The Platon Aqua Channel Universal End Cap / Outlet has been designed for two purposes:

As a 'Cap', it is designed to provide an end-stop at the ends of the Platon Aqua Channel.

As an 'Outlet', it is designed to convert the pentagonal shape of the Platon Aqua Channel into a round aperture. This enables water to be discharged from the Aqua Channel into a ‘P’ trapped gully or to a soakaway and is fitted to the end of a section of Aqua Channel. This then allows for a 1½" PVC pipe to be connected and then extended to the ‘P’ trapped gully or soakaway.

Description

Platon Aqua Channel End Cap / Outlet

The Platon Aqua Channel Universal End Cap / Outlet has been designed to either 'cap-off' the ends of the Platon Aqua Channel, or to provide an outlet for 40mm pipework to allow water to be discharged from the Channel to a ‘P’ trapped gully or to a soakaway.

Where gravity fed drainage is to be used, the Platon Aqua Channel Universal End Outlet has been designed to convert the pentagonal shape of the Aqua Channel into a round aperture.

This enables water to be discharged from the Aqua Channel into a ‘P’ trapped gully or to a soakaway and is fitted to the end of a section of Aqua Channel.

A blanking plate made from PVC with a 40mm diameter hole cut through, together with a PVC male coupling and straight connector at the end of the channel.

This then allows for a 1½" PVC pipe to be connected and then extended to the ‘P’ trapped gully or soakaway.

Note: The Platon Aqua Channel Universal End Outlet / Cap is supplied as a 'Cap' as standard. Simply push through the round 'stopper' in the centre to allow the piece to be used as an end outlet.

NB the Universal End Outlet should not be used to drain water from the Aqua Channel directly into foul drainage or into a stack pipe. This is because there is a risk of pungent smells emanating into the Aqua Channel peripheral drainage system.