{"product_id":"platon-plaster-plugs-damp-proof-membrane-fixing","title":"Platon Plaster Plugs","description":"\u003cp\u003ePlaton Plaster Plugs are specialist membrane fixing plugs used within the \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/collections\/platon-damp-proof-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Damp Proof Membrane System\u003c\/strong\u003e\u003c\/a\u003e for securing above-ground \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/collections\/platon-damp-proof-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton damp proofing membranes\u003c\/strong\u003e\u003c\/a\u003e to masonry walls.\u003c\/p\u003e\n\u003cp\u003eThey are well suited to \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/damp-proof-membrane-platon-pb2\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton PB2 Mesh\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-base-tanking-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Base\u003c\/strong\u003e\u003c\/a\u003e Membranes, providing a firm mechanical hold while the membrane is installed ready for plaster, render or dot and dab plasterboard finishes. The plugs are available in M8 x 50mm for general purpose fixing and M8 x 70mm for improved stability. Installation normally requires an \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/sds-drill-bit-8mm\" target=\"_blank\"\u003e\u003cstrong\u003e8mm SDS drill bit\u003c\/strong\u003e\u003c\/a\u003e on sound masonry, although a \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/sds-drill-bit-7mm\" target=\"_blank\"\u003e\u003cstrong\u003e7mm SDS drill bit\u003c\/strong\u003e\u003c\/a\u003e may be required on softer brickwork.\u003c\/p\u003e\n\u003cp\u003eFor direct plastering or rendering, 16 plugs per m² should be used. For dot and dab plasterboard, 10 plugs per m² is normally sufficient. Supplied in boxes of 500 as standard, however smaller pack quantities between 40 and 320 are also available to suit specific job sizes. \u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features of Platon Plaster Plugs\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e✔️ Specialist fixing plugs designed to secure \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/collections\/platon-damp-proof-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton damp proof membranes\u003c\/strong\u003e\u003c\/a\u003e to internal masonry walls before finishing.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✔️ Available in M8 x 50mm for general fixing and M8 x 70mm for improved stability and depth.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✔️ Recommended at 16 plugs per m² for direct plastering or 10 per m² for dot and dab.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✔️ Suitable for sound masonry using an \u003cstrong\u003e\u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/sds-drill-bit-8mm\" target=\"_blank\"\u003e8mm SDS bit\u003c\/a\u003e \u003c\/strong\u003eor softer brickwork using a \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/sds-drill-bit-7mm\" target=\"_blank\"\u003e\u003cstrong\u003e7mm SDS bit\u003c\/strong\u003e\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✔️ Compatible with\u003cstrong\u003e \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/damp-proof-membrane-platon-pb2\" target=\"_blank\"\u003ePlaton PB2 Mesh\u003c\/a\u003e\u003c\/strong\u003e and \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-base-tanking-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Base\u003c\/strong\u003e\u003c\/a\u003e Membranes in above-ground damp proofing applications.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(88, 88, 88);\"\u003eReliable Fixing Plugs For Platon Damp Proof Membranes And Internal Wall Finishes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003ePlaton Plaster Plugs are used to secure \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/collections\/platon-damp-proof-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton damp proofing membranes\u003c\/strong\u003e\u003c\/a\u003e firmly to internal masonry walls, keeping the membrane tight, stable and correctly positioned before the final wall finish is applied. They are most commonly specified in above-ground damp proofing applications, where the membrane is installed to separate new plaster, render or plasterboard from dampness, salts and contamination within the existing wall structure. Correct fixing is genuinely important because the membrane must remain completely stable during finishing operations. If it is not secured adequately, it may move, drum or flex behind the completed surface, affecting both the immediate appearance and the long-term performance and durability of the internal wall finish applied over it.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(88, 88, 88);\"\u003eAvailable In Two Sizes For Sound And Softer Masonry Backgrounds\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eThe plugs are available in two sizes to suit different wall conditions and installation requirements. The M8 x 50mm plug is well suited to general fixing into sound masonry, while the M8 x 70mm plug provides improved stability in situations where additional fixing depth is preferred or the substrate demands a longer anchorage. Installation normally requires an \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/sds-drill-bit-8mm\" target=\"_blank\"\u003e\u003cstrong\u003e8mm SDS drill bit\u003c\/strong\u003e\u003c\/a\u003e to create a clean, accurate hole through the membrane and into the wall, though on softer masonry such as soft Victorian brickwork, handmade clay brick or older lime-mortar brickwork, a \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/sds-drill-bit-7mm\" target=\"_blank\"\u003e\u003cstrong\u003e7mm SDS drill bit\u003c\/strong\u003e\u003c\/a\u003e may provide a noticeably tighter fit and better overall plug retention within the weaker background material before finishing work begins.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(88, 88, 88);\"\u003eCompatible With Platon PB2 Mesh And Platon Plaster Base Membranes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003ePlaton Plaster Plugs are well suited to both \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/damp-proof-membrane-platon-pb2\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton PB2 Mesh\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-base-tanking-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Base\u003c\/strong\u003e\u003c\/a\u003e Membranes, each of which creates a moisture-resistant separation layer between the damp wall and the internal finish while still allowing vapour diffusion. In higher risk damp situations, the plug head can be sealed using \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-plug-seals\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Plug Seals\u003c\/strong\u003e\u003c\/a\u003e or \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/newton-mastic-sealant\" target=\"_blank\"\u003e\u003cstrong\u003eNewtonite 801 Mastic\u003c\/strong\u003e\u003c\/a\u003e to reduce the risk of moisture tracking through the fixing point. Where \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-base-tanking-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Base\u003c\/strong\u003e\u003c\/a\u003e is used below ground, the M8 x 70mm fixing is specifically recommended and must be sealed with a bead of \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-membrane-sealing-rope\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Sealing Rope\u003c\/strong\u003e\u003c\/a\u003e, as below-ground conditions are considerably more demanding and fixing penetrations must be properly sealed to help maintain the long-term integrity of the membrane installation.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cstyle\u003e\n  .pc-platon-plaster-plugs-table-wrap {\n    width: 100%;\n    max-width: 100%;\n    overflow-x: auto;\n    -webkit-overflow-scrolling: touch;\n    margin: 24px 0;\n  }\n\n  .pc-platon-plaster-plugs-table {\n    width: 100%;\n    min-width: 620px;\n    table-layout: fixed;\n    border-collapse: collapse;\n    font-family: inherit;\n    font-size: 16px;\n    line-height: 1.25;\n    color: #111;\n    background: #fff;\n  }\n\n  .pc-platon-plaster-plugs-table col:nth-child(1) { width: 38%; }\n  .pc-platon-plaster-plugs-table col:nth-child(2) { width: 62%; }\n\n  .pc-platon-plaster-plugs-table th,\n  .pc-platon-plaster-plugs-table td {\n    border: 5px solid #fff;\n    padding: 8px 12px;\n    vertical-align: middle;\n    font-weight: 400;\n  }\n\n  .pc-platon-plaster-plugs-table .pc-main-title th {\n    background: #7f7f7f;\n    color: #fff;\n    text-align: center;\n    text-transform: uppercase;\n    font-size: 30px;\n    line-height: 1.15;\n    font-weight: 700;\n    letter-spacing: 0.2px;\n    padding: 12px 10px;\n  }\n\n  .pc-platon-plaster-plugs-table .pc-column-head th {\n    background: #a6a6a6;\n    color: #111;\n    font-size: 16px;\n    line-height: 1.2;\n    font-weight: 700;\n    text-align: left;\n    padding: 10px 12px;\n  }\n\n  .pc-platon-plaster-plugs-table .pc-data-row td {\n    background: #fff;\n    text-align: left;\n  }\n\n  .pc-platon-plaster-plugs-table .pc-data-row.pc-grey td {\n    background: #d9d9d9;\n  }\n\n  .pc-platon-plaster-plugs-table .pc-spec-cell {\n    font-weight: 700;\n  }\n\n  @media screen and (max-width: 767px) {\n    .pc-platon-plaster-plugs-table {\n      font-size: 14px;\n      min-width: 600px;\n    }\n\n    .pc-platon-plaster-plugs-table th,\n    .pc-platon-plaster-plugs-table td {\n      padding: 7px 9px;\n      border-width: 4px;\n    }\n\n    .pc-platon-plaster-plugs-table .pc-main-title th {\n      font-size: 24px;\n      padding: 10px 8px;\n    }\n\n    .pc-platon-plaster-plugs-table .pc-column-head th {\n      font-size: 15px;\n      padding: 9px;\n    }\n  }\n\u003c\/style\u003e\n\u003cdiv class=\"pc-platon-plaster-plugs-table-wrap\"\u003e\n\u003ctable aria-label=\"Platon Plaster Plugs Technical Information\" class=\"pc-platon-plaster-plugs-table\"\u003e\n\u003ccolgroup\u003e \u003ccol\u003e \u003ccol\u003e \u003c\/colgroup\u003e\n\u003cthead\u003e\n\u003ctr class=\"pc-main-title\"\u003e\n\u003cth colspan=\"2\"\u003eTechnical Information\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pc-column-head\"\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pc-data-row\"\u003e\n\u003ctd class=\"pc-spec-cell\"\u003ePlug Sizes\u003c\/td\u003e\n\u003ctd\u003eM8 x 50mm, M8 x 70mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pc-data-row pc-grey\"\u003e\n\u003ctd class=\"pc-spec-cell\"\u003ePack Sizes\u003c\/td\u003e\n\u003ctd\u003e500, 320, 250, 160, 120, 100, 80 and 40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pc-data-row\"\u003e\n\u003ctd class=\"pc-spec-cell\"\u003eStandard Drill Size\u003c\/td\u003e\n\u003ctd\u003e8mm SDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pc-data-row pc-grey\"\u003e\n\u003ctd class=\"pc-spec-cell\"\u003eSoft Masonry Drill Size\u003c\/td\u003e\n\u003ctd\u003e7mm SDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pc-data-row\"\u003e\n\u003ctd class=\"pc-spec-cell\"\u003ePlugs Per m²\u003c\/td\u003e\n\u003ctd\u003e16\/m² direct, 10\/m² dot and dab\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pc-data-row pc-grey\"\u003e\n\u003ctd class=\"pc-spec-cell\"\u003eFixing Method\u003c\/td\u003e\n\u003ctd\u003eHammer driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pc-data-row\"\u003e\n\u003ctd class=\"pc-spec-cell\"\u003eMain Use\u003c\/td\u003e\n\u003ctd\u003ePlaster membrane fixing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pc-data-row pc-grey\"\u003e\n\u003ctd class=\"pc-spec-cell\"\u003eSuitable Membranes\u003c\/td\u003e\n\u003ctd\u003ePB2 Mesh, Plaster Base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pc-data-row\"\u003e\n\u003ctd class=\"pc-spec-cell\"\u003eApplication Area\u003c\/td\u003e\n\u003ctd\u003eAbove-ground damp proofing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pc-data-row pc-grey\"\u003e\n\u003ctd class=\"pc-spec-cell\"\u003eBelow-Ground Use\u003c\/td\u003e\n\u003ctd\u003e70mm plug with Sealing Rope\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pc-data-row\"\u003e\n\u003ctd class=\"pc-spec-cell\"\u003eOptional Seals\u003c\/td\u003e\n\u003ctd\u003ePlug washers, 801 Mastic, Sealing Rope\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pc-data-row pc-grey\"\u003e\n\u003ctd class=\"pc-spec-cell\"\u003eFinish Compatibility\u003c\/td\u003e\n\u003ctd\u003ePlaster, render, plasterboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pc-data-row\"\u003e\n\u003ctd class=\"pc-spec-cell\"\u003eSuitable Substrates\u003c\/td\u003e\n\u003ctd\u003eInternal masonry walls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pc-data-row pc-grey\"\u003e\n\u003ctd class=\"pc-spec-cell\"\u003e50mm Plug Use\u003c\/td\u003e\n\u003ctd\u003eGeneral purpose fixing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pc-data-row\"\u003e\n\u003ctd class=\"pc-spec-cell\"\u003e70mm Plug Use\u003c\/td\u003e\n\u003ctd\u003eImproved stability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSecure Membrane Fixing: \u003c\/strong\u003ePlaton Plaster Plugs hold \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/collections\/platon-damp-proof-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton damp proofing membranes\u003c\/strong\u003e\u003c\/a\u003e firmly against masonry walls, helping prevent movement, sagging or drumming before plaster, render or dot and dab plasterboard finishes are applied.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTwo Fixing Lengths Available:\u003c\/strong\u003e The M8 x 50mm plug is well suited to general fixing into sound masonry, while the M8 x 70mm plug provides improved stability in situations where a deeper or stronger fixing is required.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for Platon PB2 Mesh:\u003c\/strong\u003e The plugs are well suited to fixing \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/damp-proof-membrane-platon-pb2\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton PB2 Mesh\u003c\/strong\u003e\u003c\/a\u003e, helping hold the meshed membrane tight to the wall so it can provide a stable key for plaster, render or board adhesive.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for Platon Plaster Base: \u003c\/strong\u003eThe plugs can also be used with \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-base-tanking-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Base\u003c\/strong\u003e\u003c\/a\u003e, a non-mesh cavity membrane with a dovetail-shaped stud profile that physically keys plaster, render or adhesive-fixed plasterboard.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSupports Direct Plastering and Rendering:\u003c\/strong\u003e When installed at 16 plugs per m², the plugs help restrain the membrane closely enough to support direct plastering or rendering, subject to the correct membrane and system specification.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for Dot and Dab Plasterboard: \u003c\/strong\u003eFor dot and dab plasterboard installations, 10 plugs per m² is normally sufficient to secure the membrane before adhesive dabs and boards are applied.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSealing Options for Higher Risk Areas:\u003c\/strong\u003e Where the wall condition presents a greater damp risk, \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-plug-seals\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Plug Seals\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/newton-mastic-sealant\" target=\"_blank\"\u003e\u003cstrong\u003eNewtonite 801 Mastic\u003c\/strong\u003e\u003c\/a\u003e or \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-membrane-sealing-rope\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Sealing Rope\u003c\/strong\u003e\u003c\/a\u003e can be used to improve protection around the plug head.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eUseful on Softer Brickwork: \u003c\/strong\u003eAlthough an \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/sds-drill-bit-8mm\" target=\"_blank\"\u003e\u003cstrong\u003e8mm SDS drill bit\u003c\/strong\u003e\u003c\/a\u003e is normally used, a \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/sds-drill-bit-7mm\" target=\"_blank\"\u003e\u003cstrong\u003e7mm SDS drill bit \u003c\/strong\u003e\u003c\/a\u003emay improve fixing grip on softer brickwork, handmade clay brick or older lime-mortar masonry.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHelps Protect Internal Finishes: \u003c\/strong\u003eBy fixing the membrane securely, the plugs help maintain separation between damp or salt-contaminated masonry and the new plaster, render or plasterboard finish.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePractical for Damp Wall Refurbishment: \u003c\/strong\u003eThe plugs are well suited to remedial damp proofing work in older buildings, refurbishments and internal renovation projects where a membrane-based damp proofing system is required.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eTypical Applications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePlaton PB2 Mesh Membrane Fixing: \u003c\/strong\u003ePlaton Plaster Plugs are well suited to securing \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/damp-proof-membrane-platon-pb2\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton PB2 Mesh\u003c\/strong\u003e\u003c\/a\u003e to internal masonry walls before plastering, rendering or dot and dab plasterboard installation.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePlaton Plaster Base Membrane Fixing:\u003c\/strong\u003e The plugs are suitable for fixing \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-base-tanking-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Base\u003c\/strong\u003e\u003c\/a\u003e, in situations where the undercut stud profile is used to create a key for plaster, render or adhesive-fixed plasterboard.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Above-Ground Damp Proofing: \u003c\/strong\u003eTheir main use is internal above-ground damp proofing, where the membrane separates new wall finishes from dampness and salts within the existing wall structure.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDirect Plastering Over Membranes: \u003c\/strong\u003eUsed at approximately 16 plugs per m², the plugs help hold the membrane tight and stable before plaster is applied to the membrane surface.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDirect Rendering Over Membranes:\u003c\/strong\u003e Well suited to render applications where the membrane needs a firm fixing pattern to reduce movement while the render is applied and cures.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDot and Dab Plasterboard Systems:\u003c\/strong\u003e Used at approximately 10 plugs per m², the plugs help restrain the membrane before plasterboard is fixed using dot and dab adhesive.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigher Risk Damp Wall Details:\u003c\/strong\u003e In more demanding situations, the plug head can be sealed using \u003cstrong\u003e\u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-plug-seals\" target=\"_blank\"\u003ePlaton Plaster Plug Seals\u003c\/a\u003e \u003c\/strong\u003eor \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/newton-mastic-sealant\" target=\"_blank\"\u003e\u003cstrong\u003eNewtonite 801 Mastic\u003c\/strong\u003e\u003c\/a\u003e, helping reduce damp tracking through the fixing point.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBelow-Ground Platon Plaster Base Details:\u003c\/strong\u003e Where\u003cstrong\u003e \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-base-tanking-membrane\" target=\"_blank\"\u003ePlaton Plaster Base\u003c\/a\u003e\u003c\/strong\u003e is used below ground, the 70mm fixing should be used and sealed with \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-membrane-sealing-rope\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Sealing Rope\u003c\/strong\u003e\u003c\/a\u003e around the fixing point.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSalt-Contaminated Masonry Walls: \u003c\/strong\u003eThe plugs are useful when fixing membranes that isolate new finishes from salt-contaminated walls, helping reduce the risk of staining, blistering and finish breakdown.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRefurbishment and Renovation Projects:\u003c\/strong\u003e Well suited to domestic and commercial damp proofing work where internal walls need a membrane system before plaster, render or plasterboard finishes are installed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eFAQ's\u003c\/h5\u003e\n\u003ch3\u003eQ) What are Platon Plaster Plugs used for?\u003c\/h3\u003e\n\u003cp\u003eA) Platon Plaster Plugs are specialist fixings used to secure \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/collections\/platon-damp-proof-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton damp proofing membranes\u003c\/strong\u003e\u003c\/a\u003e to internal masonry walls, mainly in above-ground damp proofing applications. They hold membranes such as \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/damp-proof-membrane-platon-pb2\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton PB2 Mesh\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-base-tanking-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Base\u003c\/strong\u003e\u003c\/a\u003e firmly against the wall before plaster, render or dot and dab plasterboard finishes are applied. This is important because the membrane must stay stable during finishing and throughout service. If it is not fixed closely enough, the wall finish can move, drum, crack or feel hollow. Platon Plaster Plugs help create a secure mechanical fixing pattern, allowing the membrane to isolate new finishes from dampness, salts and contamination in the existing wall.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eQ) Which Platon membranes can Platon Plaster Plugs be used with?\u003c\/h3\u003e\n\u003cp\u003eA) Platon Plaster Plugs are well suited to \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/damp-proof-membrane-platon-pb2\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton PB2 Mesh\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-base-tanking-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Base\u003c\/strong\u003e\u003c\/a\u003e Membranes. \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/damp-proof-membrane-platon-pb2\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton PB2 Mesh\u003c\/strong\u003e\u003c\/a\u003e is a meshed damp proof membrane designed to provide a surface key for plaster, render or compatible board adhesive. \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-base-tanking-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Base\u003c\/strong\u003e\u003c\/a\u003e is a non-mesh cavity membrane with an undercut, dovetail-shaped stud profile that physically holds plaster, render or adhesive-fixed plasterboard. Both membranes are used to separate new internal finishes from damp or salt-contaminated masonry while still allowing vapour diffusion. The plugs provide the mechanical restraint needed to keep these membranes stable and correctly positioned, which is especially important before wet plastering or rendering loads are applied.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eQ) Are Platon Plaster Plugs for above-ground or below-ground use?\u003c\/h3\u003e\n\u003cp\u003eA) Platon Plaster Plugs are mainly intended for above-ground internal damp proofing work, where \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/collections\/platon-damp-proof-membrane\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton damp proofing membranes\u003c\/strong\u003e\u003c\/a\u003e are fixed to masonry walls before plaster, render or plasterboard finishes. Typical uses include refurbishment of damp internal walls, salt-contaminated masonry and older properties where a membrane system is being used to protect the new wall finish. They can be used in some below-ground \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-base-tanking-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Base\u003c\/strong\u003e\u003c\/a\u003e details, but extra care is needed. Where \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-base-tanking-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Base\u003c\/strong\u003e\u003c\/a\u003e is used below ground, the M8 x 70mm fixing is recommended, and each fixing must be sealed with \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-membrane-sealing-rope\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Sealing Rope\u003c\/strong\u003e\u003c\/a\u003e to help protect the membrane system against water tracking through the fixing point.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eQ) What size Platon Plaster Plugs are available?\u003c\/h3\u003e\n\u003cp\u003eA) Platon Plaster Plugs are available in two main sizes: M8 x 50mm and M8 x 70mm. The M8 x 50mm plug is generally used for standard fixing into sound masonry, where the wall is firm enough to provide a reliable anchor and the application does not require additional fixing depth. The M8 x 70mm plug provides improved stability and is useful where a deeper fixing is preferred, such as less consistent backgrounds or more demanding installation details. The 70mm version is also recommended where \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-base-tanking-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Base\u003c\/strong\u003e\u003c\/a\u003e is used below ground, provided the fixing is sealed correctly with \u003cstrong\u003ePlaton Sealing Rope \u003c\/strong\u003eas part of the system detail.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eQ) What drill bit size is needed for Platon Plaster Plugs?\u003c\/h3\u003e\n\u003cp\u003eA) Platon Plaster Plugs normally require an \u003cstrong\u003e\u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/sds-drill-bit-8mm\" target=\"_blank\"\u003e8mm SDS drill bit\u003c\/a\u003e \u003c\/strong\u003ewhen fixing into sound masonry. The hole should be drilled through the membrane and into the wall cleanly, allowing the plug to anchor properly without damaging the membrane unnecessarily. On softer masonry, such as soft Victorian brickwork, handmade clay brick or older lime-mortar walls, a \u003cstrong\u003e\u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/sds-drill-bit-7mm\" target=\"_blank\"\u003e7mm SDS drill bit\u003c\/a\u003e \u003c\/strong\u003emay give a tighter fit and better grip. This can help where an 8mm hole feels too loose or where the plug does not hold firmly. The aim is always a secure mechanical fixing, so the drill size should suit the actual wall condition rather than being chosen blindly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eQ) How many Platon Plaster Plugs are needed per m²?\u003c\/h3\u003e\n\u003cp\u003eA) The number of Platon Plaster Plugs needed per m² depends on the finish being applied over the membrane. For direct plastering or rendering, around 16 plugs per m² should be used because the membrane needs to be held firmly and evenly against the wall while the wet finish is applied and cures. This helps reduce movement, drumming and surface instability. For dot and dab plasterboard, around 10 plugs per m² is normally sufficient because the adhesive dabs and boards provide a different type of finishing system. The fixing pattern should still be even and consistent, with extra attention around edges, corners, reveals and areas where the membrane could lift.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eQ) How are Platon Plaster Plugs installed?\u003c\/h3\u003e\n\u003cp\u003eA) Platon Plaster Plugs are installed by drilling through the membrane and into the masonry substrate, then driving the plug into the hole so it holds the membrane tightly against the wall. The membrane should be positioned correctly first, with sheets aligned and ready for fixing. An \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/sds-drill-bit-8mm\" target=\"_blank\"\u003e\u003cstrong\u003e8mm SDS drill bit\u003c\/strong\u003e\u003c\/a\u003e is normally used on sound masonry, while a \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/sds-drill-bit-7mm\" target=\"_blank\"\u003e\u003cstrong\u003e7mm bit\u003c\/strong\u003e\u003c\/a\u003e may be better on softer brickwork. Once the hole is drilled, the plug is inserted and tapped home until it secures the membrane firmly without damaging it. The fixing pattern should follow the required density for the chosen finish, with 16 plugs per m² for direct plaster or render and 10 plugs per m² for dot and dab plasterboard.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eQ) Can Platon Plaster Plugs be used for direct plastering or rendering?\u003c\/h3\u003e\n\u003cp\u003eA) Yes, Platon Plaster Plugs can be used where \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/damp-proof-membrane-platon-pb2\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton PB2 Mesh\u003c\/strong\u003e\u003c\/a\u003e or \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-base-tanking-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Base\u003c\/strong\u003e\u003c\/a\u003e is being prepared for direct plastering or rendering, provided the correct fixing density and membrane specification are followed. For this type of finish, 16 plugs per m² should be used to hold the membrane tight to the wall and reduce movement during application. This is important because plaster and render place weight and pressure onto the membrane surface, especially while wet. If the membrane is under-fixed, it can flex or pull away from the substrate, which may affect the finished surface. A close, even fixing pattern helps create a more stable base for the applied finish.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eQ) Can Platon Plaster Plugs be used with dot and dab plasterboard?\u003c\/h3\u003e\n\u003cp\u003eA) Yes, Platon Plaster Plugs can be used when \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/damp-proof-membrane-platon-pb2\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton PB2 Mesh\u003c\/strong\u003e\u003c\/a\u003e or \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-base-tanking-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Base\u003c\/strong\u003e\u003c\/a\u003e is being prepared for dot and dab plasterboard finishes. In this type of installation, around 10 plugs per m² is normally sufficient to secure the membrane before plasterboard adhesive dabs and boards are applied. The plugs keep the membrane restrained against the wall so the adhesive can be applied to a stable surface. \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-base-tanking-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Base\u003c\/strong\u003e\u003c\/a\u003e is particularly suitable for adhesive-fixed plasterboard because its dovetail-shaped stud profile provides a physical key. As with all membrane installations, the wall should be sound, the fixing pattern should be consistent, and the board system should be applied in line with the membrane specification.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eQ) Do Platon Plaster Plugs need to be sealed?\u003c\/h3\u003e\n\u003cp\u003eA) Platon Plaster Plugs do not always need to be sealed in standard above-ground damp proofing applications, but sealing may be required in higher risk damp wall situations. Where additional protection is needed, the plug head can be sealed using \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-plug-seals\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Plug Seals\u003c\/strong\u003e\u003c\/a\u003e or \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/newton-mastic-sealant\" target=\"_blank\"\u003e\u003cstrong\u003eNewtonite 801 Mastic\u003c\/strong\u003e\u003c\/a\u003e to help reduce the risk of moisture tracking through the fixing point. This can be useful where the wall is more heavily damp, salt-contaminated or exposed to more demanding conditions. If \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-base-tanking-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Base\u003c\/strong\u003e\u003c\/a\u003e is used below ground, sealing becomes more important. In that situation, the M8 x 70mm fixing should be used and sealed with \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-membrane-sealing-rope\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Sealing Rope\u003c\/strong\u003e\u003c\/a\u003e around the fixing point.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eQ) What should I consider when fixing Platon Plaster Plugs into soft or old brickwork?\u003c\/h3\u003e\n\u003cp\u003eA) When fixing Platon Plaster Plugs into soft or older brickwork, the main issue is achieving a firm hold without creating an oversized or weak fixing hole. Soft Victorian brickwork, handmade clay brick and lime-mortar masonry can sometimes crumble or drill slightly larger than expected, especially if an \u003cstrong\u003e\u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/sds-drill-bit-8mm\" target=\"_blank\" rel=\"noopener\"\u003e8mm SDS bit\u003c\/a\u003e \u003c\/strong\u003eis too aggressive. In these cases, a \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/sds-drill-bit-7mm\" target=\"_blank\"\u003e\u003cstrong\u003e7mm SDS drill bit\u003c\/strong\u003e\u003c\/a\u003e may provide a tighter fixing and better plug retention. The wall should be checked for loose, friable or unstable areas before installation, and any weak background should be avoided or repaired where necessary. A secure plug is essential, because the membrane needs to remain stable under plaster, render or plasterboard finishes.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eQ) What are the main limitations of Platon Plaster Plugs?\u003c\/h3\u003e\n\u003cp\u003eA) Platon Plaster Plugs are designed for fixing \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/collections\/platon-damp-proof-membrane\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton damp proofing membranes\u003c\/strong\u003e\u003c\/a\u003e to suitable masonry substrates, so they should not be treated as universal fixings for every wall type or every waterproofing situation. They need a sound substrate that can hold the plug securely, and the correct drill bit size must be used for the wall condition. They are mainly for above-ground damp proofing, and below-ground use requires specific detailing, including M8 x 70mm plugs and \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-membrane-sealing-rope\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Sealing Rope\u003c\/strong\u003e\u003c\/a\u003e where \u003ca href=\"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-base-tanking-membrane\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003ePlaton Plaster Base\u003c\/strong\u003e\u003c\/a\u003e is used below ground. They should also be installed at the correct fixing density. Under-fixing the membrane can lead to movement, drumming, poor finish quality and reduced long-term performance.\u003cbr\u003e\u003c\/p\u003e","brand":"Isola","offers":[{"title":"(W) 8mm x (L) 50mm \/ Box of 500","offer_id":33425382998115,"sku":"TT30","price":28.0,"currency_code":"GBP","in_stock":true},{"title":"(W) 8mm x (L) 50mm \/ Box of 40","offer_id":33425383030883,"sku":"TT30-040","price":3.5,"currency_code":"GBP","in_stock":true},{"title":"(W) 8mm x (L) 50mm \/ Box of 80","offer_id":33425383063651,"sku":"TT30-080","price":5.75,"currency_code":"GBP","in_stock":true},{"title":"(W) 8mm x (L) 50mm \/ Box of 100","offer_id":33425383096419,"sku":"TT30-100","price":6.5,"currency_code":"GBP","in_stock":true},{"title":"(W) 8mm x (L) 50mm \/ Box of 120","offer_id":33425383129187,"sku":"TT30-120","price":7.75,"currency_code":"GBP","in_stock":true},{"title":"(W) 8mm x (L) 50mm \/ Box of 160","offer_id":33425383161955,"sku":"TT30-160","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"(W) 8mm x (L) 50mm \/ Box of 250","offer_id":33425383194723,"sku":"TT30-250","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"(W) 8mm x (L) 50mm \/ Box of 320","offer_id":33425383227491,"sku":"TT30-320","price":18.5,"currency_code":"GBP","in_stock":true},{"title":"(W) 8mm x (L) 70mm \/ Box of 500","offer_id":33425383260259,"sku":"TT31","price":29.0,"currency_code":"GBP","in_stock":true},{"title":"(W) 8mm x (L) 70mm \/ Box of 40","offer_id":33425383293027,"sku":"TT31-040","price":3.95,"currency_code":"GBP","in_stock":true},{"title":"(W) 8mm x (L) 70mm \/ Box of 80","offer_id":33425383325795,"sku":"TT31-080","price":6.1,"currency_code":"GBP","in_stock":true},{"title":"(W) 8mm x (L) 70mm \/ Box of 100","offer_id":33425383358563,"sku":"TT31-100","price":6.8,"currency_code":"GBP","in_stock":true},{"title":"(W) 8mm x (L) 70mm \/ Box of 120","offer_id":33425383391331,"sku":"TT31-120","price":8.1,"currency_code":"GBP","in_stock":true},{"title":"(W) 8mm x (L) 70mm \/ Box of 160","offer_id":33425383424099,"sku":"TT31-160","price":10.4,"currency_code":"GBP","in_stock":true},{"title":"(W) 8mm x (L) 70mm \/ Box of 250","offer_id":33425383456867,"sku":"TT31-250","price":15.5,"currency_code":"GBP","in_stock":true},{"title":"(W) 8mm x (L) 70mm \/ Box of 320","offer_id":33425383489635,"sku":"TT31-320","price":19.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2617\/5036\/files\/platon-plaster-plugs-w-8mm-x-l-50mm-box-of-500-damp-proof-membrane-ancillaries-460.webp?v=1780488246","url":"https:\/\/www.platinumchemicals.co.uk\/products\/platon-plaster-plugs-damp-proof-membrane-fixing","provider":"Platinum Chemicals","version":"1.0","type":"link"}