Soudal T REX - Solvent Free

Soudal T REX - Solvent Free

Soudal | Grab Adhesive

Soudal T REX Solvent Free is an Super Strength, Fibre Reinforced, Solvent Free Grab Adhesive with very low emission values (EC-1R Plus label). Soudal T REX Solvent Free has excellent adhesion on a wide range of construction materials both in interior and exterior applications.

Soudal T REX - Solvent Free is especially suited for use when bonding porous materials compared to any Solvent Based Grab Adhesive.

Supplied in 310ml Cartridges.

Description

Soudal T REX Solvent Free

Soudal T REX - Solvent Free is an ultra-strong, gap filling grab adhesive with extremely high initial grab (>300kg/m²) using Soudals unique 'Fibre Reinforced Technology' which improves strength and gap filling properties.

Soudal T REX - Solvent Free is especially suited for use on porous materials in comparison to any Solvent Based Grab Adhesive.

Soudal T REX - Solvent Free is suitable for all types of bonding, interior and exterior, vertical and horizontal, overhead (with support where necessary) and uneven surfaces.

Product Benefits:

  • Fibre Reinforced

  • Initial Grab - Higher than 300kg/m²

  • EC-1R Plus label: Very low emission values

  • Solvent-Free

  • Suitable for bonding on uneven surfaces

  • Direct application onto one substrate

  • Excellent adhesion on a wide range of construction materials both in interior and exterior applications

Typical Applications:

  • Suitable for immediate and rock solid bonding of many materials such as wood, many plastics, bricks, stone, tiles, metal to porous surfaces such as concrete, plaster, MDF, OSB, timber panels, chipboard etc.

  • Suitable for the bonding of decorative materials, skirting boards, gypsum panels in vertical, horizontal and overhead applications.

Application

Surface Preparation:

Surfaces should be clean, dry, free of dust and loose particles.

At least one of the substrates should be porous otherwise the curing rate will be significantly slower.

Application Method:

Apply the adhesive by means of a caulking gun onto one surface in beads or dabs (every 15cm for panels).

Always apply adhesive to the edges and corners of panels.

Press the surfaces together immediately and tamp down with a rubber hammer.

Support may be required. The bond can be loaded after 24-48 hours.

Remarks:

  • When bonding, the pressure applied determines the initial grab and the final bonding strength. The duration during which pressure is applied is less important.

  • Do not use as a mirror adhesive (Use Soudaseal Mirror).

  • Do not use in applications where continuous immersion is possible.

Data Sheets

Technical Data Sheet

Soudal T REX Leaflet

Safety Data Sheet

More on this product... View Delivery Rates

White

£1.75 ex. VAT | £2.10 inc. VAT

  • Reviews

  • Customer Reviews

    Based on 1 review Write a review

Related Items

  • £1.75 ex. VAT | £2.10 inc. VAT
  • Delivery Rates

    Delivery To... Under £50 ex. VAT £50 or over ex. VAT
    UK Mainland £3.75 FREE
    Scottish Islands £23.75 £20.00
    Northern Ireland £20.00 £20.00
    Isle of Wight £13.25 £9.50
    Republic of Ireland POA POA
    Scilly Isles POA POA
    Isle of Man POA POA