Soudal | Hybrid Polymer Sealant
Soudal Soudaseal Cleanroom is a Premium Quality, Totally Neutral, Anti-Mould, Hybrid Polymer Cleanroom Sealant and Adhesive, used for the sealing and bonding of areas in critical surroundings (i.e Hospitals, Laboratories, Pharmaceutical Industry, Computer Areas etc).
Soudal Soudaseal Cleanroom can also be used for sealing in Environments where Food is Handled and Stored, such as Food Containers and Cold Store Installations etc.
Supplied in 290ml Cartridges, available in White colour only.
Soudal Soudaseal Cleanroom is a Premium Quality, Mould Resistant, Hybrid Polymer Cleanroom Sealant and Adhesive.
Soudal Soudaseal Cleanroom has outstanding bond strength and mechanical properties on nearly all surfaces.
Soudal Soudaseal Cleanroom extrudes easily, even at low temperatures, it is colour stable, UV Resistant and contains no isocyanates, solvents, halogens or acids.
Soudal Soudaseal Cleanroom can be painted over with all water based paints and does NOT cause any staining on porous materials such as natural stone, granite, marble etc.
Hybrid Polymer Sealant and Adhesive
Tested in accordance to FDA Regulations CFR 21 & 177.2600 (e)
Stays elastic after curing and very sustainable
Excellent adhesion on nearly all surfaces, even if slightly moist.
Can be Painted with Water Based Paints.
Very Low Emmission, EC1 PLUS R Certified
Impervious to Mould, Contains 'XS1' Fungicide (Strongest Fungicide available)
Completely Neutral, does not contain Solvents, Isocyanates, Acids, Halogens or Toxic Components.
Good Colour Stability, Weather and UV Resistance
Specialist Sealing and Bonding Applications in Critical Surroundings (i.e Hospitals, Laboratories, Pharmaceutical Industry, Computer Areas etc).
Sealing and Bonding in Food Safe Applications.
Sealing in Environments where Food is Handled and Stored (i.e Food Containers, Cold Store Installations, Food Industries etc.).
IKI (Institute für Krankenhaushygiene, Giessen, Germany) approvals for Desinfection and barrier against microorganisms (on Trespa Meteon panels).
Institut für Lufthygiene-Berlin: Insensitive to mould and bacteria according to ISO / DIN EN 846.
Tested and in accordance with FDA regulation code CFR 21 paragraph. 177.2600 for repeated use in contact with aqueous foods.
All smooth surfaces can be treated with Soudal Surface Activator. Porous surfaces in water loaded applications should be primed with Soudal Primer 150.
We recommend a preliminary adhesion test on every surface.
Soudaseal Cleanroom has an excellent adhesion on most common substrates, such as the usual building substrates, natural stone, treated wood, PVC and other plastics.
Soudaseal Cleanroom has been tested on the following Metal Surfaces: Steel, AlMgSi1, Brass, Electrolytic Galvanised Steel, AlCuMg1, Flame Galvanised Steel, AlMg3 and Steel ST1403.
Soudaseal Cleanroom also has a good adhesion on the following Plastic Surfaces: Polystyrene, Polycarbonate (Makrolon®), PVC, ABS, Polyamide, PMMA, Fiberglass Reinforced Epoxy and Polyester.
While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used, these should be removed prior to bonding.
For optimum adhesion the use of Surface Activator is recommended.
Note: Bonding plastics like PMMA (e.g. Plexi® Glass), Polycarbonate (e.g. Makrolon® or Lexan®) in stress loaded applications can give rise to stress cracking and crazing in these substrates. The use of Soudaseal Cleanroom is not recommended in these applications.
There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.
Application Method: With manual or pneumatic caulking gun.
Cleaning: Clean with white spirit or Surface Cleaner immediately after use.
Finishing: With a soapy solution before skinning.
Repair: With the same material
Minimum Width for Bonding: 2 mm
Maximum Width for Bonding: 10 mm
Minimum Width for Joints: 5 mm
Maximum Width for Joints: 30 mm
Minimum Depth for Joints: 5 mm
Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth.
Soudaseal Cleanroom may be overpainted with water based paints, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application.
The drying time of alkyd resin based paints may increase.
Soudaseal Cleanroom can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we recommend preliminary compatibility test.
Soudaseal Cleanroom can not be used as a glazing sealant.
Not suitable for bonding aquariums.
Soudaseal Cleanroom can be used for adhering of and sealing on natural stone.
When applying, make sure not to spill any sealant on the surface of materials.
The sanitary formula should not replace regular cleaning of the joint. Excessive contamination, deposits or soap remainings will stimulate the development of fungi.
A total absence of UV can cause a colour change of the sealant.
We've added to your cart