Lignum Timber Treatments | Woodworm Treatment
Lignum Pro I62.5 is an insecticide treatment based on micro-emulsion technology which produces a formulation with a particle size in the nanometre range. This tiny particle size allows the formulation to penetrate deep into the timber in order to deliver the active ingredient (insecticide) to prevent or eradicate wood boring insect attack.
Lignum Pro I62.5 insecticide is effective against all life stages of wood boring insects. It has virtually no odour and can be applied either by brush or low pressure spray to provide long lasting protection.
The formulation is water-based producing a non-flammable, quick drying product containing no volatile organic compounds (VOCs). The concentrated product is diluted with water.
Lignum Pro I62.5 carries the HSE Approval No 9894.
Supplied in 1 Litre containers, concentrated solution.
Dilutes to make 25 litres of Ready-to-use Product
BS EN Certification
Eradicated Wood Boring Insects
Microemulsion Water Based Formula
Permethrin 62.5g/L: A commonly used Pyrethroid Insecticide which has excellent efficacy against a wide range of wood boring insects.
The active ingredient in the formulation is sourced from and supplied by manufacturers who have supported the compound through the Biocidal Products Directive [98/8 EC] or more recently the Biocidal Products Regulations [528/2012] and in compliance with Article 95 of the Biocidal Products Regulation.
Lignum Pro I62.5 Insecticide is being supported under the European Biocidal Products Regulation [528/2012]. Efficacy of this product has been proven to industry established and European standards.
Wood should be clean and free from wood dust and other contaminants.
Apply by Brush or Low Pressure Spray.
Preventative: 200ml/m² (1L per 5m²)
Curative: 300ml/m² (1L per 3.3m²)
A 1 Litre Concentrate (once diluted) treats 82.5m² - 125m² of timber depending on use.
Product is touch dry in 1 hour depending on wood and ambient conditions. Unprotected persons and animals should be kept away from treated surfaces for 48 hours or until dry.
Product does not have a finish and leaves the same effect as applying water or solvent. It is always advisable to try on a small inconspicuous area before application to ensure product finish is as expected.
Product is stable in original packaging for 2 years when stored under ambient conditions. After 2 years product should be re-tested every 6 months to ensure active ingredient levels are within specification.
We've added to your cart