Nuaire Group | Positive Input Ventilation (PIV)
Save 5% with the Nuaire Drimaster ECO HEAT HC Bundle.
The Nuaire Drimaster ECO HEAT HC is a low energy ventilation system which has a unique 400W heating element to temper the airflow on entering the property.
The Nuaire Drimaster ECO HEAT HC is supported by BBA Certification Certificate No: 00/3727.
Read our Guide on 'How to Stop Condensation Using PIV'
The Nuaire Drimaster ECO HEAT HC is a low energy whole house ventilation system. With its cost effective solution of a non-disruptive installation, this unit is ideal for repairs and maintenance schemes.
Suitable for all properties with loft space, the Nuaire Drimaster ECO HEAT HC has controls situated behind the diffuser for ease of commissioning and maintenance checks.
The development of new technology also provides additional benefits for both the housing provider and the occupant, relative humidity (RH) and carbon dioxide sensors which will automatically adjust the fans speed above set levels to maintain good indoor air quality within the property.
Its’ enhanced technology uses up to 20% less energy than the competition.
Cures Condensation Dampness: PIV reduces the humidity in the air, curing condensation dampness preventing mould growth
Improved Indoor air Quality and Healthy Living Environment: Indoor pollutants from cooking and cleaning, as well as outdoor pollutants including traffic fumes, pollen and Radon gas are eradicated from the home
Unique Cost Effective Solution on Tempering Incoming Air: Thermostatically controlled 400 watt comfort heater positioned at the diffuser resulting in minimal heat loss
Occupant Controllability: The remote switch Nuaire DRI ECO 4S (Included) is used to provide the occupant control of their own comfort within the home
Remote Sensor Compatibility: Remote Relative Humidity Sensor, Nuaire DRI ECO RH (Included) is a wireless sensor that continually monitors the humidity levels within the property and intelligently sends a signal back to the unit to ensure the correct amount of airflow is being delivered into the home.
Meets Regulations: Meets Part F & L of Building Regulations as a low-energy ventilation strategy
Easy & Simple Installation: Under one hour
Modern, Sleek Circular Diffuser: Provides occupant acceptability
Hall Control: System controls located in the ceiling diffuser for easy commission and access for maintenance checks
Filter Change Indicator: To ensure optimum performance is maintained
Very Low Maintenance: Filter clean or replacement every five years
Extremely Energy Efficient: System goes into standby during warmer months when there is no evidence of condensation
Health Benefits: Clinically proven to help allergy and asthma sufferers
7 Year Warranty: 1 year parts and labour, remaining 6 years parts only.
The Nuaire Drimaster ECO HEAT HC provides whole home ventilation using the Positive Input Ventilation principle.
Essentially the concept is to introduce fresh, filtered air into the dwelling at a continuous rate, encouraging movement of air from inside to outside.
To achieve this, the unit is mounted in the loft space, drawing air through the filters and inputting it, at ceiling level, into the property.
An integrated heater tempers airflow should the temperature in the loft space drop below a set point, ensuring ultimate comfort in the home.
This unit also comes with a 7 segment display in the ceiling diffuser, offering complete control at the touch of a button without needing access to the unit located in the loft space. A lock function can be used to ensure the system remains tamper-proof.
Our range of Nuaire Drimaster-Eco units are fitted with an internal temperature sensor. This sensor continuously monitors the temperature in the loft, boosting the air volume when the loft temperature is above a set level.
If the loft temperature becomes excessive the unit will switch to standby mode (no airflow). Once installed, the airflow can be set to suit the house size and, if required, the way it responds to the temperature changes within.
Commissioning can be carried out via the controls cited within the ceiling diffuser.
This unit's integral radio frequency receiver allows additional functions with optional remote and wired sensors and switches, listed below.
Nuaire DRI ECO CO2: A Carbon Dioxide detector which must be wired in to the properties mains power supply. This sensor will trigger the units boost function should Carbon Dioxide levels rise above a set point within the home, therefore increasing the airflow and forcing the polluted air out of the property
The Nuaire Drimaster ECO HEAT HC provides whole home ventilation for properties with lofts.
The unit is mounted in the loft-space, drawing air through the filters and inputting it, at ceiling level, into the property.
The Nuaire DRI-ECO-RH is a Remote Humidity Sensor control which can be situated anywhere in the home.
This wireless sensor continually monitors the humidity levels within the property and intelligently sends a signal back to the unit to ensure the correct amount of airflow is being delivered into the home.
Automated Technology: The PIV unit receives a signal from the Nuaire DRI-ECO-RH and intelligently boosts the fan speed to provide additional ventilation when high humidity levels are measured, to maintain a healthy living environment for the occupants.
Wireless Controls: Compatible PIV units are controlled via radio frequency, therefore no unsightly wires are visible within the home.
Extremely Low Power Consumption: By using 2 Alkaline AA batteries (approx 2 years life) provided with the sensor.
LED Display: This has an energy saving mode and will only indicate the RH levels within the home when the indent button is pressed.
Easy Installation: Switch comes with adhesive tape pre-fitted on the back, or the option to screw to the wall if desired.
The Nuaire DRI-ECO-RH is supplied with 2 x AA batteries.
Upon purchase it is ‘bound’ to the PIV unit in the loft space via radio frequency, making it a wireless control option.
Sensor can be fitted with screws or the supplied adhesive tape.
The Nuaire DRI-ECO-4S is a control which can be situated anywhere in the home.
A boost button gives the occupant the option to temporarily increase the speed of the fan when high levels of moisture are being produced, for example when cooking or drying clothes indoors. The unit will revert back to its usual settings after two hours, to maintain optimum levels of comfort for the occupants.
In addition, the occupant can choose to override the heater setting to suit their own preferences.
Occupant Controllability: Allows the occupant the ability to set the levels to suit their preferences for their home environment
Wireless Control: The PIV unit (DRI-ECO-HEAT-HC) is controlled via radio frequency to allow wireless commands from switch to unit
Extremely Low Power Consumption: 3v lithium battery (approx 10 year life) is provided with switch
Automated Technology: The PIV unit receives a signal from the DRI-ECO-4S which intelligently responds to the occupants' individual airflow requirements
Easy Installation: Switch comes with adhesive tape pre-fitted on the back, or the option to screw in to the wall. Can be fitted anywhere in the home.
The Nuaire DRI-ECO-4S comes fitted with a 3V lithium battery.
Upon purchase it is ‘bound’ to the PIV Unit in the loft space via radio frequency, making it a wireless control option.Switch can be fitted with screws or the supplied adhesive tape.
We've added to your cart