Categories

Platinum Mould Eradication Kit

Platinum Mould Eradication Kit
Brand: Platinum Building Chemicals Ltd
Product Code: AC25
Availability: In Stock
Price: £19.50   ex vat

4 or more £18.25
Qty:     - OR -   Add to Wish List
Add to Compare

Product Description:


The Platinum Mould Eradication Kit is designed to kill mould growth on walls, ceilings, window reveals, frames, doors, skirting boards etc.


Kit Contents:


** MCS1 & MCS3 ARE ALL APPROVED FOR BOTH AMATEUR AND PROFESSIONAL USERS.


Application:


Stage 1 - Spray
Spray MCS1 Mould Clear Solution onto the affected surface from a distance of 3-5cm. Treat visible mould PLUS 1 metre beyond. Repeat the treatment on badly affected areas after 10-15 minutes.

Areas to be treated:

  • Painted and Timber Areas - Spray the area thoroughly with the MCS1 Mould Clear Solution.
  • Papered Areas - Spray the paper. The MCS1 Mould Clear Solution acts as a biocide and stripping agent. Bag the mould contaminated paper and remove from the property. Treat the exposed plaster with a thorough spraying of MCS1 Mould Clear Solution.
  • General Preparation - Once the surface is dry, scrape off any loose flaking paint and rub down. Previously painted surfaces must be etched using sandpaper.
  • Coverage - The solution should cover approximately 12.5m².

 

Stage 2 - Wipe
Rub the surface using the sponge provided. Allow approximately 30 minutes for the product to work, then rinse with warm soapy water. Repeat the treatment if necessary.

Stage 3 - Paint Additive
MCS3 Paint Additive is specially formulated to protect decorative finishes from future mould attack. This should be mixed into emulsion paint, primer, undercoat, varnish, gloss, wallpaper paste, textured paint or tile adhesive.

Add 100ml of MCS3 Paint Additive to 5L of water based paint (emulsion, vinyl, silk or matt).

Add 50ml of MCS3 Paint Additive to 5L of solvent based paint (primer, undercoat or gloss).

Blend the Paint Additive for at least 1 minute or until fully dispersed. Apply the paint in accordance with the manufacturers instructions.

Important - Condensation is usually increasingly the main cause of mould. To reduce this underlying problem, ensure adequate ventilation throughout the property. In very extreme cases of mould other remedial measures may be required.


Formulation:


MCS1 Mould Clear Solution (Ready to Use) - Contains: Benzalkonium Chloride 0.95% w/w, 2-phenylphenol 0.24% w/w.

MCS3 Paint Additive - Contains: 3-Iodo-2-Propynyl-n-Butyl Carbamate 14.85% w/w (148.6 g/l).


Product Data Sheet:


Technical Data Sheet
MCS1 Safety Data Sheet
MCS3 Safety Data Sheet


Other Information:


MCS1 Mould Clear Solution (Ready to Use) carries the HSE Approval No 9453.

MCS3 Paint Additive carries the HSE Approval No 7656.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: