Wykamol Group | Mould Control
The Mould Control System (MCS) is a two stage treatment for walls, ceilings etc. affected by condensation mould. When both stages are completed, surfaces will exhibit excellent resistance to mould growth even under severe condensation conditions.
Typically, full control can be achieved for up to 5 years but this can be extended considerably where moisture control measures are implemented.
MCS1 Mould Clear Solution is an initial wash and sterilisation treatment to remove and kill mould spores and surface growths on painted or papered surfaces.
MCS1 Mould Clear Solution is the cleaning supplied in our Mould Eradication Kit (Stage 1).
MSC1 Mould Clear Solution carries the HSE Approval No 9453.
Supplied in 1 Litre Trigger Spray bottles, ready-to-use solution.
Can be used on walls, ceilings, window reveals, frames, doors etc.
Removes and kills mould for up to 5 years when used in conjunction with MCS3 Paint Additive.
Cleans and sterilises surfaces.
Solution comes in ready-to-use spray bottle.
Spray MCS1 Mould Clear Solution onto the affected surface from a distance of 3-5cm.
Treat visible mould PLUS 1 metre beyond. Repeat the treatment on badly affected areas after 10-15 minutes.
Areas to be treated
Painted & Timber Areas - Spray the area thoroughly with the MCS1 Mould Clear Solution.
Papered Areas - Spray the paper. The MCS1 Mould Clear Solution acts as a biocide and stripping agent. Bag the mould contaminated paper and remove from the property. Treat the exposed plaster with a thorough spraying of MCS1 Mould Clear Solution.
General Preparation - Once the surface is dry, scrape off any loose flaking paint and rub down. Previously painted surfaces must be etched using sandpaper.
The solution should cover approximately 12.5m².
MCS1 Mould Clear Solution contains Acticide 50x 4.76% w/w.
There is no individual Data Sheet for this product however the Mould Eradication Kit Data Sheet can be viewed below.
We've added to your cart