Soudal | Contact Adhesive
Soudal 270 SP is a Professional Quality Spray Contact Adhesive in aerosol format, based on synthetic rubbers and resins.
Soudal 270 SP Spray Contact Adhesive is suitable for a wide range of applications including bonding of most common materials such as rubber, cardboard, textiles, felts, leather, artificial leather, cork and plastics. This product does not contain toluene or methylene chloride.
Supplied in 500ml Aerosol Cans, and is Transparent in colour.
Soudal 270 SP is a Professional Quality, Ready to Use, Sprayable Contact Adhesive in aerosol format, based on synthetic rubbers and resins.
Soudal 270 SP Spray Contact Adhesive has a high bond strength and fast drying process with fast strength build up.
Suitable for a wide range of applications, Soudal 270 SP has excellent adhesion to many materials and has a low consumption rate.
Soudal 270 SP Spray Contact Adhesive is Transparent in colour and does not contain toluene or methylene chloride.
Aerosol Solvent Based Contact Adhesive
Rapid Strength Build-up
High Bond Strength
Suitable for most materials
Toluene and Methylene Chloride Free
For bonding a broad range of materials.
Bonding of most common materials such as rubber, cardboard, textiles, felts, leather, artificial leather, cork and plastics to several surfaces, and itself.
Bonding of decorative paper, PVC foil and other decorative foils onto chipboard, MDF and Triplex.
Not suitable for use on Polystyrene, Polyethylene, Polypropylene or PTFE.
Do not use in applications where continuous water immersion is possible.
Not suitable for vinyl or other materials with a high content of plasticizers.
The to-be-bonded materials should be flat and well fitting as well as clean, dry and free of dust and grease.
Generally, no pre-treatment is required. Rough grinding of smooth surfaces improves the adhesion.
A preliminary adhesion test on every surface is recommended.
Soudal 270SP Contact Adhesive Spray can be applied to almost all substrates, except for Polystyrene, Polyethylene, Polypropylene or PTFE.
Shake can well before use.
When processing, keep the aerosol can at all times upright and fully press the nozzle. Spray at a distance of approximately 5cm to 10cm of the object.
Apply the adhesive evenly to both to be bonded surfaces. Spray the lanes over the entire material, preferably having a halfway overlap of the previous lane in order to have covered the whole surface with 2 layers.
Two light coats (with overlap) give better results than one thick coat. Wait at least 10 minutes (at 23°C and 50% R.H.) and join the two parts together. Then press firmly together.
When making connections, the strength and not the duration of the compression will determine the ultimate strength. Preferably use a roller or a rubber hammer to press together.
After spraying, hold the can upside down and press the spray head until only propellant and no more product comes out to prevent clogging up of the spray can.
Approximately 3.5m² per 500ml Aerosol Can. Coverage will vary depending on application.
We've added to your cart