary decorative paint into a mould resistant coating for walls and ceilings.
Each 50ml Bottle will mix into 2.5L of any standard paint or emulsion.
on orders over £75(ex. VAT, mainland UK only)
Free Help & Advice
Call 01355 222 777Mon.-Fri 8:30am - 4:15pm, or email us
Next Day Delivery
Order Before 2:30pm for Same Day Despatch (terms apply)
A proudly independent family business with 40 years experience
ACS Anti Mould Paint Additive is suitable for mixing into the following product types:
Gloss (Oil Based)
Acrylic Paints (Water Based)
ACS Anti Mould Paint Additive carries the HSE Approval No 8627.
Prepare the surfaces to be painted by removing any loose or flaking material (including wallpaper) and filling all cracks and defects in the normal way.
Use ACS Mould Wash Concentrate to clean down the prepared area. Dilute 1 part concentrate to 19 parts water (i.e a 250ml bottle of this product as supplied will make up to 5 litres when mixed with water).
With a soft cloth, sponge or soft brush, wash down all areas to be painted with the diluted concentrate taking care to remove any oil, grease or surface debris.
Allow drying thoroughly.
Store any unused concentrate in its original container tightly closed and out of reach of children. Diluted material should be decanted into a suitable plastic container and stored for future use (Do NOT use a Metal container). Mark the container with an Indelible pen.
Never use a food or drinks container and never leave a container unmarked.
Carefully open the ACS Anti Mould Paint Additive container and add the entire contents to the paint.
Use 1 x 50ml bottle of ACS Anti Mould Paint Additive per every 2.5 litres of Emulsion, Paint Product, Tile Grout, Wallpaper Paste etc...
STIR VERY THOROUGHLY BEFORE USE, paying particular attention to the bottom of the can to disperse the additive throughout the paint.
Apply the paint in the normal way according to the manufacturer’s instructions.
Do not overcoat the antimould finish (or wallpaper over it) as this will effectively seal in the mould resistant finish and allow the mould to grow back. ACS Anti Mould Paint Additive should only be used in conjunction with the 'finish' coat.
N.B. If an unfinished, textured wallpaper (blown vinyl, woodchip etc.) or similar is to be used then it should be hung after the diluted ACS Mould Wash Concentrate has fully dried. The wallpaper should then be coated with the anti-mould finish as above.
Designed & built by Mucky Puddle
Spend another £75.00 for free UK mainland delivery!