Free Delivery
on orders over £100(ex. VAT, mainland UK only)
Free Help & Advice
Call 01355 222 777
Mon.-Fri 8:30am - 4:15pm, or email us
Next Day Delivery
Order Before 2:30pm for Same Day Despatch (terms apply)
Great Service
A proudly independent family business with 40 years experience
Free Delivery
on orders over £100(ex. VAT, mainland UK only)
Free Help & Advice
Call 01355 222 777
Mon.-Fri 8:30am - 4:15pm, or email us
Next Day Delivery
Order Before 2:30pm for Same Day Despatch (terms apply)
Great Service
A proudly independent family business with 40 years experience
Everbuild Opti-Mix Integral Waterproofer
Everbuild Opti-Mix Integral Waterproofer waterproofs, plasticises and retards with an easily controlled dosage, a consistent mix design and is easy to use with no waste.
Everbuild Opti-Mix Integral Waterproofer can be used for the following applications:
-
Pool and Tank Linings.
-
External Renders.
-
External Pointing.
-
Structures Below Ground Level.
Product Benefits:
-
Concentrated formula: 1 Litre makes 25 Litres of standard Waterproofer.
-
Easy to use gauged bottle.
-
Improves water resistance of mortars.
-
Added plasticising agent improves workability
-
Provides resistance to freeze/thaw cycling.
-
Reduces bleeding.
Health & Safety Recommendations:
Take the usual labour hygiene into account.
PPE should be worn during application. See our Safety & PPE Products.
Consult label and material safety data sheet for more information.
Application Method:
Shake bottle well before use. Push the lid downwards and twist anti-clockwise to remove. Squeeze the sides of the bottle to fill the measuring cup to the required
dose (20-40ml per 50kg of cement).
Add Opti-Mix Integral Waterproofer to water and stir / mix well. Dry mix all other ingredients and add sufficient quantities of water / Opti-Mix Integral Waterproofer solution until the desired consistency is achieved.
Never add this product directly to the dry mix, always let down into a portion of gauging water. Replace cap after use.
Limitations:
-
Do not exceed recommended dosage rate range and DO NOT over mix.
-
Ensure container is always kept in a secure upright position during both storage and transit.
-
Air entraining formulation – not intended for structural concrete.
-
Selection of correct materials and mix design relative to the substrate and exposure levels are of paramount importance.
-
Materials for External Render systems and application methods should be in line with BS8000 Part 10 1995 “Code of Practice for Plastering and Rendering”.
-
Dispose of this product and packaging correctly. Do not allow to enter watercourses. Always read label before use and wear suitable protective equipment.
-
It is the user’s responsibility to determine suitability for use.
Everbuild Opti-Mix Integral Waterproofer
Everbuild Opti-Mix Integral Waterproofer waterproofs, plasticises and retards with an easily controlled dosage, a consistent mix design and is easy to use with no waste.
Everbuild Opti-Mix Integral Waterproofer can be used for the following applications:
-
Pool and Tank Linings.
-
External Renders.
-
External Pointing.
-
Structures Below Ground Level.
Product Benefits:
-
Concentrated formula: 1 Litre makes 25 Litres of standard Waterproofer.
-
Easy to use gauged bottle.
-
Improves water resistance of mortars.
-
Added plasticising agent improves workability
-
Provides resistance to freeze/thaw cycling.
-
Reduces bleeding.
Health & Safety Recommendations:
Take the usual labour hygiene into account.
PPE should be worn during application. See our Safety & PPE Products.
Consult label and material safety data sheet for more information.
Application Method:
Shake bottle well before use. Push the lid downwards and twist anti-clockwise to remove. Squeeze the sides of the bottle to fill the measuring cup to the required
dose (20-40ml per 50kg of cement).
Add Opti-Mix Integral Waterproofer to water and stir / mix well. Dry mix all other ingredients and add sufficient quantities of water / Opti-Mix Integral Waterproofer solution until the desired consistency is achieved.
Never add this product directly to the dry mix, always let down into a portion of gauging water. Replace cap after use.
Limitations:
-
Do not exceed recommended dosage rate range and DO NOT over mix.
-
Ensure container is always kept in a secure upright position during both storage and transit.
-
Air entraining formulation – not intended for structural concrete.
-
Selection of correct materials and mix design relative to the substrate and exposure levels are of paramount importance.
-
Materials for External Render systems and application methods should be in line with BS8000 Part 10 1995 “Code of Practice for Plastering and Rendering”.
-
Dispose of this product and packaging correctly. Do not allow to enter watercourses. Always read label before use and wear suitable protective equipment.
-
It is the user’s responsibility to determine suitability for use.
You Might Also Like
- Choosing a selection results in a full page refresh.
