Soudal | Expanding Foam
Soudafoam Gap Filler Expanding Foam is a General Purpose Gap Filling Expanding Foam with a high 3D expansion. Soudafoam Gap Filler Expanding Foam has excellent thermal and acoustic insulation properties and is suitable for use a general gap filler in areas such as pipe penetrations, insulation and roofing materials etc...
Soudafoam Gun Grade cans are fitted with DuraValve™, a unique valve system that improves the yield and performance of Soudafoam products over much longer time periods than standard valves.
Supplied in 750ml Cans, available in Gun Grade application only.
Soudafoam Gap Filler Expanding Foam is a General Purpose Polyurethane Expanding Foam Filler with Gap Filling Formulation and high 3D expansion. Easy to use, one component with rapid curing.
Soudafoam Gap Filler Expanding Foam has excellent thermal and acoustic insulation properties with primerless adhesion on most construction materials.
This product is supplied in Gun Grade cans with DuraValve™
DuraValve™ is a unique valve system that improves the yield and performance of Soudafoam products over much longer time periods than standard valves.
DuraValve™ puts an end to commonly known issues such as poor yield and non-extrusion of PU Foams and is a standard for most gun applied Soudafoam Products.
Excellent adhesion on most substrates (except PTFE, PE and PP).
High insulation value, thermal and acoustic.
High filling capacities.
Excellent stability (no shrink or post expansion).
Very good bonding properties.
General Purpose Gap Filling
Insulation and Roofing Materials
Product Basis: Polyurethane Foam Filler
Volume Yield FEICA TM1002 (750ml Cannister): 34 Litres
Acoustic Rating ISO 717-1: 58 dB
Thermal Conductivity DIN 52612: 37mW/mK
Fire Class (DIN4102): B3 Fire Rated
Application Temperatures: +5°C to +30°C
Shake the aerosol can for at least 20 seconds. Attach the can onto the Applicator Gun. Surface should be free from grease and dust.
Moisten surfaces with a water sprayer prior to application.
For non-conventional substrates a preliminary adhesion test is recommended.
Fill holes and cavities approximately ¾ full as the foam will expand.
Repeat shaking regularly during application.
If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foam Cleaner or acetone.
Cured foam can only be removed mechanically or with Cured PU Foam Remover. Never burn away cured foam.
Take the usual labour hygiene into account.
Always wear gloves and goggles during application. See our Safety & PPE Products.
Consult label and material safety data sheet for more information.
We've added to your cart