Next Day Delivery
Available on most mainland UK orders
Free Help & Advice
Call 01355 222 777
Mon.-Fri 8:30am - 4:15pm, or email us
Same Day Despatch
On in-stock orders placed before 14:00
Great Service
A proudly independent family business with 40 years experience
Everbuild EuroScrim - Plasterers Scrim Tape
Quick and easy to apply, Everbuild EuroScrim is made in Europe, to perform!
Everbuild EuroScrim is made with a high tack adhesive and an open mesh that will not blister or bubble
Product Uses:
-
For jointing dry walling.
-
For repairing / jointing over large cracks in plaster.
-
Repairing / jointing in ceiling work.
Benefits:
-
Quick and easy to apply.
-
Self adhesive - eliminates the need for pre-plastering.
-
Flexible - will not bubble or blister.
Application Method:
All surfaces must be clean, dry, sound and free from oil, grease and dust.
Place tape into position and apply directly to joint or crack pressing down firmly to ensure good adhesion.
For crack and hole repairs, the tape must be extended at least 25mm from the edge of the area to be repaired, butting (never overlapping) the tape.
Once the tape is in position, cover with jointing compound or plaster, ensuring the plaster or jointing compound penetrates the tape to achieve optimum adhesion.
Limitations:
-
Ensure surfaces are completely clean before applying tape.
-
Never overlap the tape, always butt the joint.
-
When applying jointing compound or plaster, ensure complete penetration through the tape to achieve optimum adhesion.
Everbuild EuroScrim - Plasterers Scrim Tape
Quick and easy to apply, Everbuild EuroScrim is made in Europe, to perform!
Everbuild EuroScrim is made with a high tack adhesive and an open mesh that will not blister or bubble
Product Uses:
-
For jointing dry walling.
-
For repairing / jointing over large cracks in plaster.
-
Repairing / jointing in ceiling work.
Benefits:
-
Quick and easy to apply.
-
Self adhesive - eliminates the need for pre-plastering.
-
Flexible - will not bubble or blister.
Application Method:
All surfaces must be clean, dry, sound and free from oil, grease and dust.
Place tape into position and apply directly to joint or crack pressing down firmly to ensure good adhesion.
For crack and hole repairs, the tape must be extended at least 25mm from the edge of the area to be repaired, butting (never overlapping) the tape.
Once the tape is in position, cover with jointing compound or plaster, ensuring the plaster or jointing compound penetrates the tape to achieve optimum adhesion.
Limitations:
-
Ensure surfaces are completely clean before applying tape.
-
Never overlap the tape, always butt the joint.
-
When applying jointing compound or plaster, ensure complete penetration through the tape to achieve optimum adhesion.
You Might Also Like
- Choosing a selection results in a full page refresh.
