Soudal | Silicone Sealant
Soudal Silirub ® A is a General Purpose Low Modulus Acetoxy Cure Silicone Sealant.
Soudal Silirub ® A is mould resistant and has primerless adhesion on glass, ceramic, porcelain, metals, stainless steel and wood.
Soudal Silirub ® A is suitable for use in Sanitary Applications.
Very easy to apply
Colourfast and UV resistant
Impervious to mould, contains DCOIT (biocide with fungicidal action)
Permanent elastic after curing
Very good adhesion on many materials
Sanitary, Glazing, Construction and Industrial Applications.
Sealing in bathrooms and kitchens and other areas prone to high humidity.
Sealing of all types of sanitary ware including baths, basins, showers, toilets and glazed tile surrounds.
Perimeter sealing of wooden window & door frames.
Glass to glass sealing joints.
Top sealing of traditional glass and aluminium joints.
Industrial sealing applications; coated metals, anodized aluminium, stainless steel.
HVAC Ducting, pipework, and drainage joints.
General maintenance sealing of cars, caravans, mobile homes and boats.
Surfaces should be clean, dry, free of dust and grease.
Porous surfaces in water loaded applications should be primed with Soudal Primer 150. No primer needed for non-porous substrates.
Not suitable for use on PVC.
There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.
Application Method: With a manual or pneumatic caulking gun.
Cleaning: Clean with a Surface Cleaner immediately after use.
Finishing: With a soapy solution or Soudal Finishing Solution before skinning.
Repair: With the same material
Minimum Width for Joints: 5 mm
Maximum Width for Joints: 30 mm
Minimum Depth for Joints: 5 mm
Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth.
Because of the acid nature, certain metals (eg copper, lead) can be affected.
Do not use on natural stones like marble, granite etc. as it may cause staining.
Direct contact with the secondary sealing of insulating glass units (insulation) and the PVB-film of safety glass must be avoided.
The sanitary formula should not replace regular cleaning of the joint. Excessive contamination, deposits or soap remainigs will stimulate the development of fungi.
A total absence of UV can cause a colour change of the sealant.
In an acid environment or in a dark room, white silicone can slightly turn yellow. Under the influence of sunlight it will turn back to its initial colour.
When finished with a finishing solution or soapy solution, make sure that the surfaces are not touched by this solution. This will cause the sealant not to adhere to that surface. Therefore we recommend to only dip the finishing tool in this solution.
We strongly recommend not to apply the product in full sunlight as it will dry very fast.
Do not use in applications where continuous water immersion is possible.
Do not use on polycarbonate. Use Silirub® AL2T instead.
We've added to your cart