Wykamol ThermalDry Anti Condensation Paint is a Thermally Insulating Water-Based Coating which incorporates hollow glass beads that act like a miniature ‘Thermos Flask’, reflecting thermal energy away from the walls, preventing the water from condensing for increased condensation control.

This Anti Condensation Paint is supplied in 2.5 Litre and 5 Litre Buckets, available in White colour only. Platinum Building Chemicals supply a wide variety of condensation control and mould control products to aid with mould eradication and treatment.

Description

Wykamol ThermalDry Anti Condensation Paint

Wykamol ThermalDry Anti Condensation Paint is a styrene acrylic co-polymer dispersion water based coating which is thermally insulating and water repelling.

Wykamol ThermalDry Anti Condensation Paint incorporates Micro-technology in the form of hollow glass beads, with a size of 50um and a crush strength of 500 psi.

The micro, hollow glass beads act like a miniature ‘Thermos Flask’, reflecting thermal energy away from the walls, preventing the water from condensing.

The prevention of moisture forming on walls therefore inhibits mould growth.

This Anti Condensation Paint also increases the wall temperature, thus reducing the ‘dew point’ or the temperature at which condensation occurs.

Product Uses:

• Bathrooms

• Utility rooms

• Kitchens

• Lintels over Windows and Doors which produce cold spots

• Cold Walls and Ceilings

• Industrial Applications

Product Advantages:

• Coating is Waterproof When Dry and Walls are Warm to the Touch

• Prevents Formation of Black Mould and Other Harmful Fungi

• Suitable for Any Interior Wall - Particularly Exterior Facing Walls, Bathrooms and Kitchens

• Takes Up to 60% Longer for Condensation to Occur on Walls

• Increase the Life of Your Chosen Paint or Wallpaper Finish

• Can Be Over Painted or Wall Papered Over With Any Finish, Without Reducing Its Effectiveness

• Antibacterial Properties

• Warm Air is Reflected Back Into the Room, Rather Than Being Absorbed by Cold Walls, Increasing Its Overall Temperature

Application

Substrate Preparation:

Ensure surface is free from mould and fungus using MCS1 Mould Clear Solution.

Remove any loose paint or wallpaper, grease and oil stains. Any cracks must be filled using a crack filler and left to set before application can commence.

For coating over plastic or metal, it is advisable to complete a test on the substrate first.

Mixing:

Upon opening the tin, gently stir the medium in order to ensure glass bubbles are evenly spread throughout.

DO NOT USE mechanical stirrer as this could damage the glass beads.

Application Method:

Wykamol ThermalDry is designed for easy application with either a brush or roller.

Allow 2-4 hours between application of coats. A two-coat application is necessary to achieve maximum effectiveness.

Do not apply Wykamol ThermalDry below 5°C or above 30°C.

Curing:

Allow for 2-4 hours between application of second coat of Wykamol ThermalDry and before applying chosen finish.

Coverage:

Approximately 4m² - 5m² per Litre, based on a two-coat application.

Data Sheets

Technical Data Sheet

Safety Data Sheet