At Platinum Chemicals we stock a range of Newton Mortars and Floor Coatings.
Newton HydroSeal 203-RM is a cement-based mortar suitable for where a high depth of repair or levelling to concrete is required.
It's an essential ancillary in the installation of effective waterproofing. For example, HydroSeal 203-RM has been instrumental in a wide range of waterproofing projects. Mostly used for durable repairs to concrete structures, it can also be used to repair bridges, floors, footpaths, roads, runways, and decks.
Mortars such as this are also regularly used for concrete levelling where a completely flat and uniform surface is required quickly. With the addition of water, they create a rapid-curing mortar which will set quickly and be safe for foot traffic within hours.
Newton HydroSeal 203-RM is a single component, fast setting mortar. It is polymer modified and fibre reinforced with a high adhesion and compressive strength. The mortar can be installed up to 100mm deep, or it can be mixed with sharp sand to create a screed with a maximum depth of 300mm.
Overall, HydroSeal 203-RM provides the following Benefits:
Strong and durable even at sub-zero temperatures.
High bond strength greater than concrete.
Sets in 10 minutes for quick application.
Resistant to 10 bar water pressure.
Non-toxic when cured and suitable for use in reservoirs or other drinking water containment areas.
Resistant to acid gases, chloride ions, and sulphates.
NewCoat 701-HB is a two-component solvent-free epoxy resin based floor coating developed to provide protective and decorative properties to concrete, steel and other substrates.
After mixing together, an easily applied chemical and abrasion-resistant finish is produced.
John Newton & Co. Ltd | Rapid Repair Mortar
We've added to your cart