WoodGuard Dual Fungicide & Insecticide is a very effective Concentrated Woodworm & Timber Rot Treatment used for the eradication and prevention of Woodworm (and other wood boring insects) and Wood Rotting Fungi (Dry Rot and Wet Rot).

WoodGuard Dual Fungicide & Insecticide should only be used on Timbers. For an effective Dry Rot Treatment on Masonry substrates, see Platinum Masonry Biocide.

WoodGuard Dual Fungicide & Insecticide dilutes with water to make up to 25 Litres of Ready-to-use product.

Supplied in 500ml Containers, Concentrated Solution.

  WoodGuard Dual Fungicide & Insecticide carries the HSE Approval No 10640.

  Read our Guides on 'How to Treat Woodworm & Wood Boring Insects' and 'How to Identify & Treat Dry Rot and Wet Rot on Timbers'

Description

WoodGuard Dual Fungicide & Insecticide - Woodworm & Timber Rot Treatment

WoodGuard Dual Fungicide & Insecticide is a Dual Woodworm & Dry Rot Timber Treatment supplied as a 500g concentrate which requires dilution with water to form a ready to use product.

The formulation of WoodGuard Dual Fungicide / Insecticide is based on micro-emulsion technology to achieve the desired effect in a non solvent and VOC free based system.

The active ingredients of WoodGuard Dual Fungicide / Insecticide are designed to give the maximum spectrum of biological activity against a wide range of wood rotting fungi and wood boring insects (specifically woodworm) including their larvae.

WoodGuard Dual Fungicide / Insecticide provides rapid absorption into the timber giving high levels of penetration. It has virtually no odour and can be applied either by brush or low pressure spray to give long lasting protection.

  Read our Guides on 'How to Treat Woodworm & Wood Boring Insects' and 'How to Identify & Treat Dry Rot and Wet Rot on Timbers'

Product Benefits:

• Dilutes to make up to 25 litres of Ready-to-use Product

• Eradicates Wood Boring Insects and Wood Rotting Fungi

• Prevents Re-infestation

• Microemulsion Water Based Formula

• Virtually No Odour

• Has an HSE Statutory 1-hour Re-entry Time

• Non Flammable

Active Ingredients:

Permethrin

Permethrin 10.0% w/w: The insecticide is effective against all life stages of wood boring insects whilst the surfactant system used in the formulation promotes rapid absorption and deep penetration into timber.

Propiconazole

Propiconazole 10.0% w/w: A Triazole Fungicide which has excellent efficacy against a range of wood destroying fungi.

IPBC (3-Iodo-2-Propynyl Butyl Carbamate)

IPBC (3-Iodo-2-Propynyl Butyl Carbamate) 10.0% w/w: A Carbamate Fungicide which is added to improve the efficacy envelope even further providing excellent efficacy against a range of wood staining fungi.

Application

Health & Safety Recommendations:

Take the usual labour hygiene into account.

PPE should be worn during application. See our Safety & PPE Products.

Consult label and material safety data sheet for more information.

Preparation:

Wood should be clean and free from wood dust and other contaminants.

Application Method:

Apply by Brush or Low Pressure Spray.

Coverage:

Apply at 250 - 333ml/m² (1L per 3 - 4m²) once diluted.

Re-Entry Time:

WoodGuard Dual Fungicide & Insecticide has a HSE statutory 1-hour re-entry time.

Finish:

Product does not have a finish and leaves the same effect as applying water or solvent. It is always advisable to try on a small inconspicuous area before application to ensure product finish is as expected.

Stability:

Product is stable in original packaging for 2 years when stored under ambient conditions. After 2 years product should be re-tested every 6 months to ensure active ingredient levels are within specification.

Data Sheets

Technical Data Sheet

Safety Data Sheet