Soudal | Silicone Sealant
Soudal Stay Fresh is the ULTIMATE Anti-Mould and Food Safe Silicone Sealant.
Soudal Stay Fresh is a Thick-bodied, 100% Neutral Cure Silicone that contains powerful anti-fungicidal and anti-biocidal agents. It is virtually odourless and has a very fast skinning time and final cure.
Soudal Stay Fresh has primerless adhesion on all sanitary materials, including plastics.
Soudal Stay Fresh is highly elastic and is resistant to UV, rain, snow, ozone and many chemicals. High and low temperature resistant.
Dual Action - Includes a powerful dual action fungicide and biocide, but is safe enough to use in food preparation areas.
Low Odour - Unlike traditional sealants it does not smell of vinegar, doesn’t contain or release acids and is compatible with all plumbing materials including copper piping.
Low Emissions - Stay Fresh is classified as a low emission product, rated A+ Indoor Emission Level and EC1plus under GEV-EMICODE.
Solvent Free - Contains no volatile solvents and does not shrink after use.
Lifetime Guarantee against Black Mould Growth
For sealing shower bases and cubicles, sealing around baths, wet rooms, sinks, basins and any other sanitaryware.
For use in kitchens, utility rooms and all areas of high humidity.
Can be used to seal door and window frames internally in areas subject to high condensation.
Surfaces should be clean, dry, free of dust and grease.
Porous surfaces in water loaded applications should be primed with Soudal Primer 150. No primer needed for non-porous substrates.
There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.
Application Method: With a manual or pneumatic caulking gun.
Cleaning: Clean with a Surface Cleaner immediately after use.
Finishing: With a soapy solution or Soudal Finishing Solution before skinning.
Repair: With the same material
Minimum Width for Joints: 5 mm
Maximum Width for Joints: 30 mm
Minimum Depth for Joints: 5 mm
Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth.
Do not use on natural stones like marble, granite etc. as it may cause staining.
Direct contact with the secondary sealing of insulating glass units (insulation) and the PVB-film of safety glass must be avoided.
Do not use on polycarbonate. Use Silirub® AL2T instead.
The sanitary formula should not replace regular cleaning of the joint. Excessive contamination, deposits or soap remainings will stimulate the development of fungi.
We've added to your cart