Soudal | Expanding Foam
Soudal Gap Filler Expanding Foam is a moisture curing polyurethane expanding foam which is used for all general purpose gap filling.
Supplied in 600ml Genius Gun® (Hand Held) Cannisters.
Soudal Gap Filler Expanding Foam is a moisture curing polyurethane expanding foam which is used for all general purpose gap filling. Soudal Gap Filler Expanding Foam adheres to most common building materials and is resistant to water, heat and ageing.
Soudal Gap Filler Expanding Foam has excellent thermal and acoustic insulation values. It can be cut, sanded, painted or plastered after full cure.
Soudal Gap Filler Expanding Foam is not UV Resistant, therefore the product must be covered with a sealant, paint or plaster once cured.
This product utilises the Genius Gun®.
The Genius Gun® is the ideal application system for PU Expanding Foams that do not require an applicator gun, offering ease of use and maximum performance.
The combination of professional quality products with easy usability is an ideal solution.
Video Credits: Soudal Australia TV
Excellent adhesion on most substrates (except PTFE, PE and PP).
High insulation value, thermal and acoustic.
High gap filling yield.
Very good bonding properties.
Elastic and compressible.
All foam applications in static and not static joints.
Filling of cavities.
Sealing of all openings in roof constructions.
Apply of a sound absorbing layer.
Improving thermal isolation in cooling systems.
Product Basis: Polyurethane Expanding Foam Filler
Box Yield FEICA TM1003 (600ml Genius Gun Cannister): Approx 22 Litres
Joint Yield FEICA TM1002 (600ml Genius Gun Cannister): Approx 14 Metres.
Acoustic Rating ISO 717-1: 58 dB
Thermal Conductivity DIN 52612: 37mW/mK
Fire Class (EN 13501-1): No Fire Classification
Application Temperatures: +5°C to +30°C
Shake the aerosol can for at least 20 seconds. Open the cover and unfold the tube horizontally.
Moisten surfaces with a water sprayer prior to application.
For non-conventional substrates a preliminary adhesion test is recommended.
Fill holes and cavities approximately ⅓ full as the foam will expand.
Repeat shaking regularly during application.
If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foam Cleaner or acetone.
Cured foam can only be removed mechanically or with Cured PU Foam Remover. Never burn away cured foam.
Take the usual labour hygiene into account.
Always wear gloves and goggles during application. See our Safety & PPE Products.
DO NOT use expanding foam on areas near to electrical boxes or ceiling lights. Take care if you have a history of conditions where breathing may become difficult.
Consult label and material safety data sheet for more information.
We've added to your cart