Soudal | Expanding Foam
Soudafoam Gun & Foam Cleaner is an aerosol applied, solvent based Polyurethane Foam Cleaner used mainly for the cleaning of PU Foam Applicator Guns.
Gun applied PU Foam valves and uncured PU Foam can also be quickly and easily removed with the attachable spray nozzle.
Used in conjunction with Foam Applicators as cleaning fluid
Attachable spray nozzle allows for cleaning uncured spilt Polyurethane Foam.
Attach the Soudafoam red spray nozzle onto the valve and spray the cleaner towards the uncured foam. The foam will dissolve and can be wiped away using a cloth.
Please perform a compatibility test with all substrates as the cleaner is solvent based and may affect some materials adversely.
Remove the Soudafoam Expanding Foam cannister from the applicator by screwing anti-clockwise.
Use the cleaner as an aerosol spray to clean the exterior of the gun, the valve and the tip. Pull the trigger on the gun to de-pressurise the gun (please note, some foam may be extruded).
Spray the cleaner onto the adaptor ring to clean off the remainder of the uncured foam. Remove the red spray nozzle and screw the cleaner onto the gun turning clockwise until tight. Turn upside down and pull the trigger of the gun for a few seconds, let the cleaner activate inside the gun for a few minutes, then pull the trigger again for a few seconds.
Repeat the spraying and activating periods until only the clear solvent cleaner is visibly dispensed.
Take the usual labour hygiene into account.
Apply only in well ventilated areas. Always wear gloves and goggles during application. See our Safety & PPE Products.
Consult label and material safety data sheet for more information.
We've added to your cart