Newton® 603 Flooring Membrane (3mm Stud)

Newton® 603 Flooring Membrane (3mm Stud)

John Newton & Co. Ltd | Damp Proofing

Damp Proofing Membranes Flooring Membranes Newton 603

Newton® 603 is a high quality flooring membrane suitable for use above new and existing floors. The 3mm studs allow for pressure equalisation of dampness within the floor below, allowing for dissipation at the room perimeter and subsequent drying of the floor.

The studs also give slight compression to footfall, making the floor very responsive, comfortable and ideal as the floor membrane for performance sports floors.

Newton® 603 uncouples the floor finish from the substrate so that movement is not transferred to the floor finish above.

The membrane also bridges small cracks, allowing for quick floor installation above less than ideal substrate.

Newton® 603 is guaranteed against deterioration for 30 years, and has a life expectancy of at least 50 years (DIN 9001:2000) and is inert with high compressive loading stability. It is highly resistant to water, alkalies, saline solutions and organic acids, and it is not affected by minerals. It is also resistant to bacteria, fungi and other small organisms.

Newton® 603 can be finished over with screed, 18mm or 22mm T&G chipboard or partical board. Laminate and timber flooring should be installed over a layer of 18mm or 22mm T&G chipboard

Available in Roll sizes ranging from 20M² to 40M².

Applications
  • As a damp proof flooring membrane

  • As the membrane of choice for performance sports floors

  • As the damp proof floor membrane for use with Damp Proofing Wall Membranes (Newton® 803 Newtonite, Newton® 805 Newlath)

  • Can be used as the flooring membrane within a Basement Waterproofing specification if specified by a trained waterproofing surveyor

Benefits
  • Does not transfer substrate movement to the floor finish above

  • Has a high compressive loading stability

  • Slight compression under footfall makes it ideal for installation as the floor membrane for performance sports floors

  • Inert and highly resistant to water, alkalies, hydrocarbons, saline solutions and organic acids

  • Not affected by minerals, and resistant to bacteria, fungi and other small organisms

Technical Data
Membrane Material High Density Polypropylene (HDPP)
Stud Height Approx 2.4mm
Construction Height Approx 2.93mm
Unit Weight 0.500 kg/m²
Working Temperature -40°C to +80°C
Softening Temperature +126°C
Compressive Strength - Temporary Loading (EN ISO 25619-2) >320 kPa
Compressive Strength - Permanent Loading (EN ISO 25619-1) 100 kPa
Thermal Conductivity (EN 12667) 0.461 W/mK
Water Vapour Diffusion Resistance -Sd Value (BS EN 1931) >604m
Water Vapour Diffusion Resistance - µ Value >1208000 µ
Water Vapour Diffusion Resistance >3020 MNs/g
Resistance to Fire (BS EN 13501-1) Euroclass E
Chemical Resistance - Excellent (EN 14030) 100%
Oxidation Resistance - Excellent (EN ISO 13438) 100%

 

Data Sheets

Technical Data Sheet

More on this product...

£170.00 ex. VAT | £204.00 inc. VAT

  • Reviews