Soudal Contractors PVCu Solvent Frame Cleaner

Health & Safety Recommendations

Work only in well-ventilated areas and keep away from sources of ignition—this cleaner is highly flammable. Wear gloves and goggles, avoid breathing vapours and prevent prolonged skin contact. If the product contacts skin, wash immediately with soap and water.

If swallowed, rinse the mouth with running water without ingesting the liquid and seek medical advice. Follow normal labour hygiene, keep containers tightly closed when not in use, and always read the packaging label and safety data sheet before starting. Store out of reach of children and dispose of wipes and empty containers responsibly.

Substrate Suitability

The cleaner is formulated for hard PVC and white PVCu components, including frames, sills, trims and cladding. It is also suitable for many items of rigid plastic garden furniture.

It is designed to remove ingrained dirt, grease, pencil and pen marks and traces of uncured sealant from white PVCu. Always carry out a small compatibility test on any unfamiliar substrate or finish (particularly coloured, foiled, coated or printed surfaces) to confirm that no dulling or staining occurs.

Surface Preparation

No special pre-treatment is required beyond basic housekeeping. Ensure the substrate is dry and free from loose dust and grit that could scratch the surface during wiping. Protect adjacent sensitive finishes where necessary. Use only clean, soft, colourfast cloths or quality paper tissue so you do not re-soil the surface while cleaning.

Application Method

Dampen a clean, soft, colourfast cloth or paper tissue with Soudal Contractors PVCu Cleaner and apply evenly to the surface, working the liquid well into the soiled area.

Allow the cleaner to rest for a few minutes so the solvent mixture can lift ingrained dirt and residues. Wipe away the loosened contamination, then immediately polish the area with a second dry, clean cloth or fresh tissue to achieve a clear, shiny, non-smear finish. Always wipe in one direction rather than rubbing back and forth; this avoids redepositing contamination and helps maintain an even sheen.

Replace cloths regularly as they become soiled to prevent re-contamination of the surface. Do not dilute the product. Use within the recommended temperature range of +5°C to +25°C.

Coverage

Coverage is dependent on the level of soiling, the porosity of the surface and the absorbency of the cloth. For best economy, apply sparingly to the cloth, not by pouring onto the frame, and renew the wiping face frequently so you are removing rather than spreading contamination.

Drying Time

The fluid consistency and solvent blend are fast acting and fast drying. After the short dwell described above, residues flash off within minutes and the cleaned surface can be handled or over-worked (for example, with further polishing) almost immediately. Where heavy deposits have been removed, repeat the process rather than over-wetting.

Limitations

Use only on suitable hard PVC/PVCu. Do not use on acrylic or polycarbonate glazing, rubberised trims, freshly painted surfaces or decorative foils without a successful compatibility test.

Avoid prolonged contact with gaskets and seals; if accidental contact occurs, wipe off immediately. Do not use near naked flames or hot surfaces. Do not smoke during use. Never dilute the product and never mix it with other cleaners.

Other Information

This cleaner is a colourless, fluid formulation based on a carefully balanced solvent mixture, with a density of 0.791g/cm³. For optimum performance it should be stored and used within a moderate temperature range, ideally between +5°C and +25°C. Supplied in 1L bottles, it will retain its properties for up to 24 months when kept unopened, upright and in a cool, dry place within that temperature band.

In practical use it provides a fast, trade-grade solution for professional uPVC window frame cleaning, delivering a non-smear finish and lifting marks from uncured sealant when used as a solvent PVCu cleaner; as with any specialist product, test on a small inconspicuous area before full application.

Q) What is Soudal Contractors PVCu Solvent Frame Cleaner and what does it do?

A) Soudal Contractors PVCu Solvent Frame Cleaner is a professional, ready-to-use liquid formulated specifically for cleaning and reviving white PVCu window and door frames, sills, trims and cladding. The carefully balanced solvent blend has a low viscosity that wets the surface quickly, penetrates ingrained dirt and greasy residues, and then evaporates cleanly to leave a bright, streak-free sheen. Unlike abrasive creams or scouring pads, it is non-abrasive and non-smearing, so it restores gloss rather than dulling it. It is particularly effective on common site contaminants such as pencil and pen lines, handprints, light road film and traces of uncured sealant that can be left after installation. Because it flashes off rapidly, you can clean long runs of frame without waiting for moisture to dissipate, making it ideal for end-of-job handovers and routine maintenance. The product is lightly perfumed for user comfort, intended for use between +5°C and +25°C, and is suitable for trade and facilities teams who need a fast, consistent finish on hard PVC/PVCu profiles and compatible rigid plastics.

Q) Which materials and surfaces can Soudal Contractors PVCu Solvent Frame Cleaner be used on?

A) The cleaner is purpose-designed for hard PVC and white PVCu components—frames, sashes, beads, sills, trims and cladding—found in modern fenestration systems. Its solvent blend is also useful on many other rigid plastics, for example plastic garden furniture, where environmental soiling and greasy films are common. Because the formulation is non-abrasive, it will not scour glossy plastics; instead it removes the fine film that scatters light and makes surfaces appear tired, restoring a crisp, uniform appearance. As with any solvent cleaner, compatibility depends on the substrate and surface finish. Always carry out a small patch test on any unfamiliar or sensitive surface—particularly foiled, coated, printed or coloured profiles—before proceeding across visible areas. Do not use on acrylic or polycarbonate glazing, on rubberised trims, or on freshly painted surfaces without a successful test. If in doubt, treat the product as a specialist PVCu frame cleaner first and prove suitability case by case on adjacent plastics to ensure there is no softening, whitening, streaking or loss of gloss.

Q) When should I use Soudal Contractors PVCu Solvent Frame Cleaner during an installation or maintenance programme?

A) The cleaner earns its keep at three key stages. First, during installation snagging, when you need to remove pencil layout marks, pen notations and smears of uncured sealant from beads and gaskets without leaving haze or streaks. Secondly, at practical completion or handover, when a fast, bright, non-smear wipe-down of frames, sills and trims is required to present a factory-fresh finish. Thirdly, in routine maintenance cycles for housing providers, letting agents and facilities teams, where regular light cleaning prevents build-up of road film and greasy handprints that otherwise take more time to shift. Because the product is ready-to-use and fast drying, it supports efficient workflows: wipe, polish, move on. Use within the recommended temperature range of +5°C to +25°C for best results, and always ventilate well—especially on enclosed landings or in tight stairwells. If the surface is heavily soiled with grit, dust or mud, dry-wipe first to avoid dragging abrasive particles that might scratch the plastic during solvent cleaning.

Q) How do I apply Soudal Contractors PVCu Solvent Frame Cleaner for a streak-free finish?

A) Application is straightforward: decant a small amount onto a clean, soft, lint-free cloth or quality paper tissue—apply to the cloth, not directly to the frame—and wipe the surface evenly to wet out the soiled area. Allow a short dwell so the low-viscosity solvent can lift ingrained grime, then remove loosened contamination with the same cloth, turning to a fresh, clean area as it loads. Immediately follow with a second dry, soft cloth to polish the surface and encourage an even, shiny finish as the solvent flashes off. Work in one direction rather than rubbing back and forth; this avoids redepositing lifted residues and helps maintain a uniform sheen. Replace cloths frequently so you are always removing rather than spreading contamination. On stubborn marks, repeat the cycle rather than over-wetting. Do not dilute the product, do not mix it with other cleaners and keep within the +5°C to +25°C temperature band. With the right cloth discipline you will achieve a bright, non-smear result at speed.

Q) Will Soudal Contractors PVCu Solvent Frame Cleaner remove pen lines, pencil marks and sealant smears?

A) Yes—lifting common on-site marking and residues is a core strength of Soudal Contractors PVCu Solvent Frame Cleaner. Pencil and pen lines typically release quickly because the solvent blend dissolves the binder in the mark and allows it to transfer to the cloth without scrubbing, which protects the gloss of the PVCu. It is equally effective on light traces of uncured sealant left from tooling or over-wipe, tidying beads and corners so the finished line looks crisp. For best results, apply the cleaner to the cloth, wipe gently with a short dwell, then polish off immediately with a clean, dry cloth. Important limitation: the cleaner is not a remover for fully cured silicone or hybrid sealants. If a bead has cured on the face of a frame, you will need to peel or mechanically lift it with appropriate plastic tools, then use the cleaner for final de-hazing. Always patch test around printed, foiled or coloured trims to confirm the mark lifts without affecting the finish.

Q) Is Soudal Contractors PVCu Solvent Frame Cleaner safe for coloured, foiled or coated PVC profiles?

A) Treat coloured, wood-grain foiled and factory-coated profiles with extra care. While many robust finishes tolerate solvent wipe-downs, others can soften, dull or show witness marks if exposed to aggressive cleaning or prolonged wetting. The correct approach is to conduct a small compatibility test on an inconspicuous area, following the exact method you intend to use, and then inspect in good light once fully dry. If no dulling, whitening or edge-lifting of the foil occurs, proceed cautiously in short passes, refreshing cloths frequently and avoiding excessive dwell. Never flood the surface and never allow solvent to track behind edges where adhesives reside. If the test reveals any change in sheen or colour, switch to a manufacturer-approved, non-solvent routine for that particular finish. As a rule of thumb, Soudal Contractors PVCu Solvent Frame Cleaner should be regarded as a specialist cleaner for white, rigid PVCu, with careful, tested use on other rigid plastics only when proven safe.

Q) What should I avoid when using Soudal Contractors PVCu Solvent Frame Cleaner to prevent damage?

A) Avoid four pitfalls. First, do not use the cleaner on acrylic or polycarbonate glazing—many transparent plastics craze or fog when exposed to solvents. Secondly, avoid prolonged contact with gaskets, rubber seals and soft plastics; if accidental contact occurs, wipe off immediately and allow to dry. Thirdly, do not use on freshly painted, printed, foiled or lacquered surfaces without a successful patch test, as some coatings can soften or mark. Finally, do not scrub with abrasive pads or powders alongside the cleaner—the product is non-abrasive by design, and adding abrasion risks turning a shiny frame matt. Never dilute or mix with other chemicals, and never spray near naked flames or hot surfaces. Keep away from ignition sources, do not smoke during use, and always ensure good ventilation. Using clean, colourfast cloths and working methodically in small sections will help you avoid runs, streaks and solvent pooling that could track into joints or seals.

Q) How fast does Soudal Contractors PVCu Solvent Frame Cleaner work and will it smear or leave residue?

A) The cleaner is fast acting and fast drying. Its low-viscosity solvent mixture wets out the surface rapidly, dissolves light grease and site grime, and then flashes off within minutes to leave a bright, streak-free finish. Provided you use clean, lint-free cloths and follow with a dry polish immediately after wiping, it will not smear and will not leave tacky residues that attract dust. On very stubborn deposits, two short wipe-and-polish passes are better than saturating the area—over-wetting can slow evaporation and encourage tide marks. Environmental conditions matter: work within +5°C to +25°C for best behaviour, and ventilate well so vapours disperse. In cooler or very still air, simply extend the dry-polish phase to assist evaporation. Because the product is non-abrasive, the glossy, factory-fresh look of white PVCu is preserved rather than scoured, which is especially valuable on wide, sunlit sills and cladding runs where smears would otherwise show.

Q) How much Soudal Contractors PVCu Solvent Frame Cleaner will I need and how can I maximise coverage?

A) Coverage depends on soiling level, cloth absorbency and user technique, but efficient methods go a long way. Apply sparingly to the cloth, not to the frame, and work in manageable sections—typically 300–600 mm at a time—so you can wipe, lift and dry-polish before the solvent fully flashes off. Turn or change cloths frequently; a fresh wiping face removes contamination rather than smearing it thinly, which reduces rework and saves product. For end-of-build clean-downs where construction dust and grit are present, dry-wipe first to remove loose debris and prevent scratching, then use the solvent cleaner to lift films and marks; this two-stage approach dramatically improves economy. On maintenance rounds, light, regular cleaning uses far less product than infrequent deep cleans. Because the cleaner evaporates quickly, open bottles only when needed, close between uses, and store correctly so losses to evaporation are minimised. With disciplined cloth management, a 1L bottle goes a surprisingly long way on typical housing stock.

Q) What safety precautions apply to Soudal Contractors PVCu Solvent Frame Cleaner on site?

A) The cleaner is highly flammable and should be treated with the same respect as other solvent-based maintenance fluids. Always work in well-ventilated areas, keep away from naked flames, sparks and hot surfaces, and do not smoke during use. Wear suitable gloves and eye protection to avoid skin and eye contact; if contact occurs, wash skin with soap and water and rinse eyes with clean water before seeking advice if irritation persists. Avoid breathing vapours—ventilation is your friend, especially in stairwells and small rooms. Use only clean, colourfast cloths and dispose of used wipes responsibly in accordance with local regulations. Never decant into unlabelled containers and keep the bottle tightly closed when not in use. Read the label and safety data guidance before starting, and ensure the working area is free of tripping hazards and open flames. As with any solvent product, keep out of reach of children and store securely to prevent accidental misuse.

Q) How should I store Soudal Contractors PVCu Solvent Frame Cleaner and what is the shelf life?

A) Store the cleaner upright in a cool, dry, well-ventilated place out of direct sunlight and away from sources of heat or ignition. Keep the cap tightly closed to limit evaporation and preserve the balance of the solvent mixture. Ideal storage and use temperatures fall between +5°C and +25°C. When kept sealed and stored correctly, the product typically retains its properties for up to 24 months; always check the packaging for batch-specific guidance. Do not decant into spray bottles unless they are solvent-resistant and appropriately labelled, and never store near oxidising agents or incompatible chemicals. If the product has been subjected to temperature extremes or looks contaminated, dispose of it responsibly rather than risking damage to finishes. Good storage discipline not only maintains cleaning performance and evaporation behaviour, it also reduces odour release in store cupboards and ensures the product remains safe and predictable when you need it.

Q) How does Soudal Contractors PVCu Solvent Frame Cleaner compare with abrasive creams or alcohol-only wipes?

A) Compared with abrasive cream cleaners, Soudal Contractors PVCu Solvent Frame Cleaner protects the gloss of PVCu profiles because it relies on solvent action rather than mechanical scouring to lift contamination. Creams can remove dirt but at the cost of micro-scratching that turns a high-gloss surface matt—particularly visible on sunlit sills and wide cladding. Compared with basic alcohol wipes, Soudal’s balanced solvent blend is more versatile on site grime, pen and pencil lines, and fresh sealant residues, yet still flashes off cleanly for a non-smear finish. Alcohol wipes often evaporate too quickly to penetrate heavier films and can leave patchy results on larger areas. The Soudal product also has practical trade advantages: a pleasant perfume for user comfort, a fluid consistency suited to cloth application, and a clear operating window of +5°C to +25°C. Used with the right cloth discipline and patch-testing on sensitive finishes, it provides professional, repeatable results on white PVCu frames and trims.

Technical Data Sheet

Safety Data Sheet

Coming Soon