Soudal Silirub+ ® S1000 - Premium Sanitary Silicone

Limited Stock Only 17 remaining - order now!

Soudal Silirub+ ® S1000 - Premium Sanitary Silicone

Soudal | Silicone Sealant

Soudal Silirub+ ® S1000 is a Premium Quality Acetoxy Sanitary Grade Silicone Sealant which contains powerful anti-fungal agents to restrict mould growth.

Soudal Silirub+ ® S1000 is thick-bodied formulation with excellent toolability. Primerless adhesion on many construction materials including glass, ceramics, porcelain, metals and wood.

Soudal Silirub+ ® S1000 is not suitable for use on PVC.

Soudal Silirub+ ® S1000 is resistant to weathering, chemicals and high and low temperatures. Gloss type finish on all colours.

Benefits

Soudal Silirub+ ® S1000 - Premium Sanitary Silicone

  • Primerless Adhesion on Most Traditional Construction Materials

  • Conforms to ISO 11600 F&G 25 LM

  • XS1 Fungicide (Strongest Fungicide)

Application

Typical Applications:

  • Sealing of Joints in Sanitary Applications such as Bathrooms and Kitchens

  • Top Sealing in Glazing.

  • Joints in Building Products from Aluminium and Finished Materials.

  • Sealing in Refrigerators and Container Construction.

  • Sealing in Air Conditioning Systems.

Surface Preparation:

Surfaces should be clean, dry, free of dust and grease.

Porous surfaces in water loaded applications should be primed with Soudal Primer 150. No primer needed for non-porous substrates.

There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.

Application Method:

  • Application Method: With a manual or pneumatic caulking gun.

  • Cleaning: Clean with a Surface Cleaner immediately after use.

  • Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

  • Repair: With the same material

Joint Dimensions:

  • Minimum Width for Joints: 5 mm

  • Maximum Width for Joints: 30 mm

  • Minimum Depth for Joints: 5 mm

  • Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth.

Remarks:

  • Because of the acid nature, certain metals (eg copper, lead) can be affected.

  • Do not use on natural stone such as marble, granite, ... (staining). Use for this application Silirub®+ S8800.

  • Direct contact with the secondary sealing of insulating glass units (insulation) and the PVB-film of safety glass must be avoided.

  • The sanitary formula should not replace regular cleaning of the joint. Excessive contamination, deposits or soap remainings will stimulate the development of fungi.

  • A total absence of UV can cause a colour change of the sealant.

  • In an acid environment or in a dark room, white silicone can slightly turn yellow. Under the influence of sunlight it will turn back to its initial colour.

  • When finished with a finishing solution or soapy solution, make sure that the surfaces are not touched by this solution. This will cause the sealant not to adhere to that surface. Therefore we recommend to only dip the finishing tool in this solution.

  • We strongly recommend not to apply the product in full sunlight as it will dry very fast.

  • Do not use in applications where continuous water immersion is possible. Do not use on polycarbonate. Use Silirub® AL2T instead.

Data Sheets

Technical Data Sheet

Declaration of Performance (DoP)

More on this product...

£2.45 £1.99 ex. VAT | £2.94 £2.39 inc. VAT

  • Reviews

Related Items

  • £2.45 £1.99 ex. VAT | £2.94 £2.39 inc. VAT