Soudal | Expanding Foam
Soudafoam Window & Door XTRA is a Premium Grade, HIGH YIELD, Low Expansion Polyurethane Expanding Foam Filler which is recommended for filling gaps around Windows and Doors as it provides thermal and acoustic insulation around Window & Door Frames.
The Soudafoam XTRA Yield Formulation means improved value for money versus Standard Soudafoam Window & Door Foam, up to 50% more linear metres of filling per cannister.
There is also less wastage as the product does not expand outside the joint dimensions, if used correctly.
This product is supplied in Gun Grade cans with DuraValve™.
DuraValve™ is a unique valve system that improves the yield and performance of Soudafoam products over much longer time periods than standard valves.
DuraValve™ puts an end to commonly known issues such as poor yield and non-extrusion of PU Foams and is a standard for most gun applied Soudafoam Products.
Excellent adhesion on most substrates (except PTFE, PE and PP).
High insulation value, thermal and acoustic.
Excellent stability (no shrink or post expansion).
Very good bonding properties.
Product Basis: Polyurethane Foam Filler
Linear Yield FEICA TM1002 (750ml Gun Grade Cannister): 39 Metres
Acoustic Rating ISO 717-1: 58 dB
Thermal Conductivity DIN 52612: 37mW/mK
Fire Class (DIN4102): B3 Fire Rated
Application Temperatures: +5°C to +35°C
Installing of window and door frames
Filling of cavities
Sealing of all openings in roof constructions
Apply of an acoustic baffle
Improving thermal isolation in cooling systems
Shake the aerosol can for at least 20 seconds. Attach the can onto the Applicator Gun. Surface should be free from grease and dust.
Moisten surfaces with a water sprayer prior to application.
For non-conventional substrates a preliminary adhesion test is recommended.
Fill holes and cavities approximately ¾ full as the foam will expand slightly.
Repeat shaking regularly during application.
If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foam Cleaner or acetone.
Cured foam can only be removed mechanically or with Cured PU Foam Remover. Never burn away cured foam.
Take the usual labour hygiene into account.
Always wear gloves and goggles during application. See our Safety & PPE Products.
Consult label and material safety data sheet for more information.
We've added to your cart