Everbuild Building Products | Admixtures & Building Chemicals
Everbuild Opti-Mix Mortar Plasticiser is a highly concentrated air entraining liquid plasticising admixture which improves the workability of mortar as it forms extremely stable air bubbles in mortar mixes. This gives the mortar mixes a 'buttery' consistency and helps prevent shrinkage, cracking, crazing and mild frost damage during the curing process.
Supplied in 1 Litre Containers, concentrated solution.
Everbuild Opti-Mix Mortar Plasticiser is a highly concentrated air entraining liquid plasticising admixture which is 25 times the strength of conventional products.
Everbuild Opti-Mix Mortar Plasticiser forms extremely stable air bubbles in mortar mixes.
This improves the workability of mortar, giving it a “buttery” consistency and helps prevent shrinkage, cracking, crazing and mild frost damage during the curing process, as well as providing long term resistance to freeze / thaw cycles.
Everbuild Opti-Mix Mortar Plasticiser replaces lime in the mix and hence reduces the chance of efflorescence (salt formation) and smoothes out variations between separate batches of sand and cement.
Everbuild Opti-Mix Mortar Plasticiser is used for the following applications:
Pointing Mortars
Renders
Screeds
Bricklaying Mortars
Everbuild Opti-Mix Mortar Plasticiser has been tested to BS EN 934-Part 3.
Concentrated formula: Dilute 1L Opti-Mix with 24L of water to make 25L of Mortar Plasticiser.
Easy to use gauged bottle.
Superior Plasticising action.
Improves workability of mortars.
Take the usual labour hygiene into account.
PPE should be worn during application. See our Safety & PPE Products.
Consult label and material safety data sheet for more information.
Shake bottle well before use. Push the lid downwards and twist anti-clockwise to remove. Squeeze the sides of the bottle to fill the measuring cup to the required dose (5-10ml per 50kg of cement).
Add Opti-Mix Mortar Plasticiser to a bucket of water and stir / mix well (use up to a maximum 10ltrs of water).
Dry mix all other ingredients and add sufficient quantities of water / Opti-Mix Mortar Plasticiser solution until the desired consistency is achieved.
Never add Opti-Mix Mortar Plasticiser directly to the dry mix, always let down into a portion of gauging water. Replace cap after use.
Do not use in structural concrete.
Do not exceed the recommended dosage rate range.
Do not mix with other additives in same gauging water.
Do not use in lime based mixes
It is the users responsibility to determine suitability for use.
Dark Brown
We've added to your cart