Nuaire Group | Positive Input Ventilation (PIV)
The Nuaire Flatmaster offers a low-cost, whole home ventilation solution for homes without lofts.
The Nuaire Flatmaster is supported by BBA Certification Certificate No: 00/3727.
Cure condensation dampness and remove allergens and pollutants from the home with the low-energy ventilation system, from the inventors of PIV.
Based on the popular and low-energy Positive Input Ventilation principle which Nuaire invented in 1972, the Nuaire Flatmaster has been specifically designed to ventilate flats and other homes without lofts. The system introduces air into the home at a continuous low rate, eliminating condensation dampness and forcing out indoor pollutants such as Radon gas and carbon monoxide. Allergens are kept to a minimum and outdoor pollutants such as pollen and traffic fumes are kept out. The results are a fresh and healthy indoor environment.
The aesthetically pleasing and compact Nuaire Flatmaster unit is usually situated in a convenient location, such as a kitchen cupboard or hallway, and is ducted to a central location. Multi-positional spigots allow for quicker installation with only one external wall penetration.
Cures Condensation Dampness - PIV removes humidity from the air, preventing mould growth and controlling dust-mite allergens.
Improves Indoor Air Quality - Indoor pollutants from cooking and cleaning are removed while outdoor pollutants including traffic fumes, pollen and Radon gas are kept out.
Meets Regulations - Meets Part F & L of Building Regulations as a low-energy ventilation strategy.
Extremely Low Power Consumption - As low as 3 watts.
Easy Installation and Very Low Maintenance - Filter clean or replacement every 18 months
5 Year Warranty - 1 year parts and labour, remaining years parts only.
The unit is designed to take fresh air from outside, filter the air and discharge it into the central hallway via a system of ducting. The unit is usually situated in a kitchen, airing cupboard or hallway, and is ducted to a central location. The interchangeable, multi-positional inlet/outlet spigots allow for quicker installation with only one external wall penetration.
The dwelling internal air discharge grille is usually installed at high level in a central location within the hallway, although discharging the air down the length of the hallway (away from the front door) should also prove acceptable.
Unit performance may be enhanced if an existing heat source can warm the discharged air, for example, by locating the discharge grille above a radiator.
We've added to your cart