Lignum Wood Preserver - Ready to Use

Lignum Wood Preserver - Ready to Use

Lignum Timber Treatments | Woodworm & Dry Rot Treatment

New Product

Lignum Wood Preserver is an effective ready-to-use Wood Treatment used for the prevention of Fungal Decay (Dry Rot & Wet Rot) and Woodworm on timber structures. Lignum Wood Preserver is water-based and is suitable for both interior and exterior use.

Lignum Wood Preserver is used as a preventative and is not recommended to treat 'active' Woodworm or Fungal Decay.

  Lignum Wood Preserver carries the HSE Approval No 10145.

Available in 1 Litre or 5 Litre Containers, Ready to Use Solution.

Description

Lignum Wood Preserver

Lignum Wood Preserver is based on microemulsion technology which produces a formulation with a particle size in the nanometre range. This tiny particle size then allows the formulation to penetrate deep into the wood to deliver active ingredient (a combination of insecticide & fungicides) to prevent wood boring insect attack and prevent wood rot / decay.

Lignum Wood Preserver is effective against a wide range of wood rotting fungi (both wet & dry rot) whilst the pyrethroid insecticide is effective against all life stages of wood boring insects (i.e woodworm). It has virtually no odour and can be applied either by brush or low pressure spray to provide lasting protection.

The formulation is water-based producing a non-flammable, quick drying product containing no volatile organic compounds (VOC’s) and is ready to apply direct from the container.

The range of Lignum Timber Treatment products offer solutions to both the DIY and Professional user of timber treatment products under the new European Biocidal Products Regulation.

The Lignum Range of ready to use products offer the convenience and flexibility required by the DIY and professional user to carry out timber treatments in and around the home.

Product Benefits:

  • Ready-to-use Product - No Diluting Required

  • Prevents Fungal Decay

  • Prevents Attack by Wood Boring Insects

  • Interior and Exterior Use

  • Certified to European & Industry Standards

  • Microemulsion Water Based Formulation

  • Zero VOC’s

  • Quick Drying

  • Non Flammable

  • BS EN Certification

Active Ingredients:

Permethrin

Permethrin 1.25g/L: A commonly used Pyrethroid Insecticide which has excellent efficacy against a wide range of wood boring insects.

Propiconazole

Propiconazole 3.75g/L: A Triazole Fungicide which has excellent efficacy against a range of wood destroying fungi.

IPBC (3-Iodo-2-Propynyl Butyl Carbamate)

IPBC (3-Iodo-2-Propynyl Butyl Carbamate) 1.25g/L: A Carbamate Fungicide which is added to improve the efficacy envelope even further providing excellent efficacy against a range of wood staining fungi.

The active ingredients in the formulation is sourced from and supplied by manufacturers who have supported the compound through the Biocidal Products Directive [98/8 EC] or more recently the Biocidal Products Regulations [528/2012] and in compliance with Article 95 of the Biocidal Products Regulation.

Lignum Wood Preserver is being supported under the European Biocidal Products Regulation [528/2012]. Efficacy of this product has been proven to industry established and European standards.

Efficacy Certification:

Efficacy Certification
CERTIFIED ORGANISM USE RATE
BS EN 46 House Longhorn Beetle
(Hylotrupes Bajalus)
Preventative 200ml/m²
BS EN 113 White & Brown Rot
(Wood Destroying Basidiomycetes)
Preventative 200ml/m²

 

Application

Health & Safety Recommendations:

Take the usual labour hygiene into account.

PPE should be worn during application. See our Safety & PPE Products.

Consult label and material safety data sheet for more information.

Preparation:

Wood should be clean and free from wood dust and other contaminants.

Application Method:

Apply by Brush or Low Pressure Spray.

Coverage:

Approximately 200ml/m² (1L per 5m²)

Drying:

Product is touch dry in 1 hour depending on wood and ambient conditions. Unprotected persons and animals should be kept away from treated surfaces until dry.

Finish:

Product does not have a finish and leaves the same effect as applying water or solvent. It is always advisable to try on a small inconspicuous area before application to ensure product finish is as expected.

Stability:

Product is stable in original packaging for 2 years when stored under ambient conditions. After 2 years product should be re-tested every 6 months to ensure active ingredient levels are within specification.

Data Sheets

Technical Data Sheet

Safety Data Sheet

More on this product... View Delivery Rates

Clear

£6.25 ex. VAT | £7.50 inc. VAT

  • Reviews

Related Items

  • £6.25 ex. VAT | £7.50 inc. VAT
  • Delivery Rates

    Delivery To... Under £50 ex. VAT £50 or over ex. VAT
    UK Mainland £3.75 FREE
    Scottish Islands £23.75 £20.00
    Northern Ireland £20.00 £20.00
    Isle of Wight £13.25 £9.50
    Republic of Ireland POA POA
    Scilly Isles POA POA
    Isle of Man POA POA