Soudaflex 36FL - Premium Quality Polyurethane Floor Sealant

Soudaflex 36FL - Premium Quality Polyurethane Floor Sealant

Soudal | Polyurethane Sealant

Soudaflex 36FL is a Premium Quality, Chemical Resistant Polyurethane Based Floor Sealant.

Soudaflex 36FL has been developed especially for concrete floor applications and has excellent resistance to many fuels and other chemicals.

Soudaflex 36FL is for use in flooring expansion joints where high movement is expected.

Soudaflex 36FL conforms to DIN EN 14187-4, DIN EN 14187-5 and DIN EN 14187-6.

Supplied in 600ml Foil Pack Cartridges in Concrete Grey colour.

  Read our Blog about How to Seal Concrete Floor Joints with Soudaflex

Description

Soudaflex 36FL Premium Quality Polyurethane Floor Sealant

Soudaflex 36FL is a Premium Quality, Chemical Resistant Polyurethane Based Floor Sealant.

Soudaflex 36FL is for use in flooring expansion joints where high movement is expected, and for flooring joints where exposure to fuel and oil is expected, such as garages, forecourts etc.

Soudaflex 36FL has very good adhesion on many materials and has excellent resistance to many fuels and other chemicals.

Soudaflex 36FL was developed especially for concrete floor applications. There is no bubble formation within the sealant as a result of high temperatures or humidity.

Soudaflex 36FL is non-staining on Natural Stone and Concrete.

  Read our Blog about How to Seal Concrete Floor Joints with Soudaflex

Product Benefits:

  • Premium Quality Polyurethane Floor Sealant

  • Conforms to DIN EN 14187-4 (Determination of the Change in Mass and Volume After Immersion in Test Fuels and Liquid Chemicals)

  • Conforms to DIN EN 14187-5 (Determination of the Resistance to Hydrolysis)

  • Conforms to DIN EN 14187-6 (Determination of the Adhesion/cohesion Properties After Immersion in Test Fuels and Liquid Chemicals)

  • Excellent Chemical Resistance: Resistant to splash and spillage contact. Can withstand long term intense contact-immersion (up to 1 week) in combination with Soudal Primer 100.

  • Good Weather and UV Resistance.

  • Permanently Elastic After Curing

  • Very good Adhesion on many Materials

  • No Bubble Formation within sealant (in High Temperature and Humidity)

  • Non Staining on Porous Surfaces such as Marble, Granite and other Natural Stones

  • Supplied in 600ml Environmentally Friendly Foil-Pack Cartridges

  • Up to 95% LESS Wastage when using Foil Cartridges, easily disposable.

Typical Applications:

  • Sealing of shrinking joints in concrete floors.

  • Sealing of floor expansion joints where high movement is expected.

  • All usual horizontal building, connection, expansion and dilatation joints.

  • Excellent for sealing of joints in environments where fuel and oil contact occurs, such as Garages.

Standards & Certificates:

  • Tested and Conforms to DIN EN 14187-4: Change in mass and volume following storage in chemical liquids.

  • Tested and Conforms to DIN EN 14187-5: Resistance to hydrolysis.

  • Tested and Conforms to DIN EN 14187-6: Adhesion / cohesion properties following storage in chemical liquids.

  • Soudal Technical Bulletin No. 2017-WD0101 dd. April 6, 2017 regarding Chemical Resistance.

Application

Surface Preparation:

All surfaces should be clean, dry, free of dust and grease.

Apply Soudal Primer 100 on porous substrates. Always use Primer 100 on natural stone, no primer required on non-porous substrates. All smooth surfaces can be treated with Soudal Surface Activator.

There is no adhesion on glass, PE, PP, PTFE (Teflon®) and bituminous substrates.

We recommend a preliminary compatibility test.

Application Method:

  • Application Method: Apply using the Soudal Manual Foil Pack ApplicatorUse masking tape if necessary. Apply Soudaflex 36FL evenly without air inclusions into the joint. Remove masking tape before skin formation. Use the Soudaglatt Tool for tooling sealant if required. 

  • Cleaning: Clean with white spirit or Surface Cleaner immediately after use.

  • Repair: With the same material

Coverage:

Coverage of any sealant product varies depending on Joint Width and Joint Depth.

Please refer to our Guide on How To Measure The Number of Tubes Required For the Job.

Joint Dimensions:

  • Minimum Width for Joints: 5 mm

  • Maximum Width for Joints: 30 mm

  • Minimum Depth for Joints: 5 mm

  • Recommendation Sealing Jobs: Joint Depth = 0.8 x Joint Width.

Remarks:

  • When painted with oxidative drying paints disturbances in the drying of the paint may occur (we recommend to do a compatibility test before application).

  • Soudaflex 36FL has a good UV resistance but can discolour under extreme conditions or after very long UV exposure.

  • Chemical resistance strongly depends on concentration, temperature and exposure time. Some chemicals may lead to a change in volume, mechanical properties or the visual aspect of the sealant.

  • It is recommended to do a compatibility test prior to application.

  • Contact with bitumen, tar or other plasticizer releasing materials such as EPDM, neoprene, butyl, etc. is to be avoided since it can give rise to discolouration and loss of adhesion.

  • Do not apply or allow to cure in the presence of uncured silicone sealants, alcohol - or other solvent cleaners.

  • When using different reactive joint sealants, the first joint sealant must be completely hardened before the next one is applied.

Data Sheets

Technical Data Sheet

Declaration of Performance (DoP)

Safety Data Sheet

Coming Soon

More on this product... View Delivery Rates

Concrete Grey

£6.50 ex. VAT | £7.80 inc. VAT

  • Reviews

Related Items

  • £6.50 ex. VAT | £7.80 inc. VAT
  • Delivery Rates

    Delivery To... Under £50 ex. VAT £50 or over ex. VAT
    UK Mainland £3.75 FREE
    Scottish Islands £23.75 £20.00
    Northern Ireland £20.00 £20.00
    Isle of Wight £13.25 £9.50
    Republic of Ireland POA POA
    Scilly Isles POA POA
    Isle of Man POA POA