Soudal | Silicone Sealant
Soudal Silirub ® S is a High Quality Sanitary Grade Acetoxy Silicone sealant which contains a biocide (DCOIT) to help prevent mould growth in areas prone to high humidity such as kitchens and bathrooms.
Soudal Silirub ® S has primerless adhesion on many common construction materials such as glass, ceramic, porcelain, metals and wood.
Soudal Silirub ® S is resistant to weathering, chemicals and high and low temperatures.
Very easy to apply
Colourfast and UV resistant
Impervious to mould
Permanent elastic after curing
Very good adhesion on many materials
Sanitary, Construction or Industrial applications.
Sealing in areas prone to high humidity - kitchens and bathrooms.
Sealing of all traditional sanitary ware including baths, showers, toilets, basins and glazed tile surrounds.
Surfaces should be clean, dry, free of dust and grease.
Porous surfaces in water loaded applications should be primed with Soudal Primer 150. No primer needed for non-porous substrates.
Not suitable for use on PVC.
There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.
Application Method: With a manual or pneumatic caulking gun.
Cleaning: Clean with a Surface Cleaner immediately after use.
Finishing: With a soapy solution or Soudal Finishing Solution before skinning.
Repair: With the same material
Minimum Width for Joints: 5 mm
Maximum Width for Joints: 30 mm
Minimum Depth for Joints: 5 mm
Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth.
Because of the acid nature, certain metals (eg copper, lead) can be affected.
Do not use on natural stones like marble, granite etc. as it may cause staining.
Direct contact with the secondary sealing of insulating glass units (insulation) and the PVB-film of safety glass must be avoided.
The sanitary formula should not replace regular cleaning of the joint. Excessive contamination, deposits or soap remainigs will stimulate the development of fungi.
A total absence of UV can cause a colour change of the sealant.
In an acid environment or in a dark room, white silicone can slightly turn yellow. Under the influence of sunlight it will turn back to its initial colour.
When finished with a finishing solution or soapy solution, make sure that the surfaces are not touched by this solution. This will cause the sealant not to adhere to that surface. Therefore we recommend to only dip the finishing tool in this solution.
We strongly recommend not to apply the product in full sunlight as it will dry very fast.
Do not use in applications where continuous water immersion is possible.
Do not use on polycarbonate. Use Silirub® AL2T instead.
We've added to your cart