SX70 Wood Stains
Boracol
Damp Proof Membrane
Damp Proof Cream
Tanking Slurry Systems
Explore Newton
Shop Wykamol Membranes
Waterproof Membrane Kits
Nuaire PIV units
Extract Fans
Splice Plates
Crack Stitching Bars
Explore Soudal
Fix ALL Rewards!
'Genius Gun' Foam Range
Special Offers
Wonder Grip Hub
Browse All Deals
How To Damp Proof Walls
Woodworm: Ultimate Guide
How To Stop Condensation
How To Seal Window Frames
Soudal D2 Superfast PVA Wood Adhesive is an advanced PVA-based wood glue designed for quick and robust bonding of wood and paper products.
Known for its ultra-fast drying capabilities and high-end strength, this adhesive becomes semi-transparent upon drying, seamlessly blending into the woodworking projects.
Suitable for a variety of applications from assembly to construction bonds, it offers efficient and reliable performance, making it a staple in both professional and DIY settings.
Size
Free Delivery
on orders over £100(ex. VAT, mainland UK only)
Free Help & Advice
Call 01355 222 777Mon.-Fri 8:30am - 4:15pm, or email us
Next Day Delivery
Order Before 2:30pm for Same Day Despatch (terms apply)
Great Service
A proudly independent family business with 40 years experience
Soudal D2 Superfast PVA Wood Adhesive is formulated with polyvinyl acetate (PVAc), which accounts for its high viscous fluid consistency ideal for woodworking applications. The adhesive features a physical drying curing system, achieving a solid content of approximately 50%. With an open time of roughly 5 minutes at 23°C and 55% relative humidity, it provides a rapid setting capability, essential for fast-paced environments. The minimum film-forming temperature is 6°C, ensuring usability in cooler conditions without loss of effectiveness.
The D2 Superfast PVA Wood Adhesive sets a new standard with its very fast curing time, requiring minimal pressing times of about 30 minutes, and a pressing pressure ranging from 1 kg/cm² to 2 kg/cm². It is tailored for water-resistant applications as classified under EN204 (D2 level), indicating resistance to moisture, making it suitable for indoor environments where occasional water contact occurs.
This adhesive is easy to apply, can be tooled within its open time, and adjusts to varying application needs, from thin brush applications to spreader-applied layers. It offers a consumption rate of 80 - 120 g/m² for full surface bonding and 150 - 180 g/m² for assembly bonding, making it economical without compromising bond quality.
Ultra-Fast Drying: Cuts waiting time significantly with a curing time that supports fast-paced project timelines, allowing for quicker progression to subsequent stages of woodwork.
High Bond Strength: Achieves superior end strength, ensuring durable and robust joints capable of supporting various structural and decorative applications.
Semi-Transparent Finish: Dries to a semi-transparent finish that does not detract from the natural beauty of wood grains, making it ideal for visible areas of furniture and fittings.
Versatility in Applications: Can be used across a diverse range of woodworking projects, including delicate veneer work and robust construction joints.
Ease of Application: The high viscous consistency allows for precise application without dripping, providing a clean working environment and efficient usage.
Wood Construction Bonds: Ideal for creating strong and lasting joints in wooden construction elements such as frames, cabinets, and shelving.
Veneer and Laminate Bonding: Perfect for adhering thin veneers and laminates to various wood substrates, ensuring a smooth and durable finish.
Assembly of Soft Wood: Excellent for general carpentry and craft projects, including furniture assembly and decorative woodworking, where quick setting is beneficial.
Bonding of Wood and Paper Products: Effective for crafting and model-making where different materials need to be bonded securely and discreetly.
Mortise and Tenon Joints: Provides reliable adhesion for traditional woodworking joints, enhancing the structural integrity of joined sections.
Soudal D2 Superfast Wood Adhesive is optimally designed for use on porous substrates such as wood and carton. The materials intended for bonding must be flat, well-fitting, and rigid to ensure effective adhesion.
Although primarily used for porous materials, this adhesive can also be applied to slightly smoother, non-porous surfaces, provided they are adequately prepared to improve bonding effectiveness.
To achieve the best results, surface preparation is crucial. Ensure that all surfaces to be bonded are clean, dry, and free of dust, grease, or any other contaminants.
For smoother substrates, a light sanding or grinding might be necessary to create a more adhesive-friendly surface. Conducting a preliminary adhesion test on the intended materials is recommended to verify the compatibility and effectiveness of the adhesive under the specific conditions of your project.
Importantly, do not dilute the adhesive as this can adversely affect its performance.
Application of Soudal D2 Superfast Wood Adhesive should be precise to ensure optimal results. Use a fine-toothed comb or brush to apply an even layer of adhesive to one of the surfaces to be bonded.
It is not necessary to apply adhesive to both surfaces, but ensure comprehensive coverage on the selected surface. Once the adhesive is applied, quickly align and join the parts together. This adhesive has a fast open time, so swift action is necessary.
After aligning, apply pressure to the bonded materials for at least 30 minutes. The necessary pressing time can vary based on the ambient temperature and the specific requirements of the project.
If using a press, adjust the temperature and duration according to the thickness and type of wood being bonded to ensure the adhesive cures properly.
Following the pressing time, check the bond integrity before the adhesive fully cures to make any necessary adjustments.
Soudal D2 Superfast Wood Adhesive dries to a semi-transparent finish, blending neatly with most wood finishes.
Any excess adhesive should be wiped off with a damp cloth before it dries to prevent any residue from hardening on the surface of the wood.
Cleaning should be performed immediately after use to avoid the adhesive setting on tools and work surfaces. Soudal D2 Superfast Wood Adhesive can be removed with water while still wet.
Once cured, the adhesive is resilient and can only be removed mechanically, such as by sanding or scraping, which could damage the substrate if not done carefully.
A) Soudal D2 Superfast Wood Adhesive is a high-performance, PVA-based wood glue designed for rapid bonding. It is known for its ultra-fast drying capabilities and robust end strength, making it suitable for a variety of woodworking applications.
A) This adhesive is specifically formulated for porous substrates such as wood and carton, ideal for bonding everything from soft woods to denser hardwoods and paper products.
A) The adhesive has a very fast curing time, with an open time of approximately 5 minutes at normal room temperature and humidity levels, allowing for rapid progression in projects.
A) It has a D2 water resistance rating, which means it can withstand some exposure to moisture, making it suitable for indoor environments where occasional water contact might occur.
A) Due to its D2 rating, it is not recommended for outdoor use where it would be exposed to frequent or prolonged moisture.
A) The minimum film-forming temperature is 6°C, which means it can be applied and will cure effectively in cooler conditions down to this temperature.
A) It has a high viscosity range of 30,000 to 40,000 mPa.s, ensuring it remains in place upon application without dripping, ideal for precise applications.
A) Surfaces should be clean, dry, and free of any dust, grease, or contaminants. Light sanding or grinding may be necessary for smoother, non-porous surfaces to enhance adhesion.
A) It should be applied with a fine-toothed comb or brush to one of the bonding surfaces. Ensure comprehensive coverage for effective bonding.
A) The adhesive requires a minimum of 30 minutes of pressing time under a pressure of 1 to 2 kg/cm², depending on the substrates and environmental conditions.
A) Soudal D2 Superfast Wood Adhesive has a pH level between 4.0 and 5.5, indicating its mild acidity which is typical for PVA-based adhesives.
A) Consumption rates vary based on the application method: 80 - 120 g/m² for full surface bonding and 150 - 180 g/m² for assembly bonding.
A) Yes, it is excellent for bonding veneers and laminates, providing a strong bond that dries semi-transparent to maintain the aesthetic quality of the materials.
A) Any excess adhesive should be wiped off with a damp cloth before it dries. Once set, the joint should be checked for integrity and corrected if necessary before the adhesive fully cures.
A) While still wet, the adhesive can be cleaned with water. Once cured, it must be removed mechanically.
A) While it provides strong bonding, additional mechanical fasteners are recommended for structural applications to ensure safety and durability.
A) There is minimal shrinkage due to its high solid content, ensuring a stable and consistent bond as it cures.
A) Its primary limitation is moisture exposure, as it is not suitable for environments where the adhesive would be in continuous contact with water.
A) It should be stored in a cool, dry place away from extreme temperatures and direct sunlight to maintain its shelf life.
A) Absolutely, it is ideal for furniture making, especially in creating mortise and tenon joints, dovetails, and other intricate wood joinery.
A) Adequate ventilation should be ensured in the working area, and protective gloves and eyewear should be worn to avoid irritation from prolonged contact or inhalation.
A) Lower temperatures may prolong the curing time, while very high temperatures can shorten the open time, affecting workability.
A) Thinning is not recommended as it can adversely affect the performance and water resistance of the adhesive.
A) Soudal D2 Superfast Wood Adhesive is not flammable, but it is advisable to keep it away from open flames and hot surfaces during use.
A) Yes, but the painted or treated surfaces should be properly prepared to ensure good adhesion. A test application is recommended.
A) Once opened, if properly sealed and stored, the adhesive can remain usable for several months without significant degradation.
A) It is suitable for all common types of wood, including softwoods and hardwoods used in various woodworking projects.
A) Yes, its fast curing time and easy tooling make it suitable for fast-paced production environments like assembly lines.
A) Ensure the correct amount of adhesive is applied, surfaces are properly prepared, and adequate pressure is applied during the curing period.
A) Apply the adhesive evenly and avoid excessive application to maintain its semi-transparent appearance after drying, ensuring it blends well with the wood surfaces.
Coming Soon
Description
Application
FAQ's
Data Sheets
Spend another £100.00 for free UK mainland delivery!
