Wykamol Group | Epoxy Floor Paint
EP40 Epoxy Floor Coating is a water-based, two-pack, easy to apply epoxy resin system with excellent adhesion to concrete, wood and other surfaces providing attractive, hard wearing dust-free finishes.
Supplied in 5kg (Two-Part) Packs, available in Grey or Clear colours.
EP40 Epoxy Floor Coating can be used as a liquid DPM Paint (Damp Proof Membrane Paint) at ground floor level.
Floors become easier to clean with an impervious finish and are substantially more resistant to damage by fork-lift trucks, chemicals, fuels and lubricants etc. EP40 Epoxy Floor Coating can be applied to new (green) concrete, 7 days after being poured.
EP40 Epoxy Floor Coating Damp Proof Paint has excellent resistance to fuels, oils and lubricants. All grades possess good resistance to dilute acids, alkalis, detergents, salt and sugar solutions.
Chemical spillages should always be wiped up as quickly as possible and not allowed to evaporate.
Available in 5Kg (Two-Part) Packs in Grey or Clear Colours.
EP40 Epoxy Floor Coating GREY: A general purpose epoxy resin finish suitable for use in most industrial environments, which dries from a semigloss to a semi-matt finish depending on temperature and humidity.
EP40 Epoxy Floor Coating CLEAR: A clear coating for sealing concrete or for use where a primer is required prior to application of EP40 Epoxy Floor Coating Grey. A primer is required for porous surfaces, high build and anti-slip finishes.
EP40 Epoxy Floor Coating, being low-odour, is ideal for use in domestic properties, kitchens and basements as well as the food industry, dairies, breweries, bakeries etc. where solvent based products are prohibited.
The hardwearing properties and resistance to chemical and oil spillages make EP40 Epoxy Floor Coating ideal for industrial units, warehouses, automotive workshops and general industrial usage.
EP40 Epoxy Floor Coating can be used as a liquid DPM (Damp Proof Membrane) at ground floor level.
NOTE 1: In order to achieve the best results from this product, it is recommended that the product be used only when temperatures in excess of 10°C are present with good ventilation.
NOTE 2: Variations in temperature and humidity during the cure period can significantly affect the rate of drying and surface finish.
EP40 Epoxy Floor Coating has excellent resistance to fuels,oils and lubricants. All grades possess good resistance to dilute acids, alkalis, detergents, salt and sugar solutions.
Chemical spillages should always be wiped up as quickly as possible and not allowed to evaporate. For further information,please consult our Technical Department.
Take the usual labour hygiene into account.
PPE should be worn during application. See our Safety & PPE Products.
Consult label and material safety data sheet for more information.
All surfaces to be coated with any grade of EP40 Epoxy Floor Coating should be dry, clean and free from laitance, oil, grease or other contaminants.
Ideally concrete surfaces should be vacuum shot blasted or mechanically abraded to both clean and open the surface to provide a good mechanical key.
The separate base and hardener components must be thoroughly mixed together before application.
One or two coats of EP40 Epoxy Floor Coating can be applied with a roller or brush.
Slip resistance can be achieved by specifying a three coat system. The first coat of EP40 Epoxy Floor Coating CLEAR being followed by one coat of EP40 Epoxy Floor Coating GREY, lightly scattered with anti-slip aggregates whilst still wet, at a rate of 50/100g per m².
Approx 6-8 m² per kg per coat (2 coats recommended).
EP40 Epoxy Floor Coating can be cleaned with water, or with good quality detergent or just brushed out. EP40 Epoxy Floor Coating coated floors should not be subject to hot water above 60°C or steam cleaning.
We've added to your cart