Platinum Building Chemicals Ltd | Woodworm Treatment
WoodGuard Insecticide is a very effective Concentrated Woodworm Treatment used for the eradication and prevention of Woodworm and other wood boring insects. WoodGuard Insecticide Woodworm Treatment dilutes with water to make up to 25 Litres of Ready-to-use product.
Supplied in 250ml Containers, Concentrated Solution.
WoodGuard Insecticide Woodworm Treatment carries the HSE Approval No 10641.
Read our Guide on 'How to Treat Woodworm & Wood Boring Insects'
WoodGuard Insecticide is a Woodworm Treatment supplied as a 250g concentrate which requires dilution with water to form a ready to use product.
The formulation of WoodGuard Insecticide is based on micro-emulsion technology to achieve the desired effect in a non solvent and VOC free based system.
The active ingredients of WoodGuard Insecticide are designed to give the maximum spectrum of biological activity against a wide range of wood boring insects (specifically woodworm) including their larvae.
WoodGuard Insecticide provides rapid absorption into the timber giving high levels of penetration.
WoodGuard Insecticide has virtually no odour and can be applied either by brush or low pressure spray to give long lasting protection.
Dilutes to make up to 25 litres of Ready-to-use Product
Eradicates Wood Boring Insects
Prevents Re-infestation
Microemulsion Water Based Formula
Virtually No Odour
Has an HSE Statutory 1-hour Re-entry Time
Non Flammable
Permethrin 20.0% w/w: The insecticide is effective against all life stages of wood boring insects whilst the surfactant system used in the formulation promotes rapid absorption and deep penetration into timber.
Take the usual labour hygiene into account.
PPE should be worn during application. See our Safety & PPE Products.
Consult label and material safety data sheet for more information.
Wood should be clean and free from wood dust and other contaminants.
Apply by Brush or Low Pressure Spray.
Apply at 250 - 333ml/m² (1L per 3 - 4m²) once diluted.
Woodguard Insecticide has a HSE statutory 1-hour re-entry time.
Product does not have a finish and leaves the same effect as applying water or solvent. It is always advisable to try on a small inconspicuous area before application to ensure product finish is as expected.
Product is stable in original packaging for 2 years when stored under ambient conditions. After 2 years product should be re-tested every 6 months to ensure active ingredient levels are within specification.
We've added to your cart
01355 222 777